kernel/linux.git/drivers/target/target_core_device.c, branch v6.12.80

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-10-19T19:52:19+00:00

Pull SCSI fixes from James Bottomley: "Fixes all in drivers. The largest is the mpi3mr which corrects a phy count limit that should only apply to the controller but was being incorrectly applied to expander phys" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: target: core: Fix null-ptr-deref in target_alloc_device() scsi: mpi3mr: Validate SAS port assignments scsi: ufs: core: Set SDEV_OFFLINE when UFS is shut down scsi: ufs: core: Requeue aborted request scsi: ufs: core: Fix the issue of ICU failure

scsi: target: core: Fix null-ptr-deref in target_alloc_device()

2024-10-16T02:25:52+00:00

There is a null-ptr-deref issue reported by KASAN: BUG: KASAN: null-ptr-deref in target_alloc_device+0xbc4/0xbe0 [target_core_mod] ... kasan_report+0xb9/0xf0 target_alloc_device+0xbc4/0xbe0 [target_core_mod] core_dev_setup_virtual_lun0+0xef/0x1f0 [target_core_mod] target_core_init_configfs+0x205/0x420 [target_core_mod] do_one_initcall+0xdd/0x4e0 ... entry_SYSCALL_64_after_hwframe+0x76/0x7e In target_alloc_device(), if allocing memory for dev queues fails, then dev will be freed by dev->transport->free_device(), but dev->transport is not initialized at that time, which will lead to a null pointer reference problem. Fixing this bug by freeing dev with hba->backend->ops->free_device(). Fixes: 1526d9f10c61 ("scsi: target: Make state_list per CPU") Signed-off-by: Wang Hai Link: https://lore.kernel.org/r/20241011113444.40749-1-wanghai38@huawei.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen

move asm/unaligned.h to linux/unaligned.h

2024-10-02T21:23:23+00:00

asm/unaligned.h is always an include of asm-generic/unaligned.h; might as well move that thing to linux/unaligned.h and include that - there's nothing arch-specific in that header. auto-generated by the following: for i in `git grep -l -w asm/unaligned.h`; do sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i done for i in `git grep -l -w asm-generic/unaligned.h`; do sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i done git mv include/asm-generic/unaligned.h include/linux/unaligned.h git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h

scsi: target: Remove unused list 'device_list'

2024-05-07T01:40:51+00:00

Commit be50f538e9a5 ("target: remove g_device_list") made 'g_device_list' local as 'device_list' but also removed the last use of it, the code that added the device to it. Build tested only. Signed-off-by: Dr. David Alan Gilbert Link: https://lore.kernel.org/r/20240503234419.171823-1-linux@treblig.org Signed-off-by: Martin K. Petersen

scsi: target: core: Add TMF to tmr_list handling

2024-01-12T02:43:06+00:00

An abort that is responded to by iSCSI itself is added to tmr_list but does not go to target core. A LUN_RESET that goes through tmr_list takes a refcounter on the abort and waits for completion. However, the abort will be never complete because it was not started in target core. Unable to locate ITT: 0x05000000 on CID: 0 Unable to locate RefTaskTag: 0x05000000 on CID: 0. wait_for_tasks: Stopping tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop wait for tasks: tmf LUN_RESET with tag 0x0 ref_task_tag 0x0 i_state 34 t_state ISTATE_PROCESSING refcnt 2 transport_state active,stop,fabric_stop ... INFO: task kworker/0:2:49 blocked for more than 491 seconds. task:kworker/0:2 state:D stack: 0 pid: 49 ppid: 2 flags:0x00000800 Workqueue: events target_tmr_work [target_core_mod] Call Trace: __switch_to+0x2c4/0x470 _schedule+0x314/0x1730 schedule+0x64/0x130 schedule_timeout+0x168/0x430 wait_for_completion+0x140/0x270 target_put_cmd_and_wait+0x64/0xb0 [target_core_mod] core_tmr_lun_reset+0x30/0xa0 [target_core_mod] target_tmr_work+0xc8/0x1b0 [target_core_mod] process_one_work+0x2d4/0x5d0 worker_thread+0x78/0x6c0 To fix this, only add abort to tmr_list if it will be handled by target core. Signed-off-by: Dmitry Bogdanov Link: https://lore.kernel.org/r/20240111125941.8688-1-d.bogdanov@yadro.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-11-03T01:13:50+00:00

Pull SCSI updates from James Bottomley: "Updates to the usual drivers (ufs, megaraid_sas, lpfc, target, ibmvfc, scsi_debug) plus the usual assorted minor fixes and updates. The major change this time around is a prep patch for rethreading of the driver reset handler API not to take a scsi_cmd structure which starts to reduce various drivers' dependence on scsi_cmd in error handling" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (132 commits) scsi: ufs: core: Leave space for '\0' in utf8 desc string scsi: ufs: core: Conversion to bool not necessary scsi: ufs: core: Fix race between force complete and ISR scsi: megaraid: Fix up debug message in megaraid_abort_and_reset() scsi: aic79xx: Fix up NULL command in ahd_done() scsi: message: fusion: Initialize return value in mptfc_bus_reset() scsi: mpt3sas: Fix loop logic scsi: snic: Remove useless code in snic_dr_clean_pending_req() scsi: core: Add comment to target_destroy in scsi_host_template scsi: core: Clean up scsi_dev_queue_ready() scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler() scsi: target: core: Fix kernel-doc comment scsi: pmcraid: Fix kernel-doc comment scsi: core: Handle depopulation and restoration in progress scsi: ufs: core: Add support for parsing OPP scsi: ufs: core: Add OPP support for scaling clocks and regulators scsi: ufs: dt-bindings: common: Add OPP table scsi: scsi_debug: Add param to control sdev's allow_restart scsi: scsi_debug: Add debugfs interface to fail target reset scsi: scsi_debug: Add new error injection type: Reset LUN failed ...

scsi: target: Allow userspace to request direct submissions

2023-10-13T19:53:58+00:00

This allows userspace to request the fabric drivers do direct submissions if they support it. With the new device file, submit_type, users can write 0 - 2 to control how commands are submitted to the backend: 0 - TARGET_FABRIC_DEFAULT_SUBMIT - LIO will use the fabric's default submission type. This is the default for compat. 1 - TARGET_DIRECT_SUBMIT - LIO will submit the cmd to the backend from the calling context if the fabric the cmd was received on supports it, else it will use the fabric's default type. 2 - TARGET_QUEUE_SUBMIT - LIO will queue the cmd to the LIO submission workqueue which will pass it to the backend. When using an NVMe drive and vhost-scsi with direct submission we see around a 20% improvement in 4K I/Os: fio jobs 1 2 4 8 10 -------------------------------------------------- defer 94K 190K 394K 770K 890K direct 128K 252K 488K 950K - And when using the queueing mode, we now no longer see issues like where the iSCSI tx thread is blocked in the block layer waiting on a tag so it can't respond to a nop or perform I/Os for other LUs. Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230928020907.5730-6-michael.christie@oracle.com Signed-off-by: Martin K. Petersen

scsi: target: core: Fix deadlock due to recursive locking

2023-09-27T14:55:29+00:00

The following call trace shows a deadlock issue due to recursive locking of mutex "device_mutex". First lock acquire is in target_for_each_device() and second in target_free_device(). PID: 148266 TASK: ffff8be21ffb5d00 CPU: 10 COMMAND: "iscsi_ttx" #0 [ffffa2bfc9ec3b18] __schedule at ffffffffa8060e7f #1 [ffffa2bfc9ec3ba0] schedule at ffffffffa8061224 #2 [ffffa2bfc9ec3bb8] schedule_preempt_disabled at ffffffffa80615ee #3 [ffffa2bfc9ec3bc8] __mutex_lock at ffffffffa8062fd7 #4 [ffffa2bfc9ec3c40] __mutex_lock_slowpath at ffffffffa80631d3 #5 [ffffa2bfc9ec3c50] mutex_lock at ffffffffa806320c #6 [ffffa2bfc9ec3c68] target_free_device at ffffffffc0935998 [target_core_mod] #7 [ffffa2bfc9ec3c90] target_core_dev_release at ffffffffc092f975 [target_core_mod] #8 [ffffa2bfc9ec3ca0] config_item_put at ffffffffa79d250f #9 [ffffa2bfc9ec3cd0] config_item_put at ffffffffa79d2583 #10 [ffffa2bfc9ec3ce0] target_devices_idr_iter at ffffffffc0933f3a [target_core_mod] #11 [ffffa2bfc9ec3d00] idr_for_each at ffffffffa803f6fc #12 [ffffa2bfc9ec3d60] target_for_each_device at ffffffffc0935670 [target_core_mod] #13 [ffffa2bfc9ec3d98] transport_deregister_session at ffffffffc0946408 [target_core_mod] #14 [ffffa2bfc9ec3dc8] iscsit_close_session at ffffffffc09a44a6 [iscsi_target_mod] #15 [ffffa2bfc9ec3df0] iscsit_close_connection at ffffffffc09a4a88 [iscsi_target_mod] #16 [ffffa2bfc9ec3df8] finish_task_switch at ffffffffa76e5d07 #17 [ffffa2bfc9ec3e78] iscsit_take_action_for_connection_exit at ffffffffc0991c23 [iscsi_target_mod] #18 [ffffa2bfc9ec3ea0] iscsi_target_tx_thread at ffffffffc09a403b [iscsi_target_mod] #19 [ffffa2bfc9ec3f08] kthread at ffffffffa76d8080 #20 [ffffa2bfc9ec3f50] ret_from_fork at ffffffffa8200364 Fixes: 36d4cb460bcb ("scsi: target: Avoid that EXTENDED COPY commands trigger lock inversion") Signed-off-by: Junxiao Bi Link: https://lore.kernel.org/r/20230918225848.66463-1-junxiao.bi@oracle.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen

scsi: target: Replace all non-returning strlcpy() with strscpy()

2023-05-17T01:39:44+00:00

strlcpy() reads the entire source buffer first. This read may exceed the destination size limit. This is both inefficient and can lead to linear read overflows if a source string is not NUL-terminated [1]. In an effort to remove strlcpy() completely [2], replace strlcpy() here with strscpy(). No return values were used, so direct replacement is safe. [1] https://www.kernel.org/doc/html/latest/process/deprecated.html#strlcpy [2] https://github.com/KSPP/linux/issues/89 Signed-off-by: Azeem Shaikh Link: https://lore.kernel.org/r/20230516025322.2804923-1-azeemshaikh38@gmail.com Reviewed-by: Kees Cook Signed-off-by: Martin K. Petersen

Merge patch series "target: TMF and recovery fixes"

2023-03-24T21:39:15+00:00

Mike Christie says: The following patches apply over Martin's 6.4 branches and Linus's tree. They fix a couple regressions in iscsit that occur when there are TMRs executing and a connection is closed. It also includes Dimitry's fixes in related code paths for cmd cleanup when ERL2 is used and the write pending hang during conn cleanup. This version of the patchset brings it back to just regressions and fixes for bugs we have a lot of users hitting. I'm going to fix isert and get it hooked into iscsit properly in a second patchset, because this one was getting so large. I've also moved my cleanup type of patches for a 3rd patchset. Link: https://lore.kernel.org/r/20230319015620.96006-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen