kernel/linux.git/drivers/target/iscsi, branch v5.10.257

scsi: target: iscsi: Fix use-after-free in iscsit_dec_conn_usage_count()

2026-02-11T12:34:23+00:00

[ Upstream commit 9411a89e9e7135cc459178fa77a3f1d6191ae903 ] In iscsit_dec_conn_usage_count(), the function calls complete() while holding the conn->conn_usage_lock. As soon as complete() is invoked, the waiter (such as iscsit_close_connection()) may wake up and proceed to free the iscsit_conn structure. If the waiter frees the memory before the current thread reaches spin_unlock_bh(), it results in a KASAN slab-use-after-free as the function attempts to release a lock within the already-freed connection structure. Fix this by releasing the spinlock before calling complete(). Signed-off-by: Maurizio Lombardi Reported-by: Zhaojuan Guo Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260112165352.138606-2-mlombard@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Fix use-after-free in iscsit_dec_session_usage_count()

2026-02-11T12:34:23+00:00

[ Upstream commit 84dc6037390b8607c5551047d3970336cb51ba9a ] In iscsit_dec_session_usage_count(), the function calls complete() while holding the sess->session_usage_lock. Similar to the connection usage count logic, the waiter signaled by complete() (e.g., in the session release path) may wake up and free the iscsit_session structure immediately. This creates a race condition where the current thread may attempt to execute spin_unlock_bh() on a session structure that has already been deallocated, resulting in a KASAN slab-use-after-free. To resolve this, release the session_usage_lock before calling complete() to ensure all dereferences of the sess pointer are finished before the waiter is allowed to proceed with deallocation. Signed-off-by: Maurizio Lombardi Reported-by: Zhaojuan Guo Reviewed-by: Mike Christie Link: https://patch.msgid.link/20260112165352.138606-3-mlombard@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Fix timeout on deleted connection

2025-06-04T12:36:58+00:00

[ Upstream commit 7f533cc5ee4c4436cee51dc58e81dfd9c3384418 ] NOPIN response timer may expire on a deleted connection and crash with such logs: Did not receive response to NOPIN on CID: 0, failing connection for I_T Nexus (null),i,0x00023d000125,iqn.2017-01.com.iscsi.target,t,0x3d BUG: Kernel NULL pointer dereference on read at 0x00000000 NIP strlcpy+0x8/0xb0 LR iscsit_fill_cxn_timeout_err_stats+0x5c/0xc0 [iscsi_target_mod] Call Trace: iscsit_handle_nopin_response_timeout+0xfc/0x120 [iscsi_target_mod] call_timer_fn+0x58/0x1f0 run_timer_softirq+0x740/0x860 __do_softirq+0x16c/0x420 irq_exit+0x188/0x1c0 timer_interrupt+0x184/0x410 That is because nopin response timer may be re-started on nopin timer expiration. Stop nopin timer before stopping the nopin response timer to be sure that no one of them will be re-started. Signed-off-by: Dmitry Bogdanov Link: https://lore.kernel.org/r/20241224101757.32300-1-d.bogdanov@yadro.com Reviewed-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Fix buffer overflow in lio_target_nacl_info_show()

2023-09-23T09:01:08+00:00

[ Upstream commit 801f287c93ff95582b0a2d2163f12870a2f076d4 ] The function lio_target_nacl_info_show() uses sprintf() in a loop to print details for every iSCSI connection in a session without checking for the buffer length. With enough iSCSI connections it's possible to overflow the buffer provided by configfs and corrupt the memory. This patch replaces sprintf() with sysfs_emit_at() that checks for buffer boundries. Signed-off-by: Konstantin Shelekhin Link: https://lore.kernel.org/r/20230722152657.168859-2-k.shelekhin@yadro.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Prevent login threads from racing between each other

2023-06-28T08:28:14+00:00

[ Upstream commit 2a737d3b8c792400118d6cf94958f559de9c5e59 ] The tpg->np_login_sem is a semaphore that is used to serialize the login process when multiple login threads run concurrently against the same target portal group. The iscsi_target_locate_portal() function finds the tpg, calls iscsit_access_np() against the np_login_sem semaphore and saves the tpg pointer in conn->tpg; If iscsi_target_locate_portal() fails, the caller will check for the conn->tpg pointer and, if it's not NULL, then it will assume that iscsi_target_locate_portal() called iscsit_access_np() on the semaphore. Make sure that conn->tpg gets initialized only if iscsit_access_np() was successful, otherwise iscsit_deaccess_np() may end up being called against a semaphore we never took, allowing more than one thread to access the same tpg. Signed-off-by: Maurizio Lombardi Link: https://lore.kernel.org/r/20230508162219.1731964-4-mlombard@redhat.com Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsit: Free cmds before session free

2023-05-30T11:57:49+00:00

[ Upstream commit d8990b5a4d065f38f35d69bcd627ec5a7f8330ca ] Commands from recovery entries are freed after session has been closed. That leads to use-after-free at command free or NPE with such call trace: Time2Retain timer expired for SID: 1, cleaning up iSCSI session. BUG: kernel NULL pointer dereference, address: 0000000000000140 RIP: 0010:sbitmap_queue_clear+0x3a/0xa0 Call Trace: target_release_cmd_kref+0xd1/0x1f0 [target_core_mod] transport_generic_free_cmd+0xd1/0x180 [target_core_mod] iscsit_free_cmd+0x53/0xd0 [iscsi_target_mod] iscsit_free_connection_recovery_entries+0x29d/0x320 [iscsi_target_mod] iscsit_close_session+0x13a/0x140 [iscsi_target_mod] iscsit_check_post_dataout+0x440/0x440 [iscsi_target_mod] call_timer_fn+0x24/0x140 Move cleanup of recovery enrties to before session freeing. Reported-by: Forza Signed-off-by: Dmitry Bogdanov Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230319015620.96006-7-michael.christie@oracle.com Reviewed-by: Maurizio Lombardi Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsit: Fix TAS handling during conn cleanup

2023-05-17T09:47:48+00:00

[ Upstream commit cc79da306ebb2edb700c3816b90219223182ac3c ] Fix a bug added in commit f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race"). If CMD_T_TAS is set on the se_cmd we must call iscsit_free_cmd() to do the last put on the cmd and free it, because the connection is down and we will not up sending the response and doing the put from the normal I/O path. Add a check for CMD_T_TAS in iscsit_release_commands_from_conn() so we now detect this case and run iscsit_free_cmd(). Fixes: f36199355c64 ("scsi: target: iscsi: Fix cmd abort fabric stop race") Signed-off-by: Mike Christie Link: https://lore.kernel.org/r/20230319015620.96006-9-michael.christie@oracle.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Fix an error message in iscsi_check_key()

2023-04-05T09:23:38+00:00

[ Upstream commit 6cc55c969b7ce8d85e09a636693d4126c3676c11 ] The first half of the error message is printed by pr_err(), the second half is printed by pr_debug(). The user will therefore see only the first part of the message and will miss some useful information. Link: https://lore.kernel.org/r/20230214141556.762047-1-mlombard@redhat.com Signed-off-by: Maurizio Lombardi Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: iscsi: Make sure the np under each tpg is unique

2022-02-16T11:54:19+00:00

[ Upstream commit a861790afaa8b6369eee8a88c5d5d73f5799c0c6 ] iscsit_tpg_check_network_portal() has nested for_each loops and is supposed to return true when a match is found. However, the tpg loop will still continue after existing the tpg_np loop. If this tpg_np is not the last the match value will be changed. Break the outer loop after finding a match and make sure the np under each tpg is unique. Link: https://lore.kernel.org/r/20220111054742.19582-1-mingzhe.zou@easystack.cn Signed-off-by: ZouMingzhe Reviewed-by: Mike Christie Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: target: cxgbit: Unmap DMA buffer before calling target_execute_cmd()

2021-07-14T14:56:53+00:00

commit 6ecdafaec79d4b3388a5b017245f23a0ff9d852d upstream. Instead of calling dma_unmap_sg() after completing WRITE I/O, call dma_unmap_sg() before calling target_execute_cmd() to sync the DMA buffer. Link: https://lore.kernel.org/r/1618403949-3443-1-git-send-email-varun@chelsio.com Cc: # 5.4+ Signed-off-by: Varun Prakash Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman