kernel/linux.git/drivers/staging, branch v6.18.39

staging: rtl8723bs: fix OOB write in HT_caps_handler()

2026-07-18T14:53:14+00:00

commit f8001e1a516ba3b495728c65b61f799cbfad6bd0 upstream. HT_caps_handler() iterates pIE->length bytes and writes into HT_caps.u.HT_cap[], which is a fixed 26-byte array (sizeof struct HT_caps_element). Because pIE->length is a raw u8 from an over-the-air 802.11 AssocResponse frame and is never validated, a malicious AP can set it up to 255, causing up to 229 bytes of out-of-bounds writes into adjacent fields of struct mlme_ext_info. Truncate the iteration count to the size of HT_caps.u.HT_cap using umin() so that data from a longer-than-expected IE is silently ignored rather than written out of bounds, preserving interoperability with APs that pad the element. An early return on oversized IEs was considered but rejected: it would bypass the pmlmeinfo->HT_caps_enable = 1 assignment that precedes the loop, silently disabling HT mode for APs that append extra bytes to the HT Capabilities IE. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Reviewed-by: Luka Gejak Link: https://patch.msgid.link/20260522004531.1038924-5-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman

staging: rtl8723bs: fix OOB reads in is_ap_in_tkip() IE loop

2026-07-18T14:53:14+00:00

commit 3bf39f711ff27c64be8680a8938bcc5001982e81 upstream. The loop in is_ap_in_tkip() iterates over IEs without verifying that enough bytes remain before dereferencing the IE header or its payload: - pIE->element_id and pIE->length are read without checking that i + sizeof(*pIE) <= ie_length, so a truncated IE at the end of the buffer causes an OOB read. - For WLAN_EID_VENDOR_SPECIFIC the code compares pIE->data + 12, which requires pIE->length >= 16. For WLAN_EID_RSN it compares pIE->data + 8, requiring pIE->length >= 12. Neither requirement is checked. Add the missing IE header and payload bounds checks and guard each data access with an explicit pIE->length minimum, matching the pattern established in update_beacon_info(). Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-7-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: rtl8723bs: fix OOB reads in IE loops in issue_assocreq() and join_cmd_hdl()

2026-07-18T14:53:14+00:00

commit ef61d628dfad38fead1fd2e08979ae9126d011d5 upstream. Two IE parsing loops are missing the header bounds checks before they dereference pIE->length: - issue_assocreq() walks pmlmeinfo->network.ies to build the association request. If the stored IE data ends with only an element_id byte and no length byte, pIE->length is read one byte past the end of the buffer. - join_cmd_hdl() walks pnetwork->ies during station join and has the same problem under the same conditions. Both buffers are filled from AP beacon and probe-response frames, so a malicious AP that sends a truncated final IE can trigger the issue. Apply the two-guard pattern established in update_beacon_info(): 1. Break if fewer than sizeof(*pIE) bytes remain. 2. Break if the IE's declared data extends past the buffer end. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Reviewed-by: Luka Gejak Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-3-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: rtl8723bs: fix OOB read in update_beacon_info() IE loop

2026-07-18T14:53:14+00:00

commit ed51de4a86e173c3b0ef78e039c2e49e08b11f16 upstream. The IE parsing loop in update_beacon_info() advances by (pIE->length + 2) each iteration but only guards on i < len. When a malicious AP sends a Beacon whose last IE has only one byte remaining in the frame (the element_id byte lands at len-1), the loop reads pIE->length from one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond len, passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past len. Also replace i += (pIE->length + 2) with i += sizeof(*pIE) + pIE->length for consistency with the sizeof(*pIE) guards added above. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Reviewed-by: Luka Gejak Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-2-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: rtl8723bs: fix OOB read in OnAssocRsp() IE loop

2026-07-18T14:53:14+00:00

commit f9654207e92283e0acac5d64fe5f8835383b5a23 upstream. The IE parsing loop in OnAssocRsp() advances by (pIE->length + 2) each iteration but only guards on i < pkt_len. When a malicious AP sends an AssocResponse whose last IE has only one byte remaining in the frame (the element_id byte lands at pkt_len-1), the loop reads pIE->length from pframe[pkt_len], which is one byte past the allocated receive buffer. Additionally, even when the header bytes are in bounds, pIE->length itself can extend the data window beyond pkt_len, silently passing a truncated IE to the handler functions. Add two guards at the top of the loop body: 1. Break if fewer than sizeof(*pIE) bytes remain (can't read header). 2. Break if the IE's declared data extends past pkt_len. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Reviewed-by: Luka Gejak Link: https://patch.msgid.link/20260522004531.1038924-6-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: rtl8723bs: fix WEP length underflow and OOB read in OnAuth()

2026-07-18T14:53:14+00:00

commit a1fc19d61f661d47204f095b593de507884849f7 upstream. OnAuth() has two bugs in the shared-key authentication path. When the Privacy bit is set, rtw_wep_decrypt() is called without verifying that the frame is long enough to contain a valid WEP IV and ICV. Inside rtw_wep_decrypt(), length is computed as: length = len - WLAN_HDR_A3_LEN - iv_len and then passed as (length - 4) to crc32_le(). If len is less than WLAN_HDR_A3_LEN + iv_len + icv_len (32 bytes), length - 4 is negative and, after the implicit cast to size_t, causes crc32_le() to read far beyond the frame buffer. Add a minimum length check before accessing the IV field and calling the decryption path. When processing a seq=3 response, rtw_get_ie() stores the Challenge Text IE length in ie_len, but the subsequent memcmp() always reads 128 bytes regardless of ie_len. IEEE 802.11 mandates a challenge text of exactly 128 bytes; reject any IE whose length field differs, matching the check already applied to OnAuthClient(). Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004605.1039209-1-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: rtl8723bs: fix heap buffer overflow in rtw_cfg80211_set_wpa_ie()

2026-07-18T14:53:14+00:00

commit 5a752a616e756844388a1a45404db9fc29fec655 upstream. supplicant_ie is a 256-byte array in struct security_priv. The WPA and WPA2 IE copy paths use: memcpy(padapter->securitypriv.supplicant_ie, &pwpa[0], wpa_ielen + 2); where wpa_ielen is the raw IE length field (u8, 0-255). When a local user supplies a connect request via nl80211 with a crafted WPA IE of length 255, wpa_ielen + 2 equals 257, overflowing the 256-byte buffer by one byte into the adjacent last_mic_err_time field. rtw_parse_wpa_ie() does not prevent this: its length consistency check compares *(wpa_ie+1) against (u8)(wpa_ie_len-2), which is (u8)(255) == 255 when wpa_ie_len = 257, so the check passes silently. Add explicit bounds checks for both the WPA and WPA2 paths before the memcpy, rejecting any IE whose total size (wpa_ielen + 2) exceeds the supplicant_ie buffer. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Cc: stable Reviewed-by: Luka Gejak Signed-off-by: Alexandru Hossu Link: https://patch.msgid.link/20260522004531.1038924-4-hossu.alexandru@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: media: ipu7: fix double-free and use-after-free in error paths

2026-07-18T14:53:14+00:00

commit d3a9a8cf2d7fd61a2f63df61f6cbc0a9bb007cc0 upstream. In both ipu7_isys_init() and ipu7_psys_init(), pdata is allocated and then passed to ipu7_bus_initialize_device(), which stores it in adev->pdata. The ipu7_bus_release() function frees adev->pdata when the device's reference count drops to zero. Two error paths incorrectly call kfree(pdata) after the device teardown has already freed it: 1. When ipu7_mmu_init() fails: put_device() is called, which drops the reference count to zero and triggers ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is a double-free. 2. When ipu7_bus_add_device() fails: it calls auxiliary_device_uninit() internally, which calls put_device() -> ipu7_bus_release() -> kfree(pdata). The subsequent kfree(pdata) is again a double-free. Note that the kfree(pdata) when ipu7_bus_initialize_device() itself fails is correct, because in that case auxiliary_device_init() failed and the release function was never set up, so pdata must be freed manually. Additionally, the error code was not saved before calling put_device(), causing ERR_CAST() to dereference the already-freed adev pointer when constructing the return value. Fix this by saving the error from dev_err_probe() before put_device() and returning ERR_PTR() instead. Remove the redundant kfree(pdata) calls and fix the use-after-free in the return values of the two affected error paths. Fixes: b7fe4c0019b1 ("media: staging/ipu7: add Intel IPU7 PCI device driver") Cc: stable@vger.kernel.org Reviewed-by: Dan Carpenter Signed-off-by: Alexandru Hossu Signed-off-by: Sakari Ailus Signed-off-by: Greg Kroah-Hartman

staging: media: atomisp: reduce load_primary_binaries() stack usage

2026-07-18T14:53:14+00:00

commit f4d51e55dd47ef467fbe37d8575e20eee41b092d upstream. The load_primary_binaries() function is overly complex and has som large variables on the stack, which can cause warnings depending on CONFIG_FRAME_WARN setting: drivers/staging/media/atomisp/pci/sh_css.c: In function 'load_primary_binaries': drivers/staging/media/atomisp/pci/sh_css.c:5260:1: error: the frame size of 1560 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] Half of the stack usage is for the prim_descr[] array, but only one member of the array is used at any given time. Reduce the stack usage by turning the array into a single structure. Fixes: a49d25364dfb ("staging/atomisp: Add support for the Intel IPU v2") Cc: stable@vger.kernel.org Signed-off-by: Arnd Bergmann Reviewed-by: Andy Shevchenko Signed-off-by: Sakari Ailus Signed-off-by: Greg Kroah-Hartman

media: staging: ipu3-imgu: Add range check for imgu_css_cfg_acc_stripe

2026-07-18T14:53:14+00:00

commit c32fe4c4918c9aa49f61359e3b42619c4d8686de upstream. If the driver's stripe information is invalid it can result in an integer underflow. Add a range check to avoid this kind of error. This patch fixes the following smatch error: drivers/staging/media/ipu3/ipu3-css-params.c:1792 imgu_css_cfg_acc_stripe() warn: 'acc->stripe.bds_out_stripes[0]->width - 2 * f' 4294967168 can't fit into 65535 'acc->stripe.bds_out_stripes[1]->offset' Cc: stable@vger.kernel.org Fixes: e11110a5b744 ("media: staging/intel-ipu3: css: Compute and program ccs") Signed-off-by: Ricardo Ribalda Signed-off-by: Hans Verkuil Signed-off-by: Greg Kroah-Hartman