kernel/linux.git/drivers/staging, branch v4.4.235

staging: comedi: addi_apci_1564: check INSN_CONFIG_DIGITAL_TRIG shift

2020-07-31T14:43:14+00:00

commit 926234f1b8434c4409aa4c53637aa3362ca07cea upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 1e15687ea472 ("staging: comedi: addi_apci_1564: add Change-of-State interrupt subdevice and required functions") Cc: #3.17+ Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20200717145257.112660-4-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman

staging: comedi: addi_apci_1500: check INSN_CONFIG_DIGITAL_TRIG shift

2020-07-31T14:43:14+00:00

commit fc846e9db67c7e808d77bf9e2ef3d49e3820ce5d upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this, adjusting the checks for invalid channels so that enabled channel bits that would have been lost by shifting are also checked for validity. Only channels 0 to 15 are valid. Fixes: a8c66b684efaf ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Cc: #4.0+: ef75e14a6c93: staging: comedi: verify array index is correct before using it Cc: #4.0+ Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20200717145257.112660-5-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman

staging: comedi: ni_6527: fix INSN_CONFIG_DIGITAL_TRIG support

2020-07-31T14:43:14+00:00

commit f07804ec77d77f8a9dcf570a24154e17747bc82f upstream. `ni6527_intr_insn_config()` processes `INSN_CONFIG` comedi instructions for the "interrupt" subdevice. When `data[0]` is `INSN_CONFIG_DIGITAL_TRIG` it is configuring the digital trigger. When `data[2]` is `COMEDI_DIGITAL_TRIG_ENABLE_EDGES` it is configuring rising and falling edge detection for the digital trigger, using a base channel number (or shift amount) in `data[3]`, a rising edge bitmask in `data[4]` and falling edge bitmask in `data[5]`. If the base channel number (shift amount) is greater than or equal to the number of channels (24) of the digital input subdevice, there are no changes to the rising and falling edges, so the mask of channels to be changed can be set to 0, otherwise the mask of channels to be changed, and the rising and falling edge bitmasks are shifted by the base channel number before calling `ni6527_set_edge_detection()` to change the appropriate registers. Unfortunately, the code is comparing the base channel (shift amount) to the interrupt subdevice's number of channels (1) instead of the digital input subdevice's number of channels (24). Fix it by comparing to 32 because all shift amounts for an `unsigned int` must be less than that and everything from bit 24 upwards is ignored by `ni6527_set_edge_detection()` anyway. Fixes: 110f9e687c1a8 ("staging: comedi: ni_6527: support INSN_CONFIG_DIGITAL_TRIG") Cc: # 3.17+ Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20200717145257.112660-2-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman

staging: comedi: addi_apci_1032: check INSN_CONFIG_DIGITAL_TRIG shift

2020-07-31T14:43:14+00:00

commit 0bd0db42a030b75c20028c7ba6e327b9cb554116 upstream. The `INSN_CONFIG` comedi instruction with sub-instruction code `INSN_CONFIG_DIGITAL_TRIG` includes a base channel in `data[3]`. This is used as a right shift amount for other bitmask values without being checked. Shift amounts greater than or equal to 32 will result in undefined behavior. Add code to deal with this. Fixes: 33cdce6293dcc ("staging: comedi: addi_apci_1032: conform to new INSN_CONFIG_DIGITAL_TRIG") Cc: #3.8+ Signed-off-by: Ian Abbott Link: https://lore.kernel.org/r/20200717145257.112660-3-abbotti@mev.co.uk Signed-off-by: Greg Kroah-Hartman

staging: wlan-ng: properly check endpoint types

2020-07-31T14:43:14+00:00

commit faaff9765664009c1c7c65551d32e9ed3b1dda8f upstream. As syzkaller detected, wlan-ng driver does not do sanity check of endpoints in prism2sta_probe_usb(), add check for xfer direction and type Reported-and-tested-by: syzbot+c2a1fa67c02faa0de723@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=c2a1fa67c02faa0de723 Signed-off-by: Rustam Kovhaev Cc: stable Link: https://lore.kernel.org/r/20200722161052.999754-1-rkovhaev@gmail.com Signed-off-by: Greg Kroah-Hartman

staging: comedi: verify array index is correct before using it

2020-07-22T07:10:05+00:00

[ Upstream commit ef75e14a6c935eec82abac07ab68e388514e39bc ] This code reads from the array before verifying that "trig" is a valid index. If the index is wildly out of bounds then reading from an invalid address could lead to an Oops. Fixes: a8c66b684efa ("staging: comedi: addi_apci_1500: rewrite the subdevice support functions") Signed-off-by: Dan Carpenter Reviewed-by: Ian Abbott Link: https://lore.kernel.org/r/20200709102936.GA20875@mwanda Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

staging: sm750fb: add missing case while setting FB_VISUAL

2020-06-30T00:07:50+00:00

[ Upstream commit fa90133377f4a7f15a937df6ad55133bb57c5665 ] Switch statement does not contain all cases: 8, 16, 24, 32. This patch will add missing one (24) Fixes: 81dee67e215b ("staging: sm750fb: add sm750 to staging") Signed-off-by: Matej Dujava Link: https://lore.kernel.org/r/1588277366-19354-2-git-send-email-mdujava@kocurkovo.cz Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin

staging: android: ion: use vmap instead of vm_map_ram

2020-06-20T08:23:20+00:00

[ Upstream commit 5bf9917452112694b2c774465ee4dbe441c84b77 ] vm_map_ram can keep mappings around after the vm_unmap_ram. Using that with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues. Signed-off-by: Christoph Hellwig Signed-off-by: Andrew Morton Acked-by: Greg Kroah-Hartman Acked-by: Peter Zijlstra (Intel) Cc: Christian Borntraeger Cc: Christophe Leroy Cc: Daniel Vetter Cc: David Airlie Cc: Gao Xiang Cc: Haiyang Zhang Cc: Johannes Weiner Cc: "K. Y. Srinivasan" Cc: Laura Abbott Cc: Mark Rutland Cc: Michael Kelley Cc: Minchan Kim Cc: Nitin Gupta Cc: Robin Murphy Cc: Sakari Ailus Cc: Stephen Hemminger Cc: Sumit Semwal Cc: Wei Liu Cc: Benjamin Herrenschmidt Cc: Catalin Marinas Cc: Heiko Carstens Cc: Paul Mackerras Cc: Vasily Gorbik Cc: Will Deacon Link: http://lkml.kernel.org/r/20200414131348.444715-4-hch@lst.de Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin

staging: rtl8712: Fix IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK

2020-06-11T07:21:40+00:00

commit 15ea976a1f12b5fd76b1bd6ff3eb5132fd28047f upstream. The value in shared headers was fixed 9 years ago in commit 8d661f1e462d ("ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro") and while looking at using shared headers for other duplicated constants I noticed this driver uses the old value. The macros are also defined twice in this file so I am deleting the second definition. Signed-off-by: Pascal Terjan Cc: stable Link: https://lore.kernel.org/r/20200523211247.23262-1-pterjan@google.com Signed-off-by: Greg Kroah-Hartman

iio: sca3000: Remove an erroneous 'get_device()'

2020-05-27T14:40:33+00:00

[ Upstream commit 928edefbc18cd8433f7df235c6e09a9306e7d580 ] This looks really unusual to have a 'get_device()' hidden in a 'dev_err()' call. Remove it. While at it add a missing \n at the end of the message. Fixes: 574fb258d636 ("Staging: IIO: VTI sca3000 series accelerometer driver (spi)") Signed-off-by: Christophe JAILLET Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin