kernel/linux.git/drivers/staging/Makefile, branch v4.19.77

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-08-23T20:52:46+00:00

Pull ARM SoC driver updates from Olof Johansson: "Some of the larger changes this merge window: - Removal of drivers for Exynos5440, a Samsung SoC that never saw widespread use. - Uniphier support for USB3 and SPI reset handling - Syste control and SRAM drivers and bindings for Allwinner platforms - Qualcomm AOSS (Always-on subsystem) reset controller drivers - Raspberry Pi hwmon driver for voltage - Mediatek pwrap (pmic) support for MT6797 SoC" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (52 commits) drivers/firmware: psci_checker: stash and use topology_core_cpumask for hotplug tests soc: fsl: cleanup Kconfig menu soc: fsl: dpio: Convert DPIO documentation to .rst staging: fsl-mc: Remove remaining files staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl staging: fsl-dpaa2: eth: move generic FD defines to DPIO soc: fsl: qe: gpio: Add qe_gpio_set_multiple usb: host: exynos: Remove support for Exynos5440 clk: samsung: Remove support for Exynos5440 soc: sunxi: Add the A13, A23 and H3 system control compatibles reset: uniphier: add reset control support for SPI cpufreq: exynos: Remove support for Exynos5440 ata: ahci-platform: Remove support for Exynos5440 soc: imx6qp: Use GENPD_FLAG_ALWAYS_ON for PU errata soc: mediatek: pwrap: add mt6351 driver for mt6797 SoCs soc: mediatek: pwrap: add pwrap driver for mt6797 SoCs soc: mediatek: pwrap: fix cipher init setting error dt-bindings: pwrap: mediatek: add pwrap support for MT6797 reset: uniphier: add USB3 core reset control dt-bindings: reset: uniphier: add USB3 core reset support ...

Merge tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

2018-08-18T18:00:00+00:00

Pull staging and IIO updates from Greg KH: "Here are the big staging/iio patches for 4.19-rc1. Lots of churn here, with tons of cleanups happening in staging drivers, a removal of an old crypto driver that no one was using (skein), and the addition of some new IIO drivers. Also added was a "gasket" driver from Google that needs loads of work and the erofs filesystem. Even with adding all of the new drivers and a new filesystem, we are only adding about 1000 lines overall to the kernel linecount, which shows just how much cleanup happened, and how big the unused crypto driver was. All of these have been in the linux-next tree for a while now with no reported issues" * tag 'staging-4.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (903 commits) staging:rtl8192u: Remove unused macro definitions - Style staging:rtl8192u: Add spaces around '+' operator - Style staging:rtl8192u: Remove stale comment - Style staging: rtl8188eu: remove unused mp_custom_oid.h staging: fbtft: Add spaces around / - Style staging: fbtft: Erases some repetitive usage of function name - Style staging: fbtft: Adjust some empty-line problems - Style staging: fbtft: Removes one nesting level to help readability - Style staging: fbtft: Changes gamma table to define. staging: fbtft: A bit more information on dev_err. staging: fbtft: Fixes some alignment issues - Style staging: fbtft: Puts macro arguments in parenthesis to avoid precedence issues - Style staging: rtl8188eu: remove unused array dB_Invert_Table staging: rtl8188eu: remove whitespace, add missing blank line staging: rtl8188eu: use is_multicast_ether_addr in rtw_sta_mgt.c staging: rtl8188eu: remove whitespace - style staging: rtl8188eu: cleanup block comment - style staging: rtl8188eu: use is_multicast_ether_addr in rtl8188eu_xmit.c staging: rtl8188eu: use is_multicast_ether_addr in recv_linux.c staging: rtlwifi: refactor rtl_get_tcb_desc ...

staging: erofs: update Kconfig and Makefile

2018-07-27T15:23:10+00:00

This commit adds Makefile and Kconfig for erofs, and updates Makefile and Kconfig files in the fs directory. Signed-off-by: Miao Xie Signed-off-by: Chao Yu Signed-off-by: Gao Xiang Signed-off-by: Greg Kroah-Hartman

staging: fsl-mc: Remove remaining files

2018-07-24T21:18:55+00:00

Remove the staging/drivers/fsl-mc directory from the staging area now that all the components have been moved to the main kernel areas. Signed-off-by: Roy Pledge Reviewed-by: Horia Geantă Reviewed-by: Ioana Radulescu Signed-off-by: Li Yang

staging: add driver for Xilinx AXI-Stream FIFO v4.1 IP core

2018-07-24T12:14:13+00:00

This IP core has read and write AXI-Stream FIFOs, the contents of which can be accessed from the AXI4 memory-mapped interface. This is useful for transferring data from a processor into the FPGA fabric. The driver creates a character device that can be read/written to with standard open/read/write/close. See Xilinx PG080 document for IP details. https://www.xilinx.com/support/documentation/ip_documentation/axi_fifo_mm_s/v4_1/pg080-axi-fifo-mm-s.pdf The driver currently supports only store-forward mode with a 32-bit AXI4 Lite interface. DOES NOT support: - cut-through mode - AXI4 (non-lite) Signed-off-by: Jacob Feder Signed-off-by: Greg Kroah-Hartman

staging: mt7621-gpio: remove driver from staging

2018-07-10T10:36:51+00:00

Remove driver from staging. It has been accepted in the linux-gpio tree. Signed-off-by: Sergio Paracuellos Signed-off-by: Greg Kroah-Hartman

drivers/staging: Gasket driver framework + Apex driver

2018-07-02T07:01:49+00:00

The Gasket (Google ASIC Software, Kernel Extensions, and Tools) kernel framework is a generic, flexible system that supports thin kernel drivers. Gasket kernel drivers are expected to handle opening and closing devices, mmap'ing BAR space as requested, a small selection of ioctls, and handling page table translation (covered below). Any other functions should be handled by userspace code. The Gasket common module is not enough to run a device. In order to customize the Gasket code for a given piece of hardware, a device specific module must be created. At a minimum, this module must define a struct gasket_driver_desc containing the device-specific data for use by the framework; in addition, the module must declare an __init function that calls gasket_register_device with the module's gasket_driver_desc struct. Finally, the driver must define an exit function that calls gasket_unregister_device with the module's gasket_driver_desc struct. One of the core assumptions of the Gasket framework is that precisely one process is allowed to have an open write handle to the device node at any given time. (That process may, once it has one write handle, open any number of additional write handles.) This is accomplished by tracking open and close data for each driver instance. Signed-off-by: Rob Springer Signed-off-by: John Joseph Signed-off-by: Simon Que Signed-off-by: Greg Kroah-Hartman

staging/skein: Remove Skein and Threefish code

2018-07-02T07:00:42+00:00

It's been four years since this was added. In the interim, skein has not seen any mainstream adoption. Same with the threefish block cipher upon which it's based. In the discussion over which hash algorithm will replace SHA1 in git, it's not one of the contenders. There's absolutely no reason to think that there is anything wrong with Skein or Threefish. The only reason for this removal is a lack of adoption. If a real user comes forward, I'd be happy to assist with integrating this code into mainline. Signed-off-by: Jason Cooper Signed-off-by: Greg Kroah-Hartman

staging: typec: tcpci: move tcpci drivers out of staging

2018-06-28T10:49:48+00:00

Move TCPCI(Typec port controller interface) driver and rt1711h driver out of staging. Signed-off-by: Li Jun Reviewed-by: Guenter Roeck Acked-by: Heikki Krogerus Signed-off-by: Greg Kroah-Hartman

staging: ipx: delete it from the tree

2018-06-05T17:23:26+00:00

The ipx code moved into the staging tree back in November 2017 and no one has complained or even noticed it was gone. Because of that, let's just delete it. Note, the ipx header files are not removed here, that will come later through the networking tree, as that takes a bit more work to unwind. Cc: Stephen Hemminger Cc: David S. Miller Signed-off-by: Greg Kroah-Hartman