kernel/linux.git/drivers/spi, branch v6.12.80

spi: tegra210-quad: Protect curr_xfer check in IRQ handler

2026-04-02T11:09:49+00:00

[ Upstream commit edf9088b6e1d6d88982db7eb5e736a0e4fbcc09e ] Now that all other accesses to curr_xfer are done under the lock, protect the curr_xfer NULL check in tegra_qspi_isr_thread() with the spinlock. Without this protection, the following race can occur: CPU0 (ISR thread) CPU1 (timeout path) ---------------- ------------------- if (!tqspi->curr_xfer) // sees non-NULL spin_lock() tqspi->curr_xfer = NULL spin_unlock() handle_*_xfer() spin_lock() t = tqspi->curr_xfer // NULL! ... t->len ... // NULL dereference! With this patch, all curr_xfer accesses are now properly synchronized. Although all accesses to curr_xfer are done under the lock, in tegra_qspi_isr_thread() it checks for NULL, releases the lock and reacquires it later in handle_cpu_based_xfer()/handle_dma_based_xfer(). There is a potential for an update in between, which could cause a NULL pointer dereference. To handle this, add a NULL check inside the handlers after acquiring the lock. This ensures that if the timeout path has already cleared curr_xfer, the handler will safely return without dereferencing the NULL pointer. Fixes: b4e002d8a7ce ("spi: tegra210-quad: Fix timeout handling") Signed-off-by: Breno Leitao Tested-by: Jon Hunter Acked-by: Jon Hunter Acked-by: Thierry Reding Link: https://patch.msgid.link/20260126-tegra_xfer-v2-6-6d2115e4f387@debian.org Signed-off-by: Mark Brown [ Minor conflict resolved. ] Signed-off-by: Jianqiang kang Signed-off-by: Greg Kroah-Hartman

spi: spi-fsl-lpspi: fix teardown order issue (UAF)

2026-04-02T11:09:41+00:00

[ Upstream commit b341c1176f2e001b3adf0b47154fc31589f7410e ] There is a teardown order issue in the driver. The SPI controller is registered using devm_spi_register_controller(), which delays unregistration of the SPI controller until after the fsl_lpspi_remove() function returns. As the fsl_lpspi_remove() function synchronously tears down the DMA channels, a running SPI transfer triggers the following NULL pointer dereference due to use after free: | fsl_lpspi 42550000.spi: I/O Error in DMA RX | Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [...] | Call trace: | fsl_lpspi_dma_transfer+0x260/0x340 [spi_fsl_lpspi] | fsl_lpspi_transfer_one+0x198/0x448 [spi_fsl_lpspi] | spi_transfer_one_message+0x49c/0x7c8 | __spi_pump_transfer_message+0x120/0x420 | __spi_sync+0x2c4/0x520 | spi_sync+0x34/0x60 | spidev_message+0x20c/0x378 [spidev] | spidev_ioctl+0x398/0x750 [spidev] [...] Switch from devm_spi_register_controller() to spi_register_controller() in fsl_lpspi_probe() and add the corresponding spi_unregister_controller() in fsl_lpspi_remove(). Fixes: 5314987de5e5 ("spi: imx: add lpspi bus driver") Signed-off-by: Marc Kleine-Budde Link: https://patch.msgid.link/20260319-spi-fsl-lpspi-fixes-v1-1-b433e435b2d8@pengutronix.de Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: use generic driver_override infrastructure

2026-04-02T11:09:39+00:00

[ Upstream commit cc34d77dd48708d810c12bfd6f5bf03304f6c824 ] When a driver is probed through __driver_attach(), the bus' match() callback is called without the device lock held, thus accessing the driver_override field without a lock, which can cause a UAF. Fix this by using the driver-core driver_override infrastructure taking care of proper locking internally. Note that calling match() from __driver_attach() without the device lock held is intentional. [1] Also note that we do not enable the driver_override feature of struct bus_type, as SPI - in contrast to most other buses - passes "" to sysfs_emit() when the driver_override pointer is NULL. Thus, printing "\n" instead of "(null)\n". Link: https://lore.kernel.org/driver-core/DGRGTIRHA62X.3RY09D9SOK77P@kernel.org/ [1] Reported-by: Gui-Dong Han Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220789 Fixes: 5039563e7c25 ("spi: Add driver_override SPI device attribute") Signed-off-by: Danilo Krummrich Link: https://patch.msgid.link/20260324005919.2408620-12-dakr@kernel.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: meson-spicc: Fix double-put in remove path

2026-04-02T11:09:39+00:00

[ Upstream commit 63542bb402b7013171c9f621c28b609eda4dbf1f ] meson_spicc_probe() registers the controller with devm_spi_register_controller(), so teardown already drops the controller reference via devm cleanup. Calling spi_controller_put() again in meson_spicc_remove() causes a double-put. Fixes: 8311ee2164c5 ("spi: meson-spicc: fix memory leak in meson_spicc_remove") Signed-off-by: Felix Gu Reviewed-by: Johan Hovold Link: https://patch.msgid.link/20260322-rockchip-v1-1-fac3f0c6dad8@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: sn-f-ospi: Fix resource leak in f_ospi_probe()

2026-04-02T11:09:39+00:00

[ Upstream commit ef3d549e1deb3466c61f3b01d22fc3fe3e5efb08 ] In f_ospi_probe(), when num_cs validation fails, it returns without calling spi_controller_put() on the SPI controller, which causes a resource leak. Use devm_spi_alloc_host() instead of spi_alloc_host() to ensure the SPI controller is properly freed when probe fails. Fixes: 1b74dd64c861 ("spi: Add Socionext F_OSPI SPI flash controller driver") Signed-off-by: Felix Gu Link: https://patch.msgid.link/20260319-sn-f-v1-1-33a6738d2da8@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: intel-pci: Add support for Nova Lake mobile SPI flash

2026-04-02T11:09:30+00:00

[ Upstream commit 85b731ad4bbf6eb3fedf267ab00be3596f148432 ] Add Intel Nova Lake PCD-H SPI serial flash PCI ID to the list of supported devices. Signed-off-by: Alan Borzeszkowski Acked-by: Mika Westerberg Link: https://patch.msgid.link/20260309153703.74282-1-alan.borzeszkowski@linux.intel.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin

spi: fix statistics allocation

2026-03-25T10:08:49+00:00

commit dee0774bbb2abb172e9069ce5ffef579b12b3ae9 upstream. The controller per-cpu statistics is not allocated until after the controller has been registered with driver core, which leaves a window where accessing the sysfs attributes can trigger a NULL-pointer dereference. Fix this by moving the statistics allocation to controller allocation while tying its lifetime to that of the controller (rather than using implicit devres). Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Cc: stable@vger.kernel.org # 6.0 Cc: David Jander Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260312151817.32100-3-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

spi: fix use-after-free on controller registration failure

2026-03-25T10:08:49+00:00

commit 8634e05b08ead636e926022f4a98416e13440df9 upstream. Make sure to deregister from driver core also in the unlikely event that per-cpu statistics allocation fails during controller registration to avoid use-after-free (of driver resources) and unclocked register accesses. Fixes: 6598b91b5ac3 ("spi: spi.c: Convert statistics to per-cpu u64_stats_t") Cc: stable@vger.kernel.org # 6.0 Cc: David Jander Signed-off-by: Johan Hovold Link: https://patch.msgid.link/20260312151817.32100-2-johan@kernel.org Signed-off-by: Mark Brown Signed-off-by: Greg Kroah-Hartman

spi: cadence-quadspi: Implement refcount to handle unbind during busy

2026-03-25T10:08:40+00:00

[ Upstream commit 7446284023e8ef694fb392348185349c773eefb3 ] driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation. Signed-off-by: Khairul Anuar Romli Reviewed-by: Matthew Gerlach Reviewed-by: Niravkumar L Rabara Link: https://patch.msgid.link/8704fd6bd2ff4d37bba4a0eacf5eba3ba001079e.1756168074.git.khairul.anuar.romli@altera.com Signed-off-by: Mark Brown Signed-off-by: Robert Garcia Signed-off-by: Greg Kroah-Hartman

spi: spidev: fix lock inversion between spi_lock and buf_lock

2026-03-04T12:21:29+00:00

[ Upstream commit 40534d19ed2afb880ecf202dab26a8e7a5808d16 ] The spidev driver previously used two mutexes, spi_lock and buf_lock, but acquired them in different orders depending on the code path: write()/read(): buf_lock -> spi_lock ioctl(): spi_lock -> buf_lock This AB-BA locking pattern triggers lockdep warnings and can cause real deadlocks: WARNING: possible circular locking dependency detected spidev_ioctl() -> mutex_lock(&spidev->buf_lock) spidev_sync_write() -> mutex_lock(&spidev->spi_lock) *** DEADLOCK *** The issue is reproducible with a simple userspace program that performs write() and SPI_IOC_WR_MAX_SPEED_HZ ioctl() calls from separate threads on the same spidev file descriptor. Fix this by simplifying the locking model and removing the lock inversion entirely. spidev_sync() no longer performs any locking, and all callers serialize access using spi_lock. buf_lock is removed since its functionality is fully covered by spi_lock, eliminating the possibility of lock ordering issues. This removes the lock inversion and prevents deadlocks without changing userspace ABI or behaviour. Signed-off-by: Fabian Godehardt Link: https://patch.msgid.link/20260211072616.489522-1-fg@emlix.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin