kernel/linux.git/drivers/spi/Makefile, branch linux-5.9.y

Merge series "mtd: spi-nor: Move cadence-qaudspi to spi-mem framework" from Vignesh Raghavendra :

2020-06-19T13:26:55+00:00

This series is a subset of "[PATCH v12 0/4] spi: cadence-quadspi: Add support for the Cadence QSPI controller" by Ramuthevar,Vadivel MuruganX that intended to move cadence-quadspi driver to spi-mem framework Those patches were trying to accomplish too many things in a single set of patches and need to split into smaller patches. This is reduced version of above series. Changes that are intended to make migration easy are split into separate patches. Patches 1 to 3 drop features that cannot be supported under spi-mem at the moment (backward compatibility is maintained). Patch 4-5 are trivial cleanups. Patch 6 does the actual conversion to spi-mem and patch 7 moves the driver to drivers/spi folder. I have tested both INDAC mode (used by non TI platforms like Altera SoCFPGA) and DAC mode (used by TI platforms) on TI EVMs. Patches to move move bindings over to "Documentation/devicetree/bindings/spi/" directory and also conversion of bindig doc to YAML will be posted separately. Support for Intel platform would follow that. Resend v3: Rebased onto v5.7-c1 v3: Split handling of probe deferral into separate patch (out of 5/6) Split dropping of redundant WREN to separate patch (out of 5/6) Fix a possible memleak due to lack of spi_master_put() Parse all SPI slave nodes in cqspi_setup_flash() Address misc comments from Tudor on v2 Rebase onto latest spi-nor/next v2: Rework patch 1/6 to keep "cdns,is-decoded-cs" property supported. Ramuthevar Vadivel Murugan (2): mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework spi: Move cadence-quadspi driver to drivers/spi/ Vignesh Raghavendra (6): mtd: spi-nor: cadence-quadspi: Make driver independent of flash geometry mtd: spi-nor: cadence-quadspi: Provide a way to disable DAC mode mtd: spi-nor: cadence-quadspi: Don't initialize rx_dma_complete on failure mtd: spi-nor: cadence-quadspi: Fix error path on failure to acquire reset lines mtd: spi-nor: cadence-quadspi: Handle probe deferral while requesting DMA channel mtd: spi-nor: cadence-quadspi: Drop redundant WREN in erase path drivers/mtd/spi-nor/controllers/Kconfig | 11 - drivers/mtd/spi-nor/controllers/Makefile | 1 - drivers/spi/Kconfig | 11 + drivers/spi/Makefile | 1 + .../spi-cadence-quadspi.c} | 541 +++++++----------- 5 files changed, 222 insertions(+), 343 deletions(-) rename drivers/{mtd/spi-nor/controllers/cadence-quadspi.c => spi/spi-cadence-quadspi.c} (74%) base-commit: b3a9e3b9622ae10064826dccb4f7a52bd88c7407 -- 2.26.2 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/

spi: Move cadence-quadspi driver to drivers/spi/

2020-06-19T13:26:54+00:00

Now that cadence-quadspi has been converted to use spi-mem framework, move it under drivers/spi/ Update license header to match SPI subsystem style Signed-off-by: Ramuthevar Vadivel Murugan Signed-off-by: Vignesh Raghavendra Reviewed-by: Tudor Ambarus Acked-by: Tudor Ambarus Link: https://lore.kernel.org/r/20200601070444.16923-9-vigneshr@ti.com Signed-off-by: Mark Brown

spi: add Renesas RPC-IF driver

2020-06-15T23:38:38+00:00

Add the SPI driver for the Renesas RPC-IF. It's the "front end" driver using the "back end" APIs in the main driver to talk to the real hardware. We only implement the 'spi-mem' interface -- there's no need to implement the usual SPI driver methods... Based on the original patch by Mason Yang . Signed-off-by: Sergei Shtylyov Link: https://lore.kernel.org/r/1ece0e6c-71af-f0f1-709e-571f4b0b4853@cogentembedded.com Signed-off-by: Mark Brown

spi: dw: Move Non-DMA code to the DW PCIe-SPI driver

2020-05-29T14:55:50+00:00

This is a preparation patch before adding the DW DMA support into the DW SPI MMIO driver. We need to unpin the Non-DMA-specific code from the intended to be generic DW APB SSI DMA code. This isn't that hard, since the most part of the spi-dw-mid.c driver in fact implements a generic DMA interface for the DW SPI controller driver. The only Intel MID specifics concern getting the max frequency from the MRST Clock Control Unit and fetching the DMA controller channels from corresponding PCIe DMA controller. Since first one is related with the SPI interface configuration we moved it' implementation into the DW PCIe-SPI driver module. After that former spi-dw-mid.c file can be just renamed to be the DW SPI DMA module optionally compiled in to the DW APB SSI core driver. Co-developed-by: Georgy Vlasov Co-developed-by: Ramil Zaripov Signed-off-by: Georgy Vlasov Signed-off-by: Ramil Zaripov Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Arnd Bergmann Cc: Feng Tang Cc: Rob Herring Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-11-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown

spi: dw: Add core suffix to the DW APB SSI core source file

2020-05-29T14:55:49+00:00

Generic DMA support is going to be part of the DW APB SSI core object. In order to preserve the kernel loadable module name as spi-dw.ko, let's add the "-core" suffix to the object with generic DW APB SSI code and build it into the target spi-dw.ko driver. Suggested-by: Andy Shevchenko Signed-off-by: Serge Semin Reviewed-by: Andy Shevchenko Cc: Georgy Vlasov Cc: Ramil Zaripov Cc: Alexey Malahov Cc: Thomas Bogendoerfer Cc: Feng Tang Cc: Rob Herring Cc: Arnd Bergmann Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-10-Sergey.Semin@baikalelectronics.ru Signed-off-by: Mark Brown

spi: spi-amd: Add AMD SPI controller driver support

2020-04-27T15:38:32+00:00

This driver supports SPI Controller for AMD SOCs.This driver supports SPI operations using FIFO mode of transfer. Signed-off-by: Sanjay R Mehta Signed-off-by: Mark Brown Link: https://lore.kernel.org/r/1587844788-33997-1-git-send-email-sanju.mehta@amd.com Signed-off-by: Mark Brown

Merge tag 'mtk-mtd-spi-move' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi into spi-5.7

2020-03-11T19:58:20+00:00

spi: Rewrite mtk-quadspi spi-nor driver with spi-mem This patchset from Chuanhong Guo adds a spi-mem driver for Mediatek SPI-NOR controller, which already has limited support by mtk-quadspi. This new driver can make use of full quadspi capability of this controller.

spi: add support for mediatek spi-nor controller

2020-03-11T19:56:07+00:00

This is a driver for mtk spi-nor controller using spi-mem interface. The same controller already has limited support provided by mtk-quadspi driver under spi-nor framework and this new driver is a replacement for the old one. Comparing to the old driver, this driver has following advantages: 1. It can handle any full-duplex spi transfer up to 6 bytes, and this is implemented using generic spi interface. 2. It take account into command opcode properly. The reading routine in this controller can only use 0x03 or 0x0b as opcode on 1-1-1 transfers, but old driver doesn't implement this properly. This driver checks supported opcode explicitly and use (1) to perform unmatched operations. 3. It properly handles SFDP reading. Old driver can't read SFDP due to the bug mentioned in (2). 4. It can do 1-2-2 and 1-4-4 fast reading on spi-nor. These two ops requires parsing SFDP, which isn't possible in old driver. And the old driver is only flagged to support 1-1-2 mode. 5. It takes advantage of the DMA feature in this controller for long reads and supports IRQ on DMA requests to free cpu cycles from polling status registers on long DMA reading. It achieves up to 17.5MB/s reading speed (1-4-4 mode) which is way faster than the old one. IRQ is implemented as optional to maintain backward compatibility. Signed-off-by: Chuanhong Guo Link: https://lore.kernel.org/r/20200306085052.28258-3-gch981213@gmail.com Signed-off-by: Mark Brown

spi: Add FSI-attached SPI controller driver

2020-03-10T14:11:57+00:00

There exists a set of SPI controllers on some POWER processors that may be accessed through the FSI bus. Add a driver to traverse the FSI CFAM engine that can access and drive the SPI controllers. This driver would typically be used by a baseboard management controller (BMC). The SPI controllers operate by means of programming a sequencing engine which automatically manages the usual SPI protocol buses. The driver programs each transfer into the sequencer as various operations specifying the slave chip and shifting data in and out on the lines. Signed-off-by: Eddie James Link: https://lore.kernel.org/r/20200306194118.18581-3-eajames@linux.ibm.com Signed-off-by: Mark Brown

spi: Add generic SPI multiplexer

2020-02-12T23:56:18+00:00

Add a SPI device driver that sits in-band and provides a SPI controller which supports chip selects via a mux-control. This enables extra SPI devices to be connected with limited native chip selects. Signed-off-by: Chris Packham Reviewed-by: Andy Shevchenko Link: https://lore.kernel.org/r/20200204032838.20739-3-chris.packham@alliedtelesis.co.nz Signed-off-by: Mark Brown