kernel/linux.git/drivers/soundwire, branch v6.6.132

soundwire: dmi-quirks: add mapping for Avell B.ON (OEM rebranded of NUC15)

2026-03-04T12:20:52+00:00

[ Upstream commit 59946373755d71dbd7614ba235e0093159f80b69 ] Avell B.ON is an OEM re-branded NUC15 'Bishop County' LAPBC510 and LAPBC710. Link: https://github.com/thesofproject/linux/issues/5529 Signed-off-by: Peter Ujfalusi Reviewed-by: Kai Vehmanen Reviewed-by: Bard Liao Link: https://patch.msgid.link/20251215130947.31385-1-peter.ujfalusi@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: Move handle_nested_irq outside of sdw_dev_lock

2025-08-28T14:28:28+00:00

[ Upstream commit ccb7bb13c00bcc3178d270da052635c56148bc16 ] The sdw_dev_lock protects the SoundWire driver callbacks against the probed flag, which is used to skip the callbacks if the driver gets removed. For more information see commit bd29c00edd0a ("soundwire: revisit driver bind/unbind and callbacks"). However, this lock is a frequent source of mutex inversions. Many audio operations eventually hit the hardware resulting in a SoundWire callback, this means that typically the driver has the locking order ALSA/ASoC locks -> sdw_dev_lock. Conversely, the IRQ comes in directly from the SoundWire hardware, but then will often want to access ALSA/ASoC, such as updating something in DAPM or an ALSA control. This gives the other lock order sdw_dev_lock -> ALSA/ASoC locks. When the IRQ handling was initially added to SoundWire this was through a callback mechanism. As such it required being covered by the lock because the callbacks are part of the sdw_driver structure and are thus present regardless of if the driver is currently probed. Since then a newer mechanism using the IRQ framework has been added, which is currently covered by the same lock but this isn't actually required. Handlers for the IRQ framework are registered in probe and should by released during remove, thus the IRQ framework will have already unbound the IRQ before the slave driver is removed. Avoid the aforementioned mutex inversion by moving the handle_nested_irq call outside of the sdw_dev_lock. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20250609143041.495049-3-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: amd: serialize amd manager resume sequence during pm_prepare

2025-08-28T14:28:28+00:00

[ Upstream commit 03837341790039d6f1cbf7a1ae7dfa2cb77ef0a4 ] During pm_prepare callback, pm_request_resume() delays SoundWire manager D0 entry sequence. Synchronize runtime resume sequence for amd_manager instance prior to invoking child devices resume sequence for both the amd power modes(ClockStop Mode and Power off mode). Change the power_mode_mask check and use pm_runtime_resume() in amd_pm_prepare() callback. Signed-off-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20250530054447.1645807-3-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: stream: restore params when prepare ports fail

2025-08-15T10:08:55+00:00

[ Upstream commit dba7d9dbfdc4389361ff3a910e767d3cfca22587 ] The bus->params should be restored if the stream is failed to prepare. The issue exists since beginning. The Fixes tag just indicates the first commit that the commit can be applied to. Fixes: 17ed5bef49f4 ("soundwire: add missing newlines in dynamic debug logs") Signed-off-by: Bard Liao Reviewed-by: Péter Ujfalusi Reviewed-by: Ranjani Sridharan Link: https://lore.kernel.org/r/20250626060952.405996-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: amd: fix for clearing command status register

2025-07-24T06:53:16+00:00

[ Upstream commit a628e69b6412dc02757a6a23f7f16ce0c14d71f1 ] To clear the valid result status, 1 should be written to ACP_SDW_IMM_CMD_STS register. Update the ACP_SW_IMM_CMD_STS register value as 1. Fixes: d8f48fbdfd9a ("soundwire: amd: Add support for AMD Manager driver") Signed-off-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20250620102617.73437-1-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: amd: fix for handling slave alerts after link is down

2025-07-24T06:53:16+00:00

[ Upstream commit 86a4371b76976158be875dc654ceee35c574b27b ] Sometimes, its observed that during system level suspend callback execution, after link is down, handling pending slave status workqueue results in mipi register access failures as shown below. soundwire sdw-master-0-0: trf on Slave 1 failed:-110 read addr 0 count 1 rt722-sdca sdw:0:0:025d:0722:01: SDW_DP0_INT recheck read failed:-110 rt722-sdca sdw:0:0:025d:0722:01: Slave 1 alert handling failed: -110 amd_sdw_manager amd_sdw_manager.0: SDW0 cmd response timeout occurred amd_sdw_manager amd_sdw_manager.0: command timeout for Slave 1 soundwire sdw-master-0-0: trf on Slave 1 failed:-110 write addr 5c count 1 amd_sdw_manager amd_sdw_manager.0: SDW0 previous cmd status clear failed amd_sdw_manager amd_sdw_manager.0: command timeout for Slave 1 soundwire sdw-master-0-0: trf on Slave 1 failed:-110 write addr 5d count 1 amd_sdw_manager amd_sdw_manager.0: SDW0 previous cmd status clear failed amd_sdw_manager amd_sdw_manager.0: command timeout for Slave 1 Cancel the pending slave status workqueue prior to initiating clock stop sequence during suspend callback execution for both the power modes. Fixes: 9cf1efc5ed2d ("soundwire: amd: add pm_prepare callback and pm ops support") Signed-off-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20250530054447.1645807-2-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: bus: Fix race on the creation of the IRQ domain

2025-06-04T12:42:17+00:00

[ Upstream commit fd15594ba7d559d9da741504c322b9f57c4981e5 ] The SoundWire IRQ domain needs to be created before any slaves are added to the bus, such that the domain is always available when needed. Move the call to sdw_irq_create() before the calls to sdw_acpi_find_slaves() and sdw_of_find_slaves(). Fixes: 12a95123bfe1 ("soundwire: bus: Allow SoundWire peripherals to register IRQ handlers") Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20250409122239.1396489-1-ckeepax@opensource.cirrus.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: amd: change the soundwire wake enable/disable sequence

2025-06-04T12:42:10+00:00

[ Upstream commit dcc48a73eae7f791b1a6856ea1bcc4079282c88d ] During runtime suspend scenario, SoundWire wake should be enabled and during system level suspend scenario SoundWire wake should be disabled. Implement the SoundWire wake enable/disable sequence as per design flow for SoundWire poweroff mode. Signed-off-by: Vijendar Mukunda Link: https://lore.kernel.org/r/20250207065841.4718-2-Vijendar.Mukunda@amd.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: slave: fix an OF node reference leak in soundwire slave device

2025-04-10T12:37:32+00:00

[ Upstream commit aac2f8363f773ae1f65aab140e06e2084ac6b787 ] When initializing a soundwire slave device, an OF node is stored to the device with refcount incremented. However, the refcount is not decremented in .release(), thus call of_node_put() in sdw_slave_release(). Fixes: a2e484585ad3 ("soundwire: core: add device tree support for slave devices") Signed-off-by: Joe Hattori Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20241205034844.2784964-1-joe@pf.is.s.u-tokyo.ac.jp Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin

soundwire: cadence: re-check Peripheral status with delayed_work

2024-10-17T13:24:18+00:00

[ Upstream commit f8c35d61ba01afa76846905c67862cdace7f66b0 ] The SoundWire peripheral enumeration is entirely based on interrupts, more specifically sticky bits tracking state changes. This patch adds a defensive programming check on the actual status reported in PING frames. If for some reason an interrupt was lost or delayed, the delayed work would detect a peripheral change of status after the bus starts. The 100ms defined for the delay is not completely arbitrary, if a Peripheral didn't join the bus within that delay then probably the hardware link is broken, and conversely if the detection didn't happen because of software issues the 100ms is still acceptable in terms of user experience. The overhead of the one-shot workqueue is minimal, and the mutual exclusion ensures that the interrupt and delayed work cannot update the status concurrently. Reviewed-by: Liam Girdwood Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20240805114921.88007-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul Signed-off-by: Sasha Levin