kernel/linux.git/drivers/soundwire/intel.c, branch v5.15.7

Merge tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

2021-09-01T17:29:29+00:00

Pull sound updates from Takashi Iwai: "There are a few intensive changes in ALSA core side at this time that helped with significant code reduction. Meanwhile we keep getting new stuff, so the total size still grows... Anyway, the below are some highlights in this development cycle. ALSA core: - New helpers to manage page allocations and card object with devres - Refactoring for memory allocation with wc-pages - A new PCM hardware flag SNDRV_PCM_INFO_EXPLICIT_SYNC for controlling the explicit sync of the stream control; it'll be used for ASoC SOF and non-coherent memory in future ASoC: - Lots of cleanups and improvements to the Intel drivers, including some new systems support - New support for AMD Vangoh, CUI CMM-4030D-261, Mediatek Mt8195, Renesas RZ/G2L Mediatek Mt8195, RealTek RT101P, Renesas RZ/G2L, Rockchip RK3568 S/PDIF USB-audio: - Re-organized the quirk handling and a new option quirk_flags - Fix for a regression in 5.14 code change for JACK - Quirks for Sony WALKMAN, Digidesign mbox HD-audio: - Enhanced support for CS8409 codec - More consistent shutdown behavior with the runtime PM - The model option can accept the PCI or codec SSID as an alias - Quirks for ASUS ROG, HP Spectre x360 Others: - Lots of code reduction in legacy drivers with devres helpers - FireWire MOTU 896HD support" * tag 'sound-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (421 commits) ASoC: Revert PCM trigger changes ALSA: usb-audio: Add lowlatency module option ALSA: hda/cs8409: Initialize Codec only in init fixup. ALSA: hda/cs8409: Ensure Type Detection is only run on startup when necessary ALSA: usb-audio: Work around for XRUN with low latency playback ALSA: pcm: fix divide error in snd_pcm_lib_ioctl ASoC: soc-pcm: test refcount before triggering ASoC: soc-pcm: protect BE dailink state changes in trigger ASoC: wcd9335: Disable irq on slave ports in the remove function ASoC: wcd9335: Fix a memory leak in the error handling path of the probe function ASoC: wcd9335: Fix a double irq free in the remove function ALSA: hda: Disable runtime resume at shutdown ASoC: rockchip: i2s: Add support for frame inversion ASoC: dt-bindings: rockchip: Add compatible strings for more SoCs ASoC: rockchip: i2s: Add compatible for more SoCs ASoC: rockchip: i2s: Make playback/capture optional ASoC: rockchip: i2s: Fixup config for DAIFMT_DSP_A/B ASoC: dt-bindings: rockchip: Document reset property for i2s ASoC: rockchip: i2s: Fix regmap_ops hang ASoC: rockchip: i2s: Improve dma data transfer efficiency ...

soundwire: intel: conditionally exit clock stop mode on system suspend

2021-08-23T12:10:33+00:00

Intel stress tests reported issues with the clock stop mode, specifically when trying to do a system suspend while the link is already pm_runtime suspended. In this case, we need to disable the shim wake, but when the PCI parent device is also pm_runtime suspended the SHIM registers are not accessible. Since this is an invalid corner case, this patch suggests a pm_runtime resume of the entire bus to full power (parent+child devices) before the system suspend so that the shim wake can be disabled. Unlike the suspend operation, the .prepare callbacks are propagated from root device to leaf devices. By adding a .prepare callback at the SoundWire link level, we can double-check the pm_runtime status of the device as well as its parent PCI device. When the problematic configuration is detected, the device is pm_runtime resumed - which by construction also resume its parent. An additional loop is added to resume all child devices. In theory we only need to restart the link, but doing so will also cause the physical devices to synchronize and re-initialize, while their Linux devices remain pm_runtime suspended. It's simpler to make sure the codec devices are fully resumed so that we don't have to deal with zombie states. This additional loop could have been avoided by adding a .prepare callback in SoundWire codec drivers. Functionally this would have been equivalent. The rationale for implementing a loop at the link level is only to reduce the amount of code required to deal at the codec level with an Intel corner case - in other words keep codec drivers independent from Intel platform-specific programming sequences. BugLink: https://github.com/thesofproject/linux/issues/2606 Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210818024954.16873-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: intel: skip suspend/resume/wake when link was not started

2021-08-23T12:10:33+00:00

The SoundWire Linux devices are created purely based on information provided by platform firmware (e.g. ACPI DSDT table). When the kernel finds a matching driver for the device address (_ADR), the probe will initialize required data structures and initialize pm ops. When the SoundWire link is started at a later point, the physical devices will synchronize on the SoundWire frames and report their attachment status, thereby triggering the enumeration and initialization of device registers. This two-step solution was a conscious design decision to allow e.g. a driver to use sideband mechanisms to turn power rails on. This can also allow OEMs to describe multiple platforms with the same DSDT table, the devices that are not physically present in hardware. The drawback of this approach is a bit of confusion, with more devices than are actually present in hardware. This results in 'ghost' devices, for which the driver successfully probes, but that will not generate any traffic on the bus. suspend-resume transitions are handled by drivers, and skipped when the devices are not physically present. This patch provides a work-around for a second-level of confusion in platform firmware: some platforms only use HDaudio links, but nevertheless expose SoundWire 'ghost' devices. This results in error messages in the Intel driver while trying to suspend/resume these links. The simplest solution is to add a boolean status flag to skip all suspend/resume/wake sequences if the link was never started. Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210818024954.16873-3-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: intel: fix potential race condition during power down

2021-08-23T12:10:33+00:00

The power down sequence sets the link_up flag as false outside of the mutex_lock. This is potentially unsafe. In additional the flow in that sequence can be improved by first testing if the link was powered, setting the link_up flag as false and proceeding with the power down. In case the CPA bits cannot be cleared, we only flag an error since we cannot deal with interrupts any longer. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210818024954.16873-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: move intel sdw register definitions to sdw_intel.h

2021-08-02T14:45:34+00:00

Those Intel sdw registers will be used by ASoC SOF drivers in the following commits. So move those definitions to sdw_intel.h and it can be visible to SOF drivers. Signed-off-by: Bard Liao Reviewed-by: Pierre-Louis Bossart Reviewed-by: Ranjani Sridharan Acked-By: Vinod Koul Link: https://lore.kernel.org/r/20210723115451.7245-2-yung-chuan.liao@linux.intel.com Signed-off-by: Mark Brown

soundwire: cadence: add paranoid check on self-clearing bits

2021-08-02T03:49:45+00:00

The Cadence IP exposes a small number of self-clearing bits in the MCP_CONTROL and MCP_CONFIG_UPDATE registers. We currently do not check that those bits are indeed cleared, e.g. during resume operations. That could lead to resuming peripheral devices too early. In addition, if we happen to read these registers, update one of the fields and write the register back, we may be writing stale data that might have been cleared in hardware. These sort of race conditions could lead to e.g. doing a hw_reset twice or stopping a clock that just restarted. There is no clear way of avoiding these potential race conditions other than making sure that these registers fields are cleared before any read-modify-write sequence. If we detect this sort of errors, we only log them since there is no clear recovery possible. The only way out is likely to restart the IP with a suspend/resume cycle. Note that the checks are performed before updating the registers, as well as after the Intel 'sync go' sequence in multi-link mode. That should cover both the start and end of suspend/resume hardware configurations. The Multi-Master mode gates the configuration updates until the 'sync go' signal is asserted, so we only check on init and after the end of the 'sync go' sequence. The duration of the usleep_range() was defined by the GSYNC frequency used in multi-master mode. With a 4kHz frequency, any configuration change might be deferred by up to 250us. Extending the range to 1000-1500us should guarantee that the configuration change is completed without any significant impact on the overall resume time. Suggested-by: Bard Liao Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210714051349.13064-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: intel: move to auxiliary bus

2021-06-14T04:42:26+00:00

Now that the auxiliary_bus exists, there's no reason to use platform devices as children of a PCI device any longer. This patch refactors the code by extending a basic auxiliary device with Intel link-specific structures that need to be passed between controller and link levels. This refactoring is much cleaner with no need for cross-pointers between device and link structures. Note that the auxiliary bus API has separate init and add steps, which requires more attention in the error unwinding paths. The main loop needs to deal with kfree() and auxiliary_device_uninit() for the current iteration before jumping to the common label which releases everything allocated in prior iterations. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Ranjani Sridharan Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210511052132.28150-1-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: intel: remove useless readl

2021-03-30T06:21:43+00:00

Cppcheck complains: drivers/soundwire/intel.c:564:15: style: Variable 'link_control' is assigned a value that is never used. [unreadVariable] link_control = intel_readl(shim, SDW_SHIM_LCTL); This looks like a leftover from a previous version, remove. Signed-off-by: Pierre-Louis Bossart Reviewed-by: Guennadi Liakhovetski Reviewed-by: Rander Wang Reviewed-by: Kai Vehmanen Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210302091122.13952-9-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: intel: add missing \n in dev_err()

2021-03-23T06:49:53+00:00

We fixed a lot of warnings in 2019 but the magic of copy-paste keeps adding new ones... Signed-off-by: Pierre-Louis Bossart Reviewed-by: Rander Wang Reviewed-by: Guennadi Liakhovetski Signed-off-by: Bard Liao Link: https://lore.kernel.org/r/20210323005855.20890-2-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul

soundwire: intel: add master quirks for bus clash and parity

2021-03-22T12:16:44+00:00

Now that we have declarations and bus support, add quirks for Intel platforms. Co-developed-by: Pierre-Louis Bossart Signed-off-by: Pierre-Louis Bossart Signed-off-by: Bard Liao Reviewed-by: Guennadi Liakhovetski Link: https://lore.kernel.org/r/20210302082720.12322-4-yung-chuan.liao@linux.intel.com Signed-off-by: Vinod Koul