kernel/linux.git/drivers/soc/tegra/fuse, branch v5.4.113

soc/tegra: fuse: Fix index bug in get_process_id

2020-12-30T10:50:58+00:00

commit b9ce9b0f83b536a4ac7de7567a265d28d13e5bea upstream. This patch simply fixes a bug of referencing speedos[num] in every for-loop iteration in get_process_id function. Fixes: 0dc5a0d83675 ("soc/tegra: fuse: Add Tegra210 support") Cc: Signed-off-by: Nicolin Chen Signed-off-by: Thierry Reding Signed-off-by: Greg Kroah-Hartman

soc/tegra: fuse: Fix build with Tegra194 configuration

2020-03-05T15:43:39+00:00

[ Upstream commit 6f4ecbe284df5f22e386a640d9a4b32cede62030 ] If only Tegra194 support is enabled, the tegra30_fuse_read() and tegra30_fuse_init() function are not declared and cause a build failure. Add Tegra194 to the preprocessor guard to make sure these functions are available for Tegra194-only builds as well. Link: https://lore.kernel.org/r/20200203143114.3967295-1-thierry.reding@gmail.com Reported-by: kbuild test robot Signed-off-by: Thierry Reding Signed-off-by: Olof Johansson Signed-off-by: Sasha Levin

soc/tegra: fuse: Correct straps' address for older Tegra124 device trees

2020-02-24T07:36:45+00:00

[ Upstream commit 2d9ea1934f8ef0dfb862d103389562cc28b4fc03 ] Trying to read out Chip ID before APBMISC registers are mapped won't succeed, in a result Tegra124 gets a wrong address for the HW straps register if machine uses an old outdated device tree. Fixes: 297c4f3dcbff ("soc/tegra: fuse: Restrict legacy code to 32-bit ARM") Signed-off-by: Dmitry Osipenko Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-07-20T00:13:56+00:00

Pull ARM SoC-related driver updates from Olof Johansson: "Various driver updates for platforms and a couple of the small driver subsystems we merge through our tree: - A driver for SCU (system control) on NXP i.MX8QXP - Qualcomm Always-on Subsystem messaging driver (AOSS QMP) - Qualcomm PM support for MSM8998 - Support for a newer version of DRAM PHY driver for Broadcom (DPFE) - Reset controller support for Bitmain BM1880 - TI SCI (System Control Interface) support for CPU control on AM654 processors - More TI sysc refactoring and rework" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (84 commits) reset: remove redundant null check on pointer dev soc: rockchip: work around clang warning dt-bindings: reset: imx7: Fix the spelling of 'indices' soc: imx: Add i.MX8MN SoC driver support soc: aspeed: lpc-ctrl: Fix probe error handling soc: qcom: geni: Add support for ACPI firmware: ti_sci: Fix gcc unused-but-set-variable warning firmware: ti_sci: Use the correct style for SPDX License Identifier soc: imx8: Use existing of_root directly soc: imx8: Fix potential kernel dump in error path firmware/psci: psci_checker: Park kthreads before stopping them memory: move jedec_ddr.h from include/memory to drivers/memory/ memory: move jedec_ddr_data.c from lib/ to drivers/memory/ MAINTAINERS: Remove myself as qcom maintainer soc: aspeed: lpc-ctrl: make parameter optional soc: qcom: apr: Don't use reg for domain id soc: qcom: fix QCOM_AOSS_QMP dependency and build errors memory: tegra: Fix -Wunused-const-variable firmware: tegra: Early resume BPMP soc/tegra: Select pinctrl for Tegra194 ...

Merge tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma

2019-07-17T16:55:43+00:00

Pull dmaengine updates from Vinod Koul: - Add support in dmaengine core to do device node checks for DT devices and update bunch of drivers to use that and remove open coding from drivers - New driver/driver support for new hardware, namely: - MediaTek UART APDMA - Freescale i.mx7ulp edma2 - Synopsys eDMA IP core version 0 - Allwinner H6 DMA - Updates to axi-dma and support for interleaved cyclic transfers - Greg's debugfs return value check removals on drivers - Updates to stm32-dma, hsu, dw, pl330, tegra drivers * tag 'dmaengine-5.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (68 commits) dmaengine: Revert "dmaengine: fsl-edma: add i.mx7ulp edma2 version support" dmaengine: at_xdmac: check for non-empty xfers_list before invoking callback Documentation: dmaengine: clean up description of dmatest usage dmaengine: tegra210-adma: remove PM_CLK dependency dmaengine: fsl-edma: add i.mx7ulp edma2 version support dt-bindings: dma: fsl-edma: add new i.mx7ulp-edma dmaengine: fsl-edma-common: version check for v2 instead dmaengine: fsl-edma-common: move dmamux register to another single function dmaengine: fsl-edma: add drvdata for fsl-edma dmaengine: Revert "dmaengine: fsl-edma: support little endian for edma driver" dmaengine: rcar-dmac: Reject zero-length slave DMA requests dmaengine: dw: Enable iDMA 32-bit on Intel Elkhart Lake dmaengine: dw-edma: fix semicolon.cocci warnings dmaengine: sh: usb-dmac: Use [] to denote a flexible array member dmaengine: dmatest: timeout value of -1 should specify infinite wait dmaengine: dw: Distinguish ->remove() between DW and iDMA 32-bit dmaengine: fsl-edma: support little endian for edma driver dmaengine: hsu: Revert "set HSU_CH_MTSR to memory width" dmagengine: pl330: add code to get reset property dt-bindings: pl330: document the optional resets property ...

Merge tag 'tegra-for-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/drivers

2019-06-25T12:42:42+00:00

soc: tegra: Changes for v5.3-rc1 This contains a set of minor fixes and cleanups for core Tegra drivers. * tag 'tegra-for-5.3-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: soc/tegra: Select pinctrl for Tegra194 soc/tegra: fuse: Do not log error message on deferred probe soc/tegra: pmc: Add comments clarifying wake events soc/tegra: pmc: Avoid crash for non-wake IRQs soc/tegra: pmc: Fail to allocate more than one wake IRQ Signed-off-by: Olof Johansson

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 282

2019-06-05T15:36:37+00:00

Based on 1 normalized pattern(s): this software is licensed under the terms of the gnu general public license version 2 as published by the free software foundation and may be copied distributed and modified under those terms this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 285 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Alexios Zavras Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141900.642774971@linutronix.de Signed-off-by: Greg Kroah-Hartman

soc/tegra: fuse: Do not log error message on deferred probe

2019-06-05T07:54:13+00:00

Recent changes have made it much more probable that clocks are not available yet when the FUSE driver is first probed. However, that is a situation that the driver can cope with just fine. To avoid confusion, don't output an error when this happens. Signed-off-by: Thierry Reding

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 201

2019-05-30T18:29:52+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms and conditions of the gnu general public license version 2 as published by the free software foundation this program is distributed in the hope it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not see http www gnu org licenses extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 228 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Steve Winslow Reviewed-by: Richard Fontana Reviewed-by: Alexios Zavras Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de Signed-off-by: Greg Kroah-Hartman

soc: tegra: fuse: Use dma_request_channel instead of __dma_request_channel()

2019-05-27T05:53:52+00:00

The __dma_request_channel() prototype has been changed to help to do device node validation, thus we can use dma_request_channel() instead of __dma_request_channel() to keep kernel bisectable. Signed-off-by: Baolin Wang Signed-off-by: Vinod Koul