kernel/linux.git/drivers/soc/tegra/cbb, branch v6.1.168

soc/tegra: cbb: Clear ERR_FORCE register with ERR_STATUS

2025-08-15T10:04:54+00:00

[ Upstream commit a0647bca8966db04b79af72851ebd04224a4da40 ] When error is injected with the ERR_FORCE register, then this register is not auto cleared on clearing the ERR_STATUS register. This causes repeated interrupts on error injection. To fix, set the ERR_FORCE to zero along with clearing the ERR_STATUS register after handling error. Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0") Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

soc/tegra: cbb: Check firewall before enabling error reporting

2022-12-31T12:31:50+00:00

[ Upstream commit 2927cf85f4877f417f884919de8e04ab9b362d32 ] To enable error reporting for a fabric to CCPLEX, we need to write its register for enabling error interrupt to CCPLEX during boot and later clear the error status register after error occurs. If a fabric's registers are protected and not accessible from CCPLEX, then accessing the registers will cause CBB firewall error. Add support to check whether write access from CCPLEX to the registers of a fabric is not blocked by it's firewall before enabling error reporting to CCPLEX for that fabric. Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0") Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

soc/tegra: cbb: Add checks for potential out of bound errors

2022-12-31T12:31:50+00:00

[ Upstream commit 55084947d6b48977c5122fbe443743a6c50c12bf ] Added checks to avoid potential out of bounds errors which can happen if the 'slave map' and 'CBB errors' arrays are not correct or latest where some entries are missing. Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0") Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

soc/tegra: cbb: Update slave maps for Tegra234

2022-12-31T12:31:50+00:00

[ Upstream commit cd1d719b47767f1970d02d18661122b649c35b00 ] Updating the slave map for fabrics and using the same maps for DCE, RCE and SCE as they all are a replica in Tegra234. Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding Stable-dep-of: 55084947d6b4 ("soc/tegra: cbb: Add checks for potential out of bound errors") Signed-off-by: Sasha Levin

soc/tegra: cbb: Use correct master_id mask for CBB NOC in Tegra194

2022-12-31T12:31:50+00:00

[ Upstream commit 33af51a652191d7b9fe449563594b0bdbeb93c2a ] In Tegra194 SoC, master_id bit range is different between cluster NOC and CBB NOC. Currently same bit range is used which results in wrong master_id value. Due to this, illegal accesses from the CCPLEX master do not result in a crash as expected. Fix this by using the correct range for the CBB NOC. Finally, it is only necessary to extract the master_id when the erd_mask_inband_err flag is set because when this is not set, a crash is always triggered. Fixes: b71344221466 ("soc/tegra: cbb: Add CBB 1.0 driver for Tegra194") Fixes: fc2f151d2314 ("soc/tegra: cbb: Add driver for Tegra234 CBB 2.0") Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin

soc/tegra: cbb: Add support for Tegra241 (Grace)

2022-09-15T10:41:36+00:00

Adding support for Tegra241 (Grace) which uses fabrics based on the CBB 2.0 architecture. Since Tegra241 requires ACPI, implement ACPI-based probe support. Fabrics reporting errors in Tegra241 are "CBB" and "BPMP". The CBB fabric connects various other CBB 2.0 based fabrics and also services the Initiators and Targets which are connected to itself. The BPMP fabric is present in the BPMP cluster. Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding

soc/tegra: cbb: Add driver for Tegra234 CBB 2.0

2022-09-15T10:41:36+00:00

Adding driver to handle errors from CBB version 2.0 which is used in Tegra234 SoC. The driver prints debug information about failed transaction on receiving interrupt from the error notifier. The error notifier collates the interrupts from various error monitor blocks and presents a single interrupt to the SoC interrupt controller. For timeout errors, the driver also does the lookup to find timed out clients and prints their client ID. Drivers for hardware that needs to be reset on timeout will have to call BPMP from the client IP's driver. BPMP firmware will also clear the timeout bit after resetting the IP so that next transactions are send to them after reset. Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding

soc/tegra: cbb: Add CBB 1.0 driver for Tegra194

2022-09-15T10:41:36+00:00

Adding driver to handle errors from Control Backbone (CBB) which are generated due to illegal accesses. CBB 1.0 is used in Tegra194 SoCs. When an error is reported from a NOC within CBB, the driver prints debug information about failed transaction like Error Code, Error Description, Master, Address, AXI ID, Cache, Protection, Security Group etc. It then causes system crash using BUG_ON() or call WARN() based on whether the error type is fatal or not. Signed-off-by: Sumit Gupta Signed-off-by: Thierry Reding