kernel/linux.git/drivers/soc/qcom, branch v7.0.11

soc: qcom: aoss: compare against normalized cooling state

2026-05-23T11:09:03+00:00

[ Upstream commit cd3c4670db3ffe997be9548c7a9db3952563cf14 ] qmp_cdev_set_cur_state() normalizes the requested state to a boolean (cdev_state = !!state). The existing early-return check compares qmp_cdev->state == state, which can be wrong if state is non-boolean (any non-zero value). Compare qmp_cdev->state against cdev_state instead, so the check matches the effective state and avoids redundant updates. Signed-off-by: Alok Tiwari Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260329195333.1478090-1-alok.a.tiwari@oracle.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: llcc: fix v1 SB syndrome register offset

2026-05-23T11:09:03+00:00

[ Upstream commit 24e7625df5ce065393249b78930781be593bc381 ] The llcc_v1_edac_reg_offset table uses 0x2304c for trp_ecc_sb_err_syn0, which is inconsistent with the surrounding TRP ECC registers (0x2034x) and with llcc_v2_1_edac_reg_offset, where trp_ecc_sb_err_syn0 is 0x2034c adjacent to trp_ecc_error_status0/1 at 0x20344/0x20348. Use 0x2034c for llcc v1 so the SB syndrome register follows the expected +0x4 progression from trp_ecc_error_status1. This fixes EDAC reading the wrong register for SB syndrome reporting. Fixes: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver") Signed-off-by: Alok Tiwari Reviewed-by: Manivannan Sadhasivam Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260330095118.2657362-1-alok.a.tiwari@oracle.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not available

2026-05-23T11:09:00+00:00

[ Upstream commit 91b59009c7d48b58dbc50fecb27f2ad20749a05a ] If OCMEM is declared in DT, it is expected that it is present and handled by the driver. The GPU driver will ignore -ENODEV error, which typically means that OCMEM isn't defined in DT. Let ocmem return -EPROBE_DEFER if it supposed to be used, but it is not probed (yet). Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260323-ocmem-v1-3-ad9bcae44763@oss.qualcomm.com [bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/ Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: register reasons for probe deferrals

2026-05-23T11:09:00+00:00

[ Upstream commit 9dfd69cd89cd6afa4723be9098979abeef3bb8c6 ] Instead of printing messages to the dmesg, let the message be recorded as a reason for the OCMEM client deferral. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Dmitry Baryshkov Reviewed-by: Brian Masney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260323-ocmem-v1-2-ad9bcae44763@oss.qualcomm.com [bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/ Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: make the core clock optional

2026-05-23T11:09:00+00:00

[ Upstream commit e8a61c51417c679d1a599fb36695e9d3b8d95514 ] OCMEM's core clock (aka RPM bus 2 clock) is being handled internally by the interconnect driver. Corresponding clock has been dropped from the SMD RPM clock driver. The users of the ocmem will vote on the ocmemnoc interconnect paths, making sure that ocmem is on. Make the clock optional, keeping it for compatibility with older DT. Fixes: d6edc31f3a68 ("clk: qcom: smd-rpm: Separate out interconnect bus clocks") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260323-ocmem-v1-1-ad9bcae44763@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ubwc: disable bank swizzling for Glymur platform

2026-05-23T11:08:59+00:00

[ Upstream commit e031e7ceac4ee04973bd77362c363734e79dd08c ] Due to the way the DDR controller is organized on Glymur, hardware engineers strongly recommended disabling UBWC bank swizzling on Glymur. Follow that recommendation. Fixes: 9b21c3bd2480 ("soc: qcom: ubwc: Add configuration Glymur platform") Signed-off-by: Dmitry Baryshkov Acked-by: Rob Clark Reviewed-by: Konrad Dybcio Reviewed-by: Abel Vesa Reviewed-by: Akhil P Oommen Reviewed-by: Akhil P Oommen Link: https://lore.kernel.org/r/20260228-fix-glymur-ubwc-v2-1-70819bd6a6b4@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: pmic_glink_altmode: Fix TBT->SAFE->!TBT transition

2026-03-19T02:51:11+00:00

Similar to the case of commit d48708500610 ("soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case"), leaving the TBT altmode makes pmic_glink_altmode report a SVID=TBT && mux_ctrl=0 message. Said commit reordered the check such that the SVID is processed before checking for NO_CONN. Rework this to take into account valid values of mux_ctrl first and hopefully solve this for good.. Fixes: d48708500610 ("soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case") Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20260317-topic-tbt_pg_fixup-v1-1-325b8647bc82@oss.qualcomm.com Signed-off-by: Bjorn Andersson

soc: qcom: pmic_glink_altmode: Fix SVID=DP && unconnected edge case

2026-03-16T01:44:28+00:00

The commit referenced in Fixes started evaluating the value of alt_port->mux_ctrl before checking the active SVID. This led to drm_aux_hpd_bridge_notify() no longer being called for the 'DP unplug' case. Perhaps somewhat interestingly, the firmware sends a notification with SVID=DP, mux_ctrl=MUX_CTRL_STATE_NO_CONN and pin_assignment=0 on unplug. 'pin_assignment' was previously interpreted as a bitfield excerpt from the second byte of the DP pg_altmode payload (and stored as an u8). That value is used in pmic_glink_altmode_sc8280xp_notify(), decremented by 1 (DPAM_HPD_A). Previously, this would result in an u8 underflow that would rollover to 0xff (which prior to the Fixes patch would have caused a pmic_glink_altmode_safe() and 'disconnected' bridge notification). That check was removed, without a replacement. Resolve this issue by making sure the SID=DP && mux_ctrl=NO_CONN combo once again results in a HPD bridge notification. Fixes: 0539c5a6fdef ("soc: qcom: pmic_glink_altmode: Consume TBT3/USB4 mode notifications") Reported-by: Abel Vesa Tested-by: Abel Vesa Signed-off-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260306-topic-pgaltmode_fixup-v1-1-ec154b2d8e89@oss.qualcomm.com Signed-off-by: Bjorn Andersson

soc: qcom: pd-mapper: Fix element length in servreg_loc_pfr_req_ei

2026-03-16T01:36:05+00:00

It looks element length declared in servreg_loc_pfr_req_ei for reason not matching servreg_loc_pfr_req's reason field due which we could observe decoding error on PD crash. qmi_decode_string_elem: String len 81 >= Max Len 65 Fix this by matching with servreg_loc_pfr_req's reason field. Fixes: 1ebcde047c54 ("soc: qcom: add pd-mapper implementation") Signed-off-by: Mukesh Ojha Reviewed-by: Dmitry Baryshkov Tested-by: Nikita Travkin Link: https://lore.kernel.org/r/20260129152320.3658053-2-mukesh.ojha@oss.qualcomm.com Signed-off-by: Bjorn Andersson

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds