kernel/linux.git/drivers/soc/qcom, branch v6.6.142

soc: qcom: aoss: compare against normalized cooling state

2026-05-23T11:03:17+00:00

[ Upstream commit cd3c4670db3ffe997be9548c7a9db3952563cf14 ] qmp_cdev_set_cur_state() normalizes the requested state to a boolean (cdev_state = !!state). The existing early-return check compares qmp_cdev->state == state, which can be wrong if state is non-boolean (any non-zero value). Compare qmp_cdev->state against cdev_state instead, so the check matches the effective state and avoids redundant updates. Signed-off-by: Alok Tiwari Fixes: 05589b30b21a ("soc: qcom: Extend AOSS QMP driver to support resources that are used to wake up the SoC.") Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260329195333.1478090-1-alok.a.tiwari@oracle.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: llcc: fix v1 SB syndrome register offset

2026-05-23T11:03:17+00:00

[ Upstream commit 24e7625df5ce065393249b78930781be593bc381 ] The llcc_v1_edac_reg_offset table uses 0x2304c for trp_ecc_sb_err_syn0, which is inconsistent with the surrounding TRP ECC registers (0x2034x) and with llcc_v2_1_edac_reg_offset, where trp_ecc_sb_err_syn0 is 0x2034c adjacent to trp_ecc_error_status0/1 at 0x20344/0x20348. Use 0x2034c for llcc v1 so the SB syndrome register follows the expected +0x4 progression from trp_ecc_error_status1. This fixes EDAC reading the wrong register for SB syndrome reporting. Fixes: c13d7d261e36 ("soc: qcom: llcc: Pass LLCC version based register offsets to EDAC driver") Signed-off-by: Alok Tiwari Reviewed-by: Manivannan Sadhasivam Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260330095118.2657362-1-alok.a.tiwari@oracle.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: return -EPROBE_DEFER is ocmem is not available

2026-05-23T11:03:16+00:00

[ Upstream commit 91b59009c7d48b58dbc50fecb27f2ad20749a05a ] If OCMEM is declared in DT, it is expected that it is present and handled by the driver. The GPU driver will ignore -ENODEV error, which typically means that OCMEM isn't defined in DT. Let ocmem return -EPROBE_DEFER if it supposed to be used, but it is not probed (yet). Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260323-ocmem-v1-3-ad9bcae44763@oss.qualcomm.com [bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/ Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: register reasons for probe deferrals

2026-05-23T11:03:16+00:00

[ Upstream commit 9dfd69cd89cd6afa4723be9098979abeef3bb8c6 ] Instead of printing messages to the dmesg, let the message be recorded as a reason for the OCMEM client deferral. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Signed-off-by: Dmitry Baryshkov Reviewed-by: Brian Masney Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260323-ocmem-v1-2-ad9bcae44763@oss.qualcomm.com [bjorn: s/ERR_PTR(dev_err_probe)/dev_err_ptr_probe/ Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: use scoped device node handling to simplify error paths

2026-05-23T11:03:16+00:00

[ Upstream commit f4c1c19f5c0e5cf2870df91dedc6b40400fd9c8a ] Obtain the device node reference with scoped/cleanup.h to reduce error handling and make the code a bit simpler. Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240813-b4-cleanup-h-of-node-put-other-v1-4-cfb67323a95c@linaro.org Signed-off-by: Bjorn Andersson Stable-dep-of: 9dfd69cd89cd ("soc: qcom: ocmem: register reasons for probe deferrals") Signed-off-by: Sasha Levin

soc: qcom: ocmem: make the core clock optional

2026-05-23T11:03:16+00:00

[ Upstream commit e8a61c51417c679d1a599fb36695e9d3b8d95514 ] OCMEM's core clock (aka RPM bus 2 clock) is being handled internally by the interconnect driver. Corresponding clock has been dropped from the SMD RPM clock driver. The users of the ocmem will vote on the ocmemnoc interconnect paths, making sure that ocmem is on. Make the clock optional, keeping it for compatibility with older DT. Fixes: d6edc31f3a68 ("clk: qcom: smd-rpm: Separate out interconnect bus clocks") Signed-off-by: Dmitry Baryshkov Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20260323-ocmem-v1-1-ad9bcae44763@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

usb: typec: ucsi: Move unregister out of atomic section

2026-03-25T10:05:59+00:00

[ Upstream commit 11bb2ffb679399f99041540cf662409905179e3a ] Commit '9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping")' moved the pmic_glink client list under a spinlock, as it is accessed by the rpmsg/glink callback, which in turn is invoked from IRQ context. This means that ucsi_unregister() is now called from atomic context, which isn't feasible as it's expecting a sleepable context. An effort is under way to get GLINK to invoke its callbacks in a sleepable context, but until then lets schedule the unregistration. A side effect of this is that ucsi_unregister() can now happen after the remote processor, and thereby the communication link with it, is gone. pmic_glink_send() is amended with a check to avoid the resulting NULL pointer dereference. This does however result in the user being informed about this error by the following entry in the kernel log: ucsi_glink.pmic_glink_ucsi pmic_glink.ucsi.0: failed to send UCSI write request: -5 Fixes: 9329933699b3 ("soc: qcom: pmic_glink: Make client-lock non-sleeping") Cc: stable@vger.kernel.org Reviewed-by: Heikki Krogerus Reviewed-by: Neil Armstrong Reviewed-by: Dmitry Baryshkov Tested-by: Amit Pundir Reviewed-by: Johan Hovold Tested-by: Johan Hovold Signed-off-by: Bjorn Andersson Link: https://lore.kernel.org/r/20240820-pmic-glink-v6-11-races-v3-2-eec53c750a04@quicinc.com Signed-off-by: Bjorn Andersson [ The context change is due to the commit 584e8df58942 ("usb: typec: ucsi: extract common code for command handling") in v6.11 which is irrelevant to the logic of this patch. ] Signed-off-by: Rahul Sharma Signed-off-by: Greg Kroah-Hartman

soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe

2026-03-04T12:19:36+00:00

[ Upstream commit 0da7824734d8d83e6a844dd0207f071cb0c50cf4 ] If cmd_db_magic_matches() fails after memremap() succeeds, the function returns -EINVAL without unmapping the memory region, causing a potential resource leak. Switch to devm_memremap to automatically manage the map resource. Fixes: 312416d9171a ("drivers: qcom: add command DB driver") Suggested-by: Dmitry Baryshkov Signed-off-by: Haotian Zhang Link: https://lore.kernel.org/r/20251216013933.773-1-vulab@iscas.ac.cn Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: smem: handle ENOMEM error during probe

2026-03-04T12:19:34+00:00

[ Upstream commit 0fe01a7955f4fef97e7cc6d14bfc5931c660402b ] Fail the driver probe if the region can't be mapped Signed-off-by: Jorge Ramirez-Ortiz Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST") Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251209074610.3751781-1-jorge.ramirez@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: fix device leak on lookup

2026-01-11T14:22:03+00:00

commit b5c16ea57b030b8e9428ec726e26219dfe05c3d9 upstream. Make sure to drop the reference taken to the ocmem platform device when looking up its driver data. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. Also note that commit 0ff027027e05 ("soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem") fixed the leak in a lookup error path, but the reference is still leaking on success. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Cc: stable@vger.kernel.org # 5.5: 0ff027027e05 Cc: Brian Masney Cc: Miaoqian Lin Signed-off-by: Johan Hovold Reviewed-by: Brian Masney Link: https://lore.kernel.org/r/20250926143511.6715-2-johan@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman