kernel/linux.git/drivers/soc/qcom, branch v6.18.21

soc: qcom: cmd-db: Use devm_memremap() to fix memory leak in cmd_db_dev_probe

2026-02-26T22:59:08+00:00

[ Upstream commit 0da7824734d8d83e6a844dd0207f071cb0c50cf4 ] If cmd_db_magic_matches() fails after memremap() succeeds, the function returns -EINVAL without unmapping the memory region, causing a potential resource leak. Switch to devm_memremap to automatically manage the map resource. Fixes: 312416d9171a ("drivers: qcom: add command DB driver") Suggested-by: Dmitry Baryshkov Signed-off-by: Haotian Zhang Link: https://lore.kernel.org/r/20251216013933.773-1-vulab@iscas.ac.cn Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: smem: handle ENOMEM error during probe

2026-02-26T22:59:07+00:00

[ Upstream commit 0fe01a7955f4fef97e7cc6d14bfc5931c660402b ] Fail the driver probe if the region can't be mapped Signed-off-by: Jorge Ramirez-Ortiz Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST") Reviewed-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20251209074610.3751781-1-jorge.ramirez@oss.qualcomm.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: ocmem: fix device leak on lookup

2026-01-02T11:57:29+00:00

commit b5c16ea57b030b8e9428ec726e26219dfe05c3d9 upstream. Make sure to drop the reference taken to the ocmem platform device when looking up its driver data. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. Also note that commit 0ff027027e05 ("soc: qcom: ocmem: Fix missing put_device() call in of_get_ocmem") fixed the leak in a lookup error path, but the reference is still leaking on success. Fixes: 88c1e9404f1d ("soc: qcom: add OCMEM driver") Cc: stable@vger.kernel.org # 5.5: 0ff027027e05 Cc: Brian Masney Cc: Miaoqian Lin Signed-off-by: Johan Hovold Reviewed-by: Brian Masney Link: https://lore.kernel.org/r/20250926143511.6715-2-johan@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

soc: qcom: pbs: fix device leak on lookup

2026-01-02T11:57:28+00:00

commit 94124bf253d24b13e89c45618a168d5a1d8a61e7 upstream. Make sure to drop the reference taken to the pbs platform device when looking up its driver data. Note that holding a reference to a device does not prevent its driver data from going away so there is no point in keeping the reference. Fixes: 5b2dd77be1d8 ("soc: qcom: add QCOM PBS driver") Cc: stable@vger.kernel.org # 6.9 Cc: Anjelique Melendez Signed-off-by: Johan Hovold Link: https://lore.kernel.org/r/20250926143511.6715-3-johan@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

soc: qcom: smem: fix hwspinlock resource leak in probe error paths

2025-12-18T13:02:43+00:00

[ Upstream commit dc5db35073a19f6d3c30bea367b551c1a784ef8f ] The hwspinlock acquired via hwspin_lock_request_specific() is not released on several error paths. This results in resource leakage when probe fails. Switch to devm_hwspin_lock_request_specific() to automatically handle cleanup on probe failure. Remove the manual hwspin_lock_free() in qcom_smem_remove() as devm handles it automatically. Fixes: 20bb6c9de1b7 ("soc: qcom: smem: map only partitions used by local HOST") Signed-off-by: Haotian Zhang Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20251029022733.255-1-vulab@iscas.ac.cn Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: gsbi: fix double disable caused by devm

2025-12-18T13:02:35+00:00

[ Upstream commit 2286e18e3937c69cc103308a8c1d4898d8a7b04f ] In the commit referenced by the Fixes tag, devm_clk_get_enabled() was introduced to replace devm_clk_get() and clk_prepare_enable(). While the clk_disable_unprepare() call in the error path was correctly removed, the one in the remove function was overlooked, leading to a double disable issue. Remove the redundant clk_disable_unprepare() call from gsbi_remove() to fix this issue. Since all resources are now managed by devres and will be automatically released, the remove function serves no purpose and can be deleted entirely. Fixes: 489d7a8cc286 ("soc: qcom: use devm_clk_get_enabled() in gsbi_probe()") Signed-off-by: Haotian Zhang Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/stable/20251020160215.523-1-vulab%40iscas.ac.cn Link: https://lore.kernel.org/r/20251020160215.523-1-vulab@iscas.ac.cn Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

Merge tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-10-02T00:32:51+00:00

Pull SoC driver updates from Arnd Bergmann: "Lots of platform specific updates for Qualcomm SoCs, including a new TEE subsystem driver for the Qualcomm QTEE firmware interface. Added support for the Apple A11 SoC in drivers that are shared with the M1/M2 series, among more updates for those. Smaller platform specific driver updates for Renesas, ASpeed, Broadcom, Nvidia, Mediatek, Amlogic, TI, Allwinner, and Freescale SoCs. Driver updates in the cache controller, memory controller and reset controller subsystems. SCMI firmware updates to add more features and improve robustness. This includes support for having multiple SCMI providers in a single system. TEE subsystem support for protected DMA-bufs, allowing hardware to access memory areas that managed by the kernel but remain inaccessible from the CPU in EL1/EL0" * tag 'soc-drivers-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (139 commits) soc/fsl/qbman: Use for_each_online_cpu() instead of for_each_cpu() soc: fsl: qe: Drop legacy-of-mm-gpiochip.h header from GPIO driver soc: fsl: qe: Change GPIO driver to a proper platform driver tee: fix register_shm_helper() pmdomain: apple: Add "apple,t8103-pmgr-pwrstate" dt-bindings: spmi: Add Apple A11 and T2 compatible serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus Documentation: tee: Add Qualcomm TEE driver tee: qcom: enable TEE_IOC_SHM_ALLOC ioctl tee: qcom: add primordial object tee: add Qualcomm TEE driver tee: increase TEE_MAX_ARG_SIZE to 4096 tee: add TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF tee: add TEE_IOCTL_PARAM_ATTR_TYPE_UBUF tee: add close_context to TEE driver operation ...

Merge tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/drivers

2025-09-23T20:56:36+00:00

More Qualcomm device driver updates for v6.18 Introduce support for loading firmware into the QUP serial engines from Linux, which allows deferring selection of which protocol (uart, i2c, spi, etc) a given SE should have until the OS loads. Also introduce the "object invoke" interface in the SCM driver, to provide interface to the Qualcomm TEE driver. * tag 'qcom-drivers-for-6.18-2' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: serial: qcom-geni: Load UART qup Firmware from linux side spi: geni-qcom: Load spi qup Firmware from linux side i2c: qcom-geni: Load i2c qup Firmware from linux side soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem soc: qcom: geni-se: Cleanup register defines and update copyright dt-bindings: qcom: se-common: Add QUP Peripheral-specific properties for I2C, SPI, and SERIAL bus firmware: qcom: scm: add support for object invocation firmware: qcom: tzmem: export shm_bridge create/delete Link: https://lore.kernel.org/r/20250921020225.595403-1-andersson@kernel.org Signed-off-by: Arnd Bergmann

soc: qcom: geni-se: Add support to load QUP SE Firmware via Linux subsystem

2025-09-17T18:49:58+00:00

In Qualcomm SoCs, firmware loading for Serial Engines (SE) within the QUP hardware has traditionally been managed by TrustZone (TZ). This restriction poses a significant challenge for developers, as it limits their ability to enable various protocols on any of the SEs from the Linux side, reducing flexibility. Load the firmware to QUP SE based on the 'firmware-name' property specified in devicetree at bootup time. Co-developed-by: Mukesh Kumar Savaliya Signed-off-by: Mukesh Kumar Savaliya Signed-off-by: Viken Dadhaniya Link: https://lore.kernel.org/r/20250911043256.3523057-4-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Bjorn Andersson

soc: qcom: geni-se: Cleanup register defines and update copyright

2025-09-17T18:49:36+00:00

Refactor register macros for consistency and clarity and remove redundant definitions and update naming for better alignment. Update copyright to include Qualcomm Technologies, Inc. Signed-off-by: Viken Dadhaniya Link: https://lore.kernel.org/r/20250911043256.3523057-3-viken.dadhaniya@oss.qualcomm.com Signed-off-by: Bjorn Andersson