kernel/linux.git/drivers/soc/qcom, branch v4.14.263

soc: qcom: smsm: Fix missed interrupts if state changes while masked

2021-09-22T09:45:20+00:00

[ Upstream commit e3d4571955050736bbf3eda0a9538a09d9fcfce8 ] The SMSM driver detects interrupt edges by tracking the last state it has seen (and has triggered the interrupt handler for). This works fine, but only if the interrupt does not change state while masked. For example, if an interrupt is unmasked while the state is HIGH, the stored last_value for that interrupt might still be LOW. Then, when the remote processor triggers smsm_intr() we assume that nothing has changed, even though the state might have changed from HIGH to LOW. Attempt to fix this by checking the current remote state before unmasking an IRQ. Use atomic operations to avoid the interrupt handler from interfering with the unmask function. This fixes modem crashes in some edge cases with the BAM-DMUX driver. Specifically, the BAM-DMUX interrupt handler is not called for the HIGH -> LOW smsm state transition if the BAM-DMUX driver is loaded (and therefore unmasks the interrupt) after the modem was already started: qcom-q6v5-mss 4080000.remoteproc: fatal error received: a2_task.c:3188: Assert FALSE failed: A2 DL PER deadlock timer expired waiting for Apps ACK Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Signed-off-by: Stephan Gerhold Link: https://lore.kernel.org/r/20210712135703.324748-2-stephan@gerhold.net Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: mdt_loader: Detect truncated read of segments

2021-05-22T08:57:29+00:00

[ Upstream commit 0648c55e3a21ccd816e99b6600d6199fbf39d23a ] Given that no validation of how much data the firmware loader read in for a given segment truncated segment files would best case result in a hash verification failure, without any indication of what went wrong. Improve this by validating that the firmware loader did return the amount of data requested. Fixes: 445c2410a449 ("soc: qcom: mdt_loader: Use request_firmware_into_buf()") Reviewed-by: Sibi Sankar Link: https://lore.kernel.org/r/20210107232526.716989-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: mdt_loader: Validate that p_filesz < p_memsz

2021-05-22T08:57:29+00:00

[ Upstream commit 84168d1b54e76a1bcb5192991adde5176abe02e3 ] The code validates that segments of p_memsz bytes of a segment will fit in the provided memory region, but does not validate that p_filesz bytes will, which means that an incorrectly crafted ELF header might write beyond the provided memory region. Fixes: 051fb70fd4ea ("remoteproc: qcom: Driver for the self-authenticating Hexagon v5") Reviewed-by: Sibi Sankar Link: https://lore.kernel.org/r/20210107233119.717173-1-bjorn.andersson@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: smp2p: Safely acquire spinlock without IRQs

2020-12-29T12:47:09+00:00

commit fc3e62e25c3896855b7c3d72df19ca6be3459c9f upstream. smp2p_update_bits() should disable interrupts when it acquires its spinlock. This is important because without the _irqsave, a priority inversion can occur. This function is called both with interrupts enabled in qcom_q6v5_request_stop(), and with interrupts disabled in ipa_smp2p_panic_notifier(). IRQ handling of spinlocks should be consistent to avoid the panic notifier deadlocking because it's sitting on the thread that's already got the lock via _request_stop(). Found via lockdep. Cc: stable@vger.kernel.org Fixes: 50e99641413e7 ("soc: qcom: smp2p: Qualcomm Shared Memory Point to Point") Reviewed-by: Bjorn Andersson Reviewed-by: Stephen Boyd Signed-off-by: Evan Green Link: https://lore.kernel.org/r/20200929133040.RESEND.1.Ideabf6dcdfc577cf39ce3d95b0e4aa1ac8b38f0c@changeid Signed-off-by: Bjorn Andersson Signed-off-by: Greg Kroah-Hartman

soc: qcom: smem: Use le32_to_cpu for comparison

2020-04-24T06:01:12+00:00

[ Upstream commit a216000f0140f415cec96129f777b5234c9d142f ] Endianness can vary in the system, add le32_to_cpu when comparing partition sizes from smem. Signed-off-by: Chris Lew Acked-by: Bjorn Andersson Signed-off-by: Andy Gross Signed-off-by: Lee Jones Signed-off-by: Greg Kroah-Hartman

soc: qcom: wcnss_ctrl: Avoid string overflow

2019-11-20T16:59:59+00:00

[ Upstream commit 4c96ed170d658d8826d94edec8ac93ee777981a2 ] 'chinfo.name' is used as a NUL-terminated string, but using strncpy() with the length equal to the buffer size may result in lack of the termination: drivers//soc/qcom/wcnss_ctrl.c: In function 'qcom_wcnss_open_channel': drivers//soc/qcom/wcnss_ctrl.c:284:2: warning: 'strncpy' specified bound 32 equals destination size [-Wstringop-truncation] strncpy(chinfo.name, name, sizeof(chinfo.name)); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ This changes it to use the safer strscpy() instead. Signed-off-by: Niklas Cassel Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross Signed-off-by: Sasha Levin

soc: qcom: gsbi: Fix error handling in gsbi_probe()

2019-04-05T20:31:36+00:00

[ Upstream commit 8cd09a3dd3e176c62da67efcd477a44a8d87185e ] If of_platform_populate() fails in gsbi_probe(), gsbi->hclk is left undisabled. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Alexey Khoroshilov Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross Signed-off-by: Sasha Levin

soc: qcom: wcnss_ctrl: Fix increment in NV upload

2018-05-30T05:52:35+00:00

[ Upstream commit 90c29ed7627b6b4aeb603ee197650173c8434512 ] hdr.len includes both the size of the header and the fragment, so using this when stepping through the firmware causes us to skip 16 bytes every chunk of 3072 bytes; causing only the first fragment to actually be valid data. Instead use fragment size steps through the firmware blob. Fixes: ea7a1f275cf0 ("soc: qcom: Introduce WCNSS_CTRL SMD client") Reported-by: Will Newton Signed-off-by: Bjorn Andersson Signed-off-by: Andy Gross Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

soc: qcom: smsm: fix child-node lookup

2018-03-24T10:01:27+00:00

[ Upstream commit 8804517e9fc16c10081ff5e42e7d80704973a8e2 ] Fix child-node lookup during probe, which ended up searching the whole device tree depth-first starting at the parent rather than just matching on its children. Note that the original premature free of the parent node has already been fixed separately. Also note that this pattern of looking up the first child node with a given property is rare enough that a generic helper is probably not warranted. Fixes: c97c4090ff72 ("soc: qcom: smsm: Add driver for Qualcomm SMSM") Fixes: 3e8b55411468 ("soc: qcom: smsm: fix of_node refcnting problem") Cc: Bjorn Andersson Cc: Rob Clark Signed-off-by: Johan Hovold Reviewed-by: Bjorn Andersson Signed-off-by: Andy Gross Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

License cleanup: add SPDX GPL-2.0 license identifier to files with no license

2017-11-02T10:10:55+00:00

Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart Reviewed-by: Philippe Ombredanne Reviewed-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman