kernel/linux.git/drivers/soc/qcom, branch linux-5.9.y

soc: qcom: rpmh-rsc: Sleep waiting for tcs slots to be free

2020-11-05T10:51:29+00:00

[ Upstream commit 2bc20f3c8487bd5bc4dd9ad2c06d2ba05fd4e838 ] The busy loop in rpmh_rsc_send_data() is written with the assumption that the udelay will be preempted by the tcs_tx_done() irq handler when the TCS slots are all full. This doesn't hold true when the calling thread is an irqthread and the tcs_tx_done() irq is also an irqthread. That's because kernel irqthreads are SCHED_FIFO and thus need to voluntarily give up priority by calling into the scheduler so that other threads can run. I see RCU stalls when I boot with irqthreads on the kernel commandline because the modem remoteproc driver is trying to send an rpmh async message from an irqthread that needs to give up the CPU for the rpmh irqthread to run and clear out tcs slots. rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-....: (1 GPs behind) idle=402/1/0x4000000000000002 softirq=2108/2109 fqs=4920 (t=21016 jiffies g=2933 q=590) Task dump for CPU 0: irq/11-smp2p R running task 0 148 2 0x00000028 Call trace: dump_backtrace+0x0/0x154 show_stack+0x20/0x2c sched_show_task+0xfc/0x108 dump_cpu_task+0x44/0x50 rcu_dump_cpu_stacks+0xa4/0xf8 rcu_sched_clock_irq+0x7dc/0xaa8 update_process_times+0x30/0x54 tick_sched_handle+0x50/0x64 tick_sched_timer+0x4c/0x8c __hrtimer_run_queues+0x21c/0x36c hrtimer_interrupt+0xf0/0x22c arch_timer_handler_phys+0x40/0x50 handle_percpu_devid_irq+0x114/0x25c __handle_domain_irq+0x84/0xc4 gic_handle_irq+0xd0/0x178 el1_irq+0xbc/0x180 save_return_addr+0x18/0x28 return_address+0x54/0x88 preempt_count_sub+0x40/0x88 _raw_spin_unlock_irqrestore+0x4c/0x6c ___ratelimit+0xd0/0x128 rpmh_rsc_send_data+0x24c/0x378 __rpmh_write+0x1b0/0x208 rpmh_write_async+0x90/0xbc rpmhpd_send_corner+0x60/0x8c rpmhpd_aggregate_corner+0x8c/0x124 rpmhpd_set_performance_state+0x8c/0xbc _genpd_set_performance_state+0xdc/0x1b8 dev_pm_genpd_set_performance_state+0xb8/0xf8 q6v5_pds_disable+0x34/0x60 [qcom_q6v5_mss] qcom_msa_handover+0x38/0x44 [qcom_q6v5_mss] q6v5_handover_interrupt+0x24/0x3c [qcom_q6v5] handle_nested_irq+0xd0/0x138 qcom_smp2p_intr+0x188/0x200 irq_thread_fn+0x2c/0x70 irq_thread+0xfc/0x14c kthread+0x11c/0x12c ret_from_fork+0x10/0x18 This busy loop naturally lends itself to using a wait queue so that each thread that tries to send a message will sleep waiting on the waitqueue and only be woken up when a free slot is available. This should make things more predictable too because the scheduler will be able to sleep tasks that are waiting on a free tcs instead of the busy loop we currently have today. Reviewed-by: Maulik Shah Reviewed-by: Douglas Anderson Tested-by: Stanimir Varbanov Cc: Douglas Anderson Cc: Maulik Shah Cc: Lina Iyer Signed-off-by: Stephen Boyd Link: https://lore.kernel.org/r/20200724211711.810009-1-sboyd@kernel.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: apr: Fixup the error displayed on lookup failure

2020-10-29T09:12:03+00:00

[ Upstream commit ba34f977c333f96c8acd37ec30e232220399f5a5 ] APR client incorrectly prints out "ret" variable on pdr_add_lookup failure, it should be printing the error value returned by the lookup instead. Fixes: 8347356626028 ("soc: qcom: apr: Add avs/audio tracking functionality") Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200915154232.27523-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

soc: qcom: pdr: Fixup array type of get_domain_list_resp message

2020-10-29T09:12:03+00:00

[ Upstream commit 7a366707bb6a93baeb1a9ef46c4b9c875e0132d6 ] The array type of get_domain_list_resp is incorrectly marked as NO_ARRAY. Due to which the following error was observed when using pdr helpers with the downstream proprietary pd-mapper. Fix this up by marking it as VAR_LEN_ARRAY instead. Err logs: qmi_decode_struct_elem: Fault in decoding: dl(2), db(27), tl(160), i(1), el(1) failed to decode incoming message PDR: tms/servreg get domain list txn wait failed: -14 PDR: service lookup for tms/servreg failed: -14 Tested-by: Rishabh Bhatnagar Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Rishabh Bhatnagar Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200914145807.1224-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin

treewide: Use fallthrough pseudo-keyword

2020-08-23T22:36:59+00:00

Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva

Merge branch 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs

2020-08-08T04:14:30+00:00

Pull misc vfs updates from Al Viro: "No common topic whatsoever in those, sorry" * 'work.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: fs: define inode flags using bit numbers iov_iter: Move unnecessary inclusion of crypto/hash.h dlmfs: clean up dlmfs_file_{read,write}() a bit

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2020-08-07T20:35:51+00:00

Pull clk updates from Stephen Boyd: "It looks like a smaller batch of clk updates this time around. In the core framework we just have some minor tweaks and a debugfs feature, so not much to see there. The driver updates are fairly well split between AT91 and Qualcomm clk support. Adding those two drivers together equals about 50% of the diffstat. Otherwise, the big amount of work this time was on supporting Broadcom's Raspberry Pi firmware clks. Highlights: Core: - Document clk_hw_round_rate() so it gets some more use - Remove unused __clk_get_flags() - Add a prepare/enable debugfs feature similar to rate setting New Drivers: - Add support for SAMA7G5 SoC clks - Enable CPU clks on Qualcomm IPQ6018 SoCs - Enable CPU clks on Qualcomm MSM8996 SoCs - GPU clk support for Qualcomm SM8150 and SM8250 SoCs - Audio clks on Qualcomm SC7180 SoCs - Microchip Sparx5 DPLL clk - Add support for the new Renesas RZ/G2H (R8A774E1) SoC Updates: - Make defines for bcm63xx-gate clks to use in DT - Support BCM2711 SoC firmware clks - Add HDMI clks for BCM2711 SoCs - Add RTC related clks on Ingenic SoCs - Support USB PHY clks on Ingenic SoCs - Support gate clks on BCM6318 SoCs - RMU and DMAC/GPIO clock support for Actions Semi S500 SoCs - Use poll_timeout functions in Rockchip clk driver - Support Rockchip rk3288w SoC variant - Mark mac_lbtest critical on Rockchip rk3188 - Add CAAM clock support for i.MX vf610 driver - Add MU root clock support for i.MX imx8mp driver - Amlogic g12: add neural network accelerator clock sources - Amlogic meson8: remove critical flag for main PLL divider - Amlogic meson8: add video decoder clock gates - Convert one more Renesas DT binding to json-schema - Enhance critical clock handling on Renesas platforms to only consider clocks that were enabled at boot time" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (79 commits) clk: qcom: gcc: Make disp gpll0 branch aon for sc7180/sdm845 ipq806x: gcc: add support for child probe clk: qcom: msm8996: Make symbol 'cpu_msm8996_clks' static clk: qcom: ipq8074: Add correct index for PCIe clocks clk: : drop a duplicated word clk: renesas: cpg-mssr: Add r8a774e1 support dt-bindings: clock: renesas,cpg-mssr: Document r8a774e1 clk: Drop duplicate selection in Kconfig clk: qcom: smd: Add support for MSM8992/4 rpm clocks clk: qcom: ipq8074: Add missing clocks for pcie dt-bindings: clock: qcom: ipq8074: Add missing bindings for PCIe Replace HTTP links with HTTPS ones: Common CLK framework clk: qcom: Add CPU clock driver for msm8996 dt-bindings: clk: qcom: Add bindings for CPU clock for msm8996 soc: qcom: Separate kryo l2 accessors from PMU driver clk: meson: meson8b: add the vclk2_en gate clock clk: meson: meson8b: add the vclk_en gate clock clk: qcom: Fix return value check in apss_ipq6018_probe() clk: bcm: dvp: Add missing module informations clk: meson: meson8b: Drop CLK_IS_CRITICAL from fclk_div2 ...

soc: qcom: geni: Fix unused label warning

2020-07-30T05:10:30+00:00

If CONFIG_SERIAL_EARLYCON is not set, gcc warns this: drivers/soc/qcom/qcom-geni-se.c: In function 'geni_se_probe' drivers/soc/qcom/qcom-geni-se.c:914:1: warning: label 'exit' defined but not used [-Wunused-label] exit: ^~~~ Fixes: 048eb908a1f2 ("soc: qcom-geni-se: Add interconnect support to fix earlycon crash") Signed-off-by: YueHaibing Link: https://lore.kernel.org/r/20200722020619.25988-1-yuehaibing@huawei.com Signed-off-by: Bjorn Andersson

soc: qcom: smd-rpm: Fix kerneldoc

2020-07-29T20:39:43+00:00

Fix W=1 compile warnings (invalid kerneldoc): drivers/soc/qcom/smd-rpm.c:35: warning: Function parameter or member 'dev' not described in 'qcom_smd_rpm' drivers/soc/qcom/smd-rpm.c:99: warning: Function parameter or member 'state' not described in 'qcom_rpm_smd_write' Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20200729074415.28393-2-krzk@kernel.org Signed-off-by: Bjorn Andersson

soc: qcom: pdr: Reorder the PD state indication ack

2020-07-28T06:09:25+00:00

The Protection Domains (PD) have a mechanism to keep its resources enabled until the PD down indication is acked. Reorder the PD state indication ack so that clients get to release the relevant resources before the PD goes down. Reviewed-by: Bjorn Andersson Reviewed-by: Rishabh Bhatnagar Fixes: fbe639b44a82 ("soc: qcom: Introduce Protection Domain Restart helpers") Reported-by: Rishabh Bhatnagar Signed-off-by: Sibi Sankar Link: https://lore.kernel.org/r/20200701195954.9007-1-sibis@codeaurora.org Signed-off-by: Bjorn Andersson

soc: qcom: smd-rpm: Add IPQ6018 compatible

2020-07-22T05:23:00+00:00

This patch adds a compatible for the rpm on the Qualcomm IPQ6018 platform. Signed-off-by: Kathiravan T Link: https://lore.kernel.org/r/1595225543-12127-3-git-send-email-kathirav@codeaurora.org Signed-off-by: Bjorn Andersson