kernel/linux.git/drivers/soc/qcom, branch linux-4.20.y

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

2018-10-29T22:16:01+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "The most noteworthy SoC driver changes this time include: - The TEE subsystem gains an in-kernel interface to access the TEE from device drivers. - The reset controller subsystem gains a driver for the Qualcomm Snapdragon 845 Power Domain Controller. - The Xilinx Zynq platform now has a firmware interface for its platform management unit. This contains a firmware "ioctl" interface that was a little controversial at first, but the version we merged solved that by not exposing arbitrary firmware calls to user space. - The Amlogic Meson platform gains a "canvas" driver that is used for video processing and shared between different high-level drivers. The rest is more of the usual, mostly related to SoC specific power management support and core drivers in drivers/soc: - Several Renesas SoCs (RZ/G1N, RZ/G2M, R-Car V3M, RZ/A2M) gain new features related to power and reset control. - The Mediatek mt8183 and mt6765 SoC platforms gain support for their respective power management chips. - A new driver for NXP i.MX8, which need a firmware interface for power management. - The SCPI firmware interface now contains support estimating power usage of performance states - The NVIDIA Tegra "pmc" driver gains a few new features, in particular a pinctrl interface for configuring the pads. - Lots of small changes for Qualcomm, in particular the "smem" device driver. - Some cleanups for the TI OMAP series related to their sysc controller. Additional cleanups and bugfixes in SoC specific drivers include the Meson, Keystone, NXP, AT91, Sunxi, Actions, and Tegra platforms" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (129 commits) firmware: tegra: bpmp: Implement suspend/resume support drivers: clk: Add ZynqMP clock driver dt-bindings: clock: Add bindings for ZynqMP clock driver firmware: xilinx: Add zynqmp IOCTL API for device control Documentation: xilinx: Add documentation for eemi APIs MAINTAINERS: imx: include drivers/firmware/imx path firmware: imx: add misc svc support firmware: imx: add SCU firmware driver support reset: Fix potential use-after-free in __of_reset_control_get() dt-bindings: arm: fsl: add scu binding doc soc: fsl: qbman: add interrupt coalesce changing APIs soc: fsl: bman_portals: defer probe after bman's probe soc: fsl: qbman: Use last response to determine valid bit soc: fsl: qbman: Add 64 bit DMA addressing requirement to QBMan soc: fsl: qbman: replace CPU 0 with any online CPU in hotplug handlers soc: fsl: qbman: Check if CPU is offline when initializing portals reset: qcom: PDC Global (Power Domain Controller) reset controller dt-bindings: reset: Add PDC Global binding for SDM845 SoCs reset: Grammar s/more then once/more than once/ bus: ti-sysc: Just use SET_NOIRQ_SYSTEM_SLEEP_PM_OPS ...

Merge tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

2018-10-26T19:09:58+00:00

Pull Devicetree updates from Rob Herring: "A bit bigger than normal as I've been busy this cycle. There's a few things with dependencies and a few things subsystem maintainers didn't pick up, so I'm taking them thru my tree. The fixes from Johan didn't get into linux-next, but they've been waiting for some time now and they are what's left of what subsystem maintainers didn't pick up. Summary: - Sync dtc with upstream version v1.4.7-14-gc86da84d30e4 - Work to get rid of direct accesses to struct device_node name and type pointers in preparation for removing them. New helpers for parsing DT cpu nodes and conversions to use the helpers. printk conversions to %pOFn for printing DT node names. Most went thru subystem trees, so this is the remainder. - Fixes to DT child node lookups to actually be restricted to child nodes instead of treewide. - Refactoring of dtb targets out of arch code. This makes the support more uniform and enables building all dtbs on c6x, microblaze, and powerpc. - Various DT binding updates for Renesas r8a7744 SoC - Vendor prefixes for Facebook, OLPC - Restructuring of some ARM binding docs moving some peripheral bindings out of board/SoC binding files - New "secure-chosen" binding for secure world settings on ARM - Dual licensing of 2 DT IRQ binding headers" * tag 'devicetree-for-4.20' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (78 commits) ARM: dt: relicense two DT binding IRQ headers power: supply: twl4030-charger: fix OF sibling-node lookup NFC: nfcmrvl_uart: fix OF child-node lookup net: stmmac: dwmac-sun8i: fix OF child-node lookup net: bcmgenet: fix OF child-node lookup drm/msm: fix OF child-node lookup drm/mediatek: fix OF sibling-node lookup of: Add missing exports of node name compare functions dt-bindings: Add OLPC vendor prefix dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus dt-bindings: thermal: samsung: Add SPDX license identifier dt-bindings: clock: samsung: Add SPDX license identifiers dt-bindings: timer: ostm: Add R7S9210 support dt-bindings: phy: rcar-gen2: Add r8a7744 support dt-bindings: can: rcar_can: Add r8a7744 support dt-bindings: timer: renesas, cmt: Document r8a7744 CMT support dt-bindings: watchdog: renesas-wdt: Document r8a7744 support dt-bindings: thermal: rcar: Add device tree support for r8a7744 Documentation: dt: Add binding for /secure-chosen/stdout-path dt-bindings: arm: zte: Move sysctrl bindings to their own doc ...

net/kconfig: Make QCOM_QMI_HELPERS available when COMPILE_TEST

2018-10-24T07:11:35+00:00

The networking merge brought in the experimental support for the Qualcomm ath10k system NOC, which selects QCOM_QMI_HELPERS as a dependency. But the ATH10K_SNOC option (which selects QCOM_QMI_HELPERS) depends on ARCH_QCOM || COMPILE_TEST in order to get wider build testing than just the unusual QCOM architecture build, while the QCOM_QMI_HELPERS option doesn't have that COMPILE_TEST option and is limited to only ARCH_QCOM. As a result, a "make allmodconfig" complains WARNING: unmet direct dependencies detected for QCOM_QMI_HELPERS Depends on [n]: ARCH_QCOM && NET [=y] Selected by [m]: - ATH10K_SNOC [=m] && NETDEVICES [=y] && WLAN [=y] && WLAN_VENDOR_ATH [=y] && ATH10K [=m] && (ARCH_QCOM || COMPILE_TEST [=y]) Fix the config-time warning by making QCOM_QMI_HELPERS available when COMPILE_TEST, since the result seems to build fine. Cc: Bjorn Andersson Cc: Govind Singh Cc: Kalle Valo Cc: David Miller Signed-off-by: Linus Torvalds

soc: Convert to using %pOFn instead of device_node.name

2018-10-04T19:16:01+00:00

In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Li Yang Cc: David Brown Cc: Jonathan Hunter Cc: Santosh Shilimkar Cc: linuxppc-dev@lists.ozlabs.org Cc: linux-arm-kernel@lists.infradead.org Cc: linux-soc@vger.kernel.org Acked-by: Thierry Reding Acked-by: Heiko Stuebner Acked-by: Qiang Zhao Acked-by: Andy Gross Signed-off-by: Rob Herring

soc: qcom: geni: geni_se_clk_freq_match() should always accept multiples

2018-09-24T04:28:01+00:00

The geni_se_clk_freq_match() has some strange semantics. Specifically it is defined with two modes: 1. It can find a clock that's an exact multiple of the requested rate 2. It can find a non-exact match but it can't handle multiples then ...but callers should always be able to handle a clock that is a multiple of the requested clock so mode #2 doesn't really make sense. Let's change the semantics so that the non-exact match can also accept multiples and then change the code to handle that. The only caller of this code is the unlanded SPI driver [1] which currently passes "exact = True", thus it should be safe to change the semantics in this way. ...and, in fact, the SPI driver should likely be modified to pass "exact = False" (with the new semantics) since that will allow it to work with SPI devices that request a clock rate that doesn't exactly match a rate we can make. [1] https://lkml.kernel.org/r/1535107336-2214-1-git-send-email-dkota@codeaurora.org Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver") Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Signed-off-by: Andy Gross

soc: qcom: geni: Don't ignore clk_round_rate() errors in geni_se_clk_tbl_get()

2018-09-24T04:28:01+00:00

The function clk_round_rate() is defined to return a "long", not an "unsigned long". That's because it might return a negative error code. Change the call in geni_se_clk_tbl_get() to check for errors. While we're at it, get rid of a useless init of "freq". NOTE: overall the idea that we should iterate over clk_round_rate() to try to reconstruct a table already present in the clock driver is questionable. Specifically: - This method relies on "clk_round_rate()" rounding up. - This method only works if the table is sorted and has no duplicates. ...this patch doesn't try to fix those problems, it just makes the error handling more correct. Fixes: eddac5af0654 ("soc: qcom: Add GENI based QUP Wrapper driver") Signed-off-by: Douglas Anderson Reviewed-by: Matthias Kaehlcke Signed-off-by: Andy Gross

soc: qcom: smem: a few last cleanups

2018-09-13T21:57:11+00:00

This patch contains several small cleanups: - In qcom_smem_enumerate_partitions(), change the "local_host" argument to have 16 bit unsigned type - Also in qcom_smem_enumerate_partitions(), change the type of the "host0" and "host1" local variables to be u16 - Fix error messages reporting host ids to use the right format specifier - Shorten the error messages as well, to fit on one line - Add a compile-time check to ensure the local host value passed to qcom_smem_enumerate_partitions() is in range Signed-off-by: Alex Elder Signed-off-by: Andy Gross

soc: qcom: smem: verify partition host ids match

2018-09-13T21:57:10+00:00

Add verification in qcom_smem_partition_header() that the host ids found in a partition's header structure match those in its partition table entry. Signed-off-by: Alex Elder Signed-off-by: Andy Gross

soc: qcom: smem: small change in global entry loop

2018-09-13T21:57:08+00:00

Change the logic in the loop that finds that global host entry in the partition table not require the host0 and host1 local variables. The next patch will remove them. Signed-off-by: Alex Elder Signed-off-by: Andy Gross

soc: qcom: smem: verify partition offset_free_uncached

2018-09-13T21:57:06+00:00

Add verification in qcom_smem_partition_header() that the offset_free_uncached field in a partition's header structure does not exceed the partition's size. Signed-off-by: Alex Elder Signed-off-by: Andy Gross