kernel/linux.git/drivers/soc/fsl, branch v5.4.50

soc: fsl: dpio: register dpio irq handlers after dpio create

2020-04-17T08:49:57+00:00

[ Upstream commit fe8fe7723a3a824790bda681b40efd767e2251a7 ] The dpio irqs must be registered when you can actually receive interrupts, ie when the dpios are created. Kernel goes through NULL pointer dereference errors followed by kernel panic [1] because the dpio irqs are enabled before the dpio is created. [1] Unable to handle kernel NULL pointer dereference at virtual address 0040 fsl_mc_dpio dpio.14: probed fsl_mc_dpio dpio.13: Adding to iommu group 11 ISV = 0, ISS = 0x00000004 Unable to handle kernel NULL pointer dereference at virtual address 0040 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 151 Comm: kworker/2:1 Not tainted 5.6.0-rc4-next-20200304 #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Workqueue: events deferred_probe_work_func pstate: 00000085 (nzcv daIf -PAN -UAO) pc : dpaa2_io_irq+0x18/0xe0 lr : dpio_irq_handler+0x1c/0x28 sp : ffff800010013e20 x29: ffff800010013e20 x28: ffff0026d9b4c140 x27: ffffa1d38a142018 x26: ffff0026d2953400 x25: ffffa1d38a142018 x24: ffffa1d38a7ba1d8 x23: ffff800010013f24 x22: 0000000000000000 x21: 0000000000000072 x20: ffff0026d2953400 x19: ffff0026d2a68b80 x18: 0000000000000001 x17: 000000002fb37f3d x16: 0000000035eafadd x15: ffff0026d9b4c5b8 x14: ffffffffffffffff x13: ff00000000000000 x12: 0000000000000038 x11: 0101010101010101 x10: 0000000000000040 x9 : ffffa1d388db11e4 x8 : ffffa1d38a7e40f0 x7 : ffff0026da414f38 x6 : 0000000000000000 x5 : ffff0026da414d80 x4 : ffff5e5353d0c000 x3 : ffff800010013f60 x2 : ffffa1d388db11c8 x1 : ffff0026d2a67c00 x0 : 0000000000000000 Call trace: dpaa2_io_irq+0x18/0xe0 dpio_irq_handler+0x1c/0x28 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x38/0x90 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x2c/0x40 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x64/0x150 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x48 irq_set_affinity_hint+0x6c/0xa0 dpaa2_dpio_probe+0x2a4/0x518 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 device_add+0x41c/0x758 fsl_mc_device_add+0x184/0x530 dprc_scan_objects+0x280/0x370 dprc_probe+0x124/0x3b0 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 deferred_probe_work_func+0x74/0xa8 process_one_work+0x1c8/0x470 worker_thread+0x1f8/0x428 kthread+0x124/0x128 ret_from_fork+0x10/0x18 Code: a9bc7bfd 910003fd a9025bf5 a90363f7 (f9402015) ---[ end trace 38298e1a29e7a570 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Mem abort info: ESR = 0x96000004 CM = 0, WnR = 0 EC = 0x25: DABT (current EL), IL = 32 bits [0000000000000040] user address but active_mm is swapper SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper SMP: failed to stop secondary CPUs 0-2 Kernel Offset: 0x21d378600000 from 0xffff800010000000 PHYS_OFFSET: 0xffffe92180000000 CPU features: 0x10002,21806008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Signed-off-by: Laurentiu Tudor Signed-off-by: Grigore Popescu Signed-off-by: Li Yang Signed-off-by: Sasha Levin

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-09-16T22:52:38+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...

soc: fsl: dpio: remove explicit device_link_remove

2019-08-15T23:20:20+00:00

Starting with commit 72175d4ea4c4 ("driver core: Make driver core own stateful device links") stateful device links are owned by the driver core and should not be explicitly removed on device unbind. Delete all device_link_remove appearances from the dpio driver. Signed-off-by: Ioana Ciornei Signed-off-by: Li Yang

soc: fsl: guts: Add definition for LS1028A

2019-08-15T21:43:59+00:00

Adding compatible string "ls1028a-dcfg" to initialize guts driver for ls1028 and SoC die attribute definition for LS1028A Signed-off-by: Yinbo Zhu Signed-off-by: Li Yang

soc/fsl/qbman: Update device tree with reserved memory

2019-08-15T21:42:00+00:00

When using the reserved memory node in the device tree there are two options - dynamic or static. If a dynamic allocation was selected (where the kernel selects the address for the allocation) convert it to a static allocation by inserting the reg property. This will ensure the same memory is reused after a kexec() Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Fixup qman_shutdown_fq()

2019-08-15T21:41:56+00:00

When shutting down a FQ on a dedicated channel only the SW portal associated with that channel can dequeue from it. Make sure the correct portal is use. Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Disable interrupts during portal recovery

2019-08-15T21:41:53+00:00

Disable the QBMan interrupts during recovery. Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Fix drain_mr_fqni()

2019-08-15T21:41:49+00:00

The drain_mr_fqni() function may be called fron uninterruptable context so convert the msleep() to an mdelay(). Also ensure that the valid bit is updated while polling. Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Cleanup QMan queues if device was already initialized

2019-08-15T21:41:47+00:00

If the QMan device was previously initialized make sure all the frame queues are out of service once all the portals are probed. This handles the case where the kernel is restarted without the SoC being reset (kexec for example) Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup

2019-08-15T21:41:42+00:00

Clean the BMan buffer pools if the device had been initialized previously. This will ensure a consistent state if the kernel was soft restarted (kexec for example) Signed-off-by: Roy Pledge Signed-off-by: Li Yang