kernel/linux.git/drivers/soc/fsl, branch v5.4.113

soc/fsl: qbman: fix conflicting alignment attributes

2021-04-14T06:24:16+00:00

[ Upstream commit 040f31196e8b2609613f399793b9225271b79471 ] When building with W=1, gcc points out that the __packed attribute on struct qm_eqcr_entry conflicts with the 8-byte alignment attribute on struct qm_fd inside it: drivers/soc/fsl/qbman/qman.c:189:1: error: alignment 1 of 'struct qm_eqcr_entry' is less than 8 [-Werror=packed-not-aligned] I assume that the alignment attribute is the correct one, and that qm_eqcr_entry cannot actually be unaligned in memory, so add the same alignment on the outer struct. Fixes: c535e923bb97 ("soc/fsl: Introduce DPAA 1.x QMan device driver") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20210323131530.2619900-1-arnd@kernel.org' Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin

soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)

2020-12-16T09:56:56+00:00

[ Upstream commit 2663b3388551230cbc4606a40fabf3331ceb59e4 ] The local variable 'cpumask_t mask' is in the stack memory, and its address is assigned to 'desc->affinity' in 'irq_set_affinity_hint()'. But the memory area where this variable is located is at risk of being modified. During LTP testing, the following error was generated: Unable to handle kernel paging request at virtual address ffff000012e9b790 Mem abort info: ESR = 0x96000007 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000007 CM = 0, WnR = 0 swapper pgtable: 4k pages, 48-bit VAs, pgdp = 0000000075ac5e07 [ffff000012e9b790] pgd=00000027dbffe003, pud=00000027dbffd003, pmd=00000027b6d61003, pte=0000000000000000 Internal error: Oops: 96000007 [#1] PREEMPT SMP Modules linked in: xt_conntrack Process read_all (pid: 20171, stack limit = 0x0000000044ea4095) CPU: 14 PID: 20171 Comm: read_all Tainted: G B W Hardware name: NXP Layerscape LX2160ARDB (DT) pstate: 80000085 (Nzcv daIf -PAN -UAO) pc : irq_affinity_hint_proc_show+0x54/0xb0 lr : irq_affinity_hint_proc_show+0x4c/0xb0 sp : ffff00001138bc10 x29: ffff00001138bc10 x28: 0000ffffd131d1e0 x27: 00000000007000c0 x26: ffff8025b9480dc0 x25: ffff8025b9480da8 x24: 00000000000003ff x23: ffff8027334f8300 x22: ffff80272e97d000 x21: ffff80272e97d0b0 x20: ffff8025b9480d80 x19: ffff000009a49000 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000040 x11: 0000000000000000 x10: ffff802735b79b88 x9 : 0000000000000000 x8 : 0000000000000000 x7 : ffff000009a49848 x6 : 0000000000000003 x5 : 0000000000000000 x4 : ffff000008157d6c x3 : ffff00001138bc10 x2 : ffff000012e9b790 x1 : 0000000000000000 x0 : 0000000000000000 Call trace: irq_affinity_hint_proc_show+0x54/0xb0 seq_read+0x1b0/0x440 proc_reg_read+0x80/0xd8 __vfs_read+0x60/0x178 vfs_read+0x94/0x150 ksys_read+0x74/0xf0 __arm64_sys_read+0x24/0x30 el0_svc_common.constprop.0+0xd8/0x1a0 el0_svc_handler+0x34/0x88 el0_svc+0x10/0x14 Code: f9001bbf 943e0732 f94066c2 b4000062 (f9400041) ---[ end trace b495bdcb0b3b732b ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs SMP: failed to stop secondary CPUs 0,2-4,6,8,11,13-15 Kernel Offset: disabled CPU features: 0x0,21006008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception ]--- Fix it by using 'cpumask_of(cpu)' to get the cpumask. Signed-off-by: Hao Si Signed-off-by: Lin Chen Signed-off-by: Yi Wang Signed-off-by: Li Yang Signed-off-by: Sasha Levin

soc: fsl: qbman: Fix return value on success

2020-10-29T08:57:59+00:00

[ Upstream commit 750cf40c0f7088f36a8a5d102e0488b1ac47faf5 ] On error the function was meant to return -ERRNO. This also fixes compile warning: drivers/soc/fsl/qbman/bman.c:640:6: warning: variable 'err' set but not used [-Wunused-but-set-variable] Fixes: 0505d00c8dba ("soc/fsl/qbman: Cleanup buffer pools if BMan was initialized prior to bootup") Signed-off-by: Krzysztof Kozlowski Signed-off-by: Li Yang Signed-off-by: Sasha Levin

soc: fsl: dpio: register dpio irq handlers after dpio create

2020-04-17T08:49:57+00:00

[ Upstream commit fe8fe7723a3a824790bda681b40efd767e2251a7 ] The dpio irqs must be registered when you can actually receive interrupts, ie when the dpios are created. Kernel goes through NULL pointer dereference errors followed by kernel panic [1] because the dpio irqs are enabled before the dpio is created. [1] Unable to handle kernel NULL pointer dereference at virtual address 0040 fsl_mc_dpio dpio.14: probed fsl_mc_dpio dpio.13: Adding to iommu group 11 ISV = 0, ISS = 0x00000004 Unable to handle kernel NULL pointer dereference at virtual address 0040 Mem abort info: ESR = 0x96000004 EC = 0x25: DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 2 PID: 151 Comm: kworker/2:1 Not tainted 5.6.0-rc4-next-20200304 #1 Hardware name: NXP Layerscape LX2160ARDB (DT) Workqueue: events deferred_probe_work_func pstate: 00000085 (nzcv daIf -PAN -UAO) pc : dpaa2_io_irq+0x18/0xe0 lr : dpio_irq_handler+0x1c/0x28 sp : ffff800010013e20 x29: ffff800010013e20 x28: ffff0026d9b4c140 x27: ffffa1d38a142018 x26: ffff0026d2953400 x25: ffffa1d38a142018 x24: ffffa1d38a7ba1d8 x23: ffff800010013f24 x22: 0000000000000000 x21: 0000000000000072 x20: ffff0026d2953400 x19: ffff0026d2a68b80 x18: 0000000000000001 x17: 000000002fb37f3d x16: 0000000035eafadd x15: ffff0026d9b4c5b8 x14: ffffffffffffffff x13: ff00000000000000 x12: 0000000000000038 x11: 0101010101010101 x10: 0000000000000040 x9 : ffffa1d388db11e4 x8 : ffffa1d38a7e40f0 x7 : ffff0026da414f38 x6 : 0000000000000000 x5 : ffff0026da414d80 x4 : ffff5e5353d0c000 x3 : ffff800010013f60 x2 : ffffa1d388db11c8 x1 : ffff0026d2a67c00 x0 : 0000000000000000 Call trace: dpaa2_io_irq+0x18/0xe0 dpio_irq_handler+0x1c/0x28 __handle_irq_event_percpu+0x78/0x2c0 handle_irq_event_percpu+0x38/0x90 handle_irq_event+0x4c/0xd0 handle_fasteoi_irq+0xbc/0x168 generic_handle_irq+0x2c/0x40 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x64/0x150 el1_irq+0xb8/0x180 _raw_spin_unlock_irqrestore+0x14/0x48 irq_set_affinity_hint+0x6c/0xa0 dpaa2_dpio_probe+0x2a4/0x518 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 device_add+0x41c/0x758 fsl_mc_device_add+0x184/0x530 dprc_scan_objects+0x280/0x370 dprc_probe+0x124/0x3b0 fsl_mc_driver_probe+0x28/0x70 really_probe+0xdc/0x320 driver_probe_device+0x5c/0xf0 __device_attach_driver+0x88/0xc0 bus_for_each_drv+0x7c/0xc8 __device_attach+0xe4/0x140 device_initial_probe+0x18/0x20 bus_probe_device+0x98/0xa0 deferred_probe_work_func+0x74/0xa8 process_one_work+0x1c8/0x470 worker_thread+0x1f8/0x428 kthread+0x124/0x128 ret_from_fork+0x10/0x18 Code: a9bc7bfd 910003fd a9025bf5 a90363f7 (f9402015) ---[ end trace 38298e1a29e7a570 ]--- Kernel panic - not syncing: Fatal exception in interrupt SMP: stopping secondary CPUs Mem abort info: ESR = 0x96000004 CM = 0, WnR = 0 EC = 0x25: DABT (current EL), IL = 32 bits [0000000000000040] user address but active_mm is swapper SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000040] user address but active_mm is swapper SMP: failed to stop secondary CPUs 0-2 Kernel Offset: 0x21d378600000 from 0xffff800010000000 PHYS_OFFSET: 0xffffe92180000000 CPU features: 0x10002,21806008 Memory Limit: none ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]--- Signed-off-by: Laurentiu Tudor Signed-off-by: Grigore Popescu Signed-off-by: Li Yang Signed-off-by: Sasha Levin

Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2019-09-16T22:52:38+00:00

Pull ARM SoC driver updates from Arnd Bergmann: "This contains driver changes that are tightly connected to SoC specific code. Aside from smaller cleanups and bug fixes, here is a list of the notable changes. New device drivers: - The Turris Mox router has a new "moxtet" bus driver for its on-board pluggable extension bus. The same platform also gains a firmware driver. - The Samsung Exynos family gains a new Chipid driver exporting using the soc device sysfs interface - A similar socinfo driver for Qualcomm Snapdragon chips. - A firmware driver for the NXP i.MX DSP IPC protocol using shared memory and a mailbox Other changes: - The i.MX reset controller driver now supports the NXP i.MX8MM chip - Amlogic SoC specific drivers gain support for the S905X3 and A311D chips - A rework of the TI Davinci framebuffer driver to allow important cleanups in the platform code - A couple of device drivers for removed ARM SoC platforms are removed. Most of the removals were picked up by other maintainers, this contains whatever was left" * tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits) bus: uniphier-system-bus: use devm_platform_ioremap_resource() soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access firmware: ti_sci: Allow for device shared and exclusive requests bus: imx-weim: remove incorrect __init annotations fbdev: remove w90x900/nuc900 platform drivers spi: remove w90x900 driver net: remove w90p910-ether driver net: remove ks8695 driver firmware: turris-mox-rwtm: Add sysfs documentation firmware: Add Turris Mox rWTM firmware driver dt-bindings: firmware: Document cznic,turris-mox-rwtm binding bus: moxtet: fix unsigned comparison to less than zero bus: moxtet: remove set but not used variable 'dummy' ARM: scoop: Use the right include dt-bindings: power: add Amlogic Everything-Else power domains bindings soc: amlogic: Add support for Everything-Else power domains controller fbdev: da8xx: use resource management for dma fbdev: da8xx-fb: drop a redundant if fbdev: da8xx-fb: use devm_platform_ioremap_resource() ...

soc: fsl: dpio: remove explicit device_link_remove

2019-08-15T23:20:20+00:00

Starting with commit 72175d4ea4c4 ("driver core: Make driver core own stateful device links") stateful device links are owned by the driver core and should not be explicitly removed on device unbind. Delete all device_link_remove appearances from the dpio driver. Signed-off-by: Ioana Ciornei Signed-off-by: Li Yang

soc: fsl: guts: Add definition for LS1028A

2019-08-15T21:43:59+00:00

Adding compatible string "ls1028a-dcfg" to initialize guts driver for ls1028 and SoC die attribute definition for LS1028A Signed-off-by: Yinbo Zhu Signed-off-by: Li Yang

soc/fsl/qbman: Update device tree with reserved memory

2019-08-15T21:42:00+00:00

When using the reserved memory node in the device tree there are two options - dynamic or static. If a dynamic allocation was selected (where the kernel selects the address for the allocation) convert it to a static allocation by inserting the reg property. This will ensure the same memory is reused after a kexec() Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Fixup qman_shutdown_fq()

2019-08-15T21:41:56+00:00

When shutting down a FQ on a dedicated channel only the SW portal associated with that channel can dequeue from it. Make sure the correct portal is use. Signed-off-by: Roy Pledge Signed-off-by: Li Yang

soc/fsl/qbman: Disable interrupts during portal recovery

2019-08-15T21:41:53+00:00

Disable the QBMan interrupts during recovery. Signed-off-by: Roy Pledge Signed-off-by: Li Yang