kernel/linux.git/drivers/soc/fsl, branch v4.19.77

soc: fsl: qbman: avoid race in clearing QMan interrupt

2019-03-13T21:02:33+00:00

[ Upstream commit 89857a8a5c89a406b967ab2be7bd2ccdbe75e73d ] By clearing all interrupt sources, not only those that already occurred, the existing code may acknowledge by mistake interrupts that occurred after the code checks for them. Signed-off-by: Madalin Bucur Signed-off-by: Roy Pledge Signed-off-by: Li Yang Signed-off-by: Sasha Levin

soc: fsl: qman_portals: defer probe after qman's probe

2018-10-01T22:47:43+00:00

Defer probe of qman portals after qman probing. This fixes the crash below, seen on NXP LS1043A SoCs: Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004 Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 [0000000000000004] user address but active_mm is swapper Internal error: Oops: 96000004 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.18.0-rc1-next-20180622-00200-g986f5c179185 #9 Hardware name: LS1043A RDB Board (DT) pstate: 80000005 (Nzcv daif -PAN -UAO) pc : qman_set_sdest+0x74/0xa0 lr : qman_portal_probe+0x22c/0x470 sp : ffff00000803bbc0 x29: ffff00000803bbc0 x28: 0000000000000000 x27: ffff0000090c1b88 x26: ffff00000927cb68 x25: ffff00000927c000 x24: ffff00000927cb60 x23: 0000000000000000 x22: 0000000000000000 x21: ffff0000090e9000 x20: ffff800073b5c810 x19: ffff800027401298 x18: ffffffffffffffff x17: 0000000000000001 x16: 0000000000000000 x15: ffff0000090e96c8 x14: ffff80002740138a x13: ffff0000090f2000 x12: 0000000000000030 x11: ffff000008f25000 x10: 0000000000000000 x9 : ffff80007bdfd2c0 x8 : 0000000000004000 x7 : ffff80007393cc18 x6 : 0040000000000001 x5 : 0000000000000000 x4 : ffffffffffffffff x3 : 0000000000000004 x2 : ffff00000927c900 x1 : 0000000000000000 x0 : 0000000000000004 Process swapper/0 (pid: 1, stack limit = 0x(____ptrval____)) Call trace: qman_set_sdest+0x74/0xa0 platform_drv_probe+0x50/0xa8 driver_probe_device+0x214/0x2f8 __driver_attach+0xd8/0xe0 bus_for_each_dev+0x68/0xc8 driver_attach+0x20/0x28 bus_add_driver+0x108/0x228 driver_register+0x60/0x110 __platform_driver_register+0x40/0x48 qman_portal_driver_init+0x20/0x84 do_one_initcall+0x58/0x168 kernel_init_freeable+0x184/0x22c kernel_init+0x10/0x108 ret_from_fork+0x10/0x18 Code: f9400443 11001000 927e4800 8b000063 (b9400063) ---[ end trace 4f6d50489ecfb930 ]--- Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang

soc: fsl: qbman: add APIs to retrieve the probing status

2018-09-27T20:43:35+00:00

Add a couple of new APIs to check the probing status of qman and bman: 'int bman_is_probed()' and 'int qman_is_probed()'. They return the following values. * 1 if qman/bman were probed correctly * 0 if qman/bman were not yet probed * -1 if probing of qman/bman failed Drivers that use qman/bman driver services are required to use these APIs before calling any functions exported by qman or bman drivers or otherwise they will crash the kernel. The APIs will be used in the following couple of qbman portal patches and later in the series in the dpaa1 ethernet driver. Signed-off-by: Laurentiu Tudor Signed-off-by: Li Yang

soc: fsl: qe: Fix copy/paste bug in ucc_get_tdm_sync_shift()

2018-09-25T20:57:26+00:00

There is a copy and paste bug so we accidentally use the RX_ shift when we're in TX_ mode. Fixes: bb8b2062aff3 ("fsl/qe: setup clock source for TDM mode") Signed-off-by: Dan Carpenter Signed-off-by: Zhao Qiang Signed-off-by: Li Yang (cherry picked from commit 3cb31b634052ed458922e0c8e2b4b093d7fb60b9) Signed-off-by: Olof Johansson

soc: fsl: qbman: qman: avoid allocating from non existing gen_pool

2018-09-25T20:57:25+00:00

If the qman driver didn't probe, calling qman_alloc_fqid_range, qman_alloc_pool_range or qman_alloc_cgrid_range (as done in dpaa_eth) will pass a NULL pointer to gen_pool_alloc, leading to a NULL pointer dereference. Signed-off-by: Alexandre Belloni Reviewed-by: Roy Pledge Signed-off-by: Li Yang (cherry picked from commit f72487a2788aa70c3aee1d0ebd5470de9bac953a) Signed-off-by: Olof Johansson

soc: fsl: cleanup Kconfig menu

2018-07-24T21:19:16+00:00

Put NXP/Freescale QorIQ SoC drivers under a menu and make the item naming more aligned. Signed-off-by: Li Yang

soc: fsl: dpio: Convert DPIO documentation to .rst

2018-07-24T21:18:56+00:00

Convert the Datapath I/O documentation to .rst format and move to the Documation/networking/dpaa2 directory Signed-off-by: Roy Pledge Reviewed-by: Horia Geantă Reviewed-by: Ioana Radulescu Signed-off-by: Li Yang

staging: fsl-mc: Move DPIO from staging to drivers/soc/fsl

2018-07-24T21:18:55+00:00

Move the NXP DPIO (Datapath I/O Driver) out of the drivers/staging directory and into the drivers/soc/fsl directory. The DPIO driver enables access to Queue and Buffer Manager (QBMAN) hardware on NXP DPAA2 devices. This is a prerequisite to moving the DPAA2 Ethernet driver out of staging. Signed-off-by: Roy Pledge Reviewed-by: Horia Geantă Reviewed-by: Ioana Radulescu Signed-off-by: Li Yang

soc: fsl: qe: gpio: Add qe_gpio_set_multiple

2018-07-24T21:18:22+00:00

This cousin to gpio-mpc8xxx was lacking a multiple pins method, add one. Signed-off-by: Joakim Tjernlund Reviewed-by: Qiang Zhao Signed-off-by: Li Yang

treewide: Use array_size() in vzalloc()

2018-06-12T23:19:22+00:00

The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook