kernel/linux.git/drivers/soc/aspeed, branch v5.15.7

soc: aspeed-lpc-ctrl: Fix clock cleanup in error path

2021-08-26T09:31:22+00:00

Move syscon_regmap_lookup_by_compatible() above the devm_clk_get() to avoid missing clk_disable_unprepare(). Fixes: 2f9b25fa6682 ("soc: aspeed: Re-enable FWH2AHB on AST2600") Reported-by: Hulk Robot Signed-off-by: Yang Yingliang Signed-off-by: Joel Stanley Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20210824085522.1849410-1-yangyingliang@huawei.com Link: https://lore.kernel.org/r/20210825001214.3056193-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann

soc: aspeed: Re-enable FWH2AHB on AST2600

2021-08-19T04:29:28+00:00

Recent builds of the vendor u-boot tree disable features of the BMC that may allow unwanted access if not correctly configured. This includes the firmware hub to ahb bridge (FWH2AHB), which is used by this driver. The bit to "un-disable" it is in the SCU. Set it only when the ioctl is called and we are running on the ast2600, as to not open up the 'backdoor' unless there's userspace trying to use it. Fixes: deb50313ba83 ("soc: aspeed-lpc-ctrl: LPC to AHB mapping on ast2600") Link: https://lore.kernel.org/r/20210629073520.318514-2-joel@jms.id.au Signed-off-by: Joel Stanley

soc: aspeed: socinfo: Add AST2625 variant

2021-08-19T04:21:29+00:00

Add AST26XX series AST2625-A3 SOC ID, taken from the vendor u-boot SDK: arch/arm/mach-aspeed/ast2600/scu_info.c + SOC_ID("AST2625-A3", 0x0503040305030403), Reviewed-by: Dylan Hung Link: https://lore.kernel.org/r/20210818010534.2508122-1-joel@jms.id.au Signed-off-by: Joel Stanley

soc: aspeed: p2a-ctrl: Fix boundary check for mmap

2021-08-17T08:30:44+00:00

The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one side of the comparison, and uses resource address (rather than just the resource size) on the other side of the comparison. This can allow malicious userspace to easily bypass the boundary check and map pages that are located outside memory-region reserved by the driver. Fixes: 01c60dcea9f7 ("drivers/misc: Add Aspeed P2A control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska Reviewed-by: Andrew Jeffery Tested-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley

soc: aspeed: lpc-ctrl: Fix boundary check for mmap

2021-08-17T08:28:42+00:00

The check mixes pages (vm_pgoff) with bytes (vm_start, vm_end) on one side of the comparison, and uses resource address (rather than just the resource size) on the other side of the comparison. This can allow malicious userspace to easily bypass the boundary check and map pages that are located outside memory-region reserved by the driver. Fixes: 6c4e97678501 ("drivers/misc: Add Aspeed LPC control driver") Cc: stable@vger.kernel.org Signed-off-by: Iwona Winiarska Reviewed-by: Andrew Jeffery Tested-by: Andrew Jeffery Reviewed-by: Joel Stanley Signed-off-by: Joel Stanley

soc: aspeed: fix a ternary sign expansion bug

2021-04-23T09:16:47+00:00

The intent here was to return negative error codes but it actually returns positive values. The problem is that type promotion with ternary operations is quite complicated. "ret" is an int. "copied" is a u32. And the snoop_file_read() function returns long. What happens is that "ret" is cast to u32 and becomes positive then it's cast to long and it's still positive. Fix this by removing the ternary so that "ret" is type promoted directly to long. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Dan Carpenter Signed-off-by: Joel Stanley Reviewed-by: Patrick Venture Link: https://lore.kernel.org/r/YIE90PSXsMTa2Y8n@mwanda Link: https://lore.kernel.org/r/20210423000919.1249474-1-joel@jms.id.au' Signed-off-by: Arnd Bergmann

soc: aspeed: Adapt to new LPC device tree layout

2021-04-09T04:09:22+00:00

Add check against LPC device v2 compatible string to ensure that the fixed device tree layout is adopted. The LPC register offsets are also fixed accordingly. Signed-off-by: Chia-Wei Wang Reviewed-by: Andrew Jeffery Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20210319062752.145730-5-andrew@aj.id.au Signed-off-by: Joel Stanley

soc: aspeed: socinfo: Add new systems

2021-02-10T11:55:45+00:00

Aspeed's u-boot sdk has been updated with the SoC IDs for the AST2605 variant, as well as A2 and A3 variants of the 2600 family. >From u-boot's arch/arm/mach-aspeed/ast2600/scu_info.c: SOC_ID("AST2600-A0", 0x0500030305000303), SOC_ID("AST2600-A1", 0x0501030305010303), SOC_ID("AST2620-A1", 0x0501020305010203), SOC_ID("AST2600-A2", 0x0502030305010303), SOC_ID("AST2620-A2", 0x0502020305010203), SOC_ID("AST2605-A2", 0x0502010305010103), SOC_ID("AST2600-A3", 0x0503030305030303), SOC_ID("AST2620-A3", 0x0503020305030203), SOC_ID("AST2605-A3", 0x0503010305030103), Fixes: e0218dca5787 ("soc: aspeed: Add soc info driver") Link: https://lore.kernel.org/r/20210210114651.334324-1-joel@jms.id.au Signed-off-by: Joel Stanley

soc: aspeed: snoop: Add clock control logic

2021-02-10T09:59:31+00:00

If LPC SNOOP driver is registered ahead of lpc-ctrl module, LPC SNOOP block will be enabled without heart beating of LCLK until lpc-ctrl enables the LCLK. This issue causes improper handling on host interrupts when the host sends interrupt in that time frame. Then kernel eventually forcibly disables the interrupt with dumping stack and printing a 'nobody cared this irq' message out. To prevent this issue, all LPC sub-nodes should enable LCLK individually so this patch adds clock control logic into the LPC SNOOP driver. Fixes: 3772e5da4454 ("drivers/misc: Aspeed LPC snoop output using misc chardev") Signed-off-by: Jae Hyun Yoo Signed-off-by: Vernon Mauery Signed-off-by: John Wang Reviewed-by: Joel Stanley Link: https://lore.kernel.org/r/20201208091748.1920-1-wangzhiqiang.bj@bytedance.com Signed-off-by: Joel Stanley

soc: aspeed: Enable drivers with ARCH_ASPEED

2020-11-19T12:31:36+00:00

Default the drivers to on as most configurations will use them. Signed-off-by: Joel Stanley