kernel/linux.git/drivers/serial/cpm_uart, branch linux-2.6.18.y

Remove obsolete #include

2006-06-30T17:25:36+00:00

Signed-off-by: Jörn Engel Signed-off-by: Adrian Bunk

[PATCH] ppc32 CPM_UART: various fixes for pq2 uart users

2006-05-26T12:38:56+00:00

This fixes various odd things that missed update together with cpm_uart platform_device move. Unified resources names, restructurisation, etc. Also, addressed issue with recent phys/virt translation rework. Being cache-coherent, CPM2's do alloc_bootmem() for the console stuff, and it was used to treat console buffer descriptor mapping 1:1 (as in CPM1 case), which is definitely wrong. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras

[PATCH] ppc32 CPM_UART: fixes and improvements

2006-05-03T13:06:44+00:00

A number of small issues are fixed, and added the header file, missed from the original series. With this, driver should be pretty stable as tested among both platform-device-driven and "old way" boards. Also added missing GPL statement , and updated year field on existing ones to reflect code update. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras

[PATCH] ppc32 CPM_UART: Fixed break send on SCC

2006-05-03T13:06:43+00:00

SCC uart sends a break sequence each time it is stopped with the CPM_CR_STOP_TX command. That means that each time an application closes the serial device, a break is transmitted. To fix this, graceful tx stop is issued for SCC. Signed-off-by: David Jander Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras

[PATCH] ppc32 CPM_UART: Fixed odd address translations

2006-04-28T11:11:33+00:00

Current address translation methods can produce wrong results, because virt_to_bus and vice versa may not produce correct offsets on dma-allocated memory. The right way is, while tracking both phys and virt address of the window that has been allocated for boffer descriptors, and use those numbers to compute the offset and make translation properly. Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras

[PATCH] ppc32 CPM_UART: Convert to use platform devices

2006-04-28T11:11:28+00:00

This is intended to make the driver code more generic and flexible, to get rid of board-specific layouts within driver, and generic rehaul, yet keeping compatibility with the existing stuff utilizing it, being compatible with legacy behavior (but with complaints that legacy mode used). Signed-off-by: Vitaly Bordug Signed-off-by: Paul Mackerras

[SERIAL] PPC32 CPM_UART: update to utilize the new TTY flip API

2006-02-08T21:40:13+00:00

This replaces old direct usage of tty->flip stuff with relative flip API calls. Signed-off-by: Vitaly Bordug Signed-off-by: Russell King

[SERIAL] uart_port iotype member should use UPIO_*

2006-02-05T10:48:10+00:00

Convert usage of SERIAL_IO_* to UPIO_*. Signed-off-by: Russell King

[PATCH] ppc32: cpm_uart: fix xchar sending

2006-01-09T04:44:26+00:00

while using SCC as uart and as serial console at same time I got this: [ 138.214258] Oops: kernel access of bad area, sig: 11 [#1] [ 138.218832] PREEMPT [ 138.221021] NIP: C0105C48 LR: C0105E60 SP: C03D5D10 REGS: c03d5c60 TRAP: 0300 Not tainted [ 138.229280] MSR: 00009032 EE: 1 PR: 0 FP: 0 ME: 1 IR/DR: 11 [ 138.234713] DAR: 00000000, DSISR: C0000000 [ 138.238745] TASK = c0349420[693] 'sh' THREAD: c03d4000 [ 138.243754] Last syscall: 6 [ 138.246402] GPR00: FEFFFFFF C03D5D10 C0349420 C01FB094 00000011 00000000 C1ECFBBC C01F24B0 [ 138.254602] GPR08: FF002820 00000000 FF0028C0 00000000 19133615 A0CBCD5E 02000300 00000000 [ 138.262804] GPR16: 00000000 01FF9E4C 00000000 7FA9A770 00000000 00000000 1003E2A8 00000000 [ 138.271003] GPR24: 100562F4 7F9B6EF4 C0210000 C02A5338 C01FB094 00000000 C01FB094 C1F14574 [ 138.279376] NIP [c0105c48] cpm_uart_tx_pump+0x4c/0x22c [ 138.284419] LR [c0105e60] cpm_uart_start_tx+0x38/0xb0 [ 138.289361] Call trace: [ 138.291762] [c0105e60] cpm_uart_start_tx+0x38/0xb0 [ 138.296547] [c010277c] uart_send_xchar+0x88/0x118 [ 138.301244] [c01029a0] uart_unthrottle+0x6c/0x138 [ 138.305942] [c00ece10] check_unthrottle+0x60/0x64 [ 138.310641] [c00ecec4] reset_buffer_flags+0xb0/0x138 [ 138.315595] [c00ecf64] n_tty_flush_buffer+0x18/0x78 [ 138.320465] [c00e81b0] tty_ldisc_flush+0x64/0x7c [ 138.325078] [c010410c] uart_close+0xf0/0x2c8 [ 138.329348] [c00e9c48] release_dev+0x724/0x8d4 [ 138.333790] [c00e9e18] tty_release+0x20/0x3c [ 138.338061] [c006e544] __fput+0x178/0x1e0 [ 138.342076] [c006c43c] filp_close+0x54/0xac [ 138.346261] [c0002d90] ret_from_syscall+0x0/0x44 [ 138.352386] note: sh[693] exited with preempt_count 2 a easy way to reproduce it is log into the system using ssh and do: cat >/dev/ttyCPM0 then, switch to minicom and write some stuff on it back to ssh, a control C produce the oops this happens because uart_close calls uart_shutdown which frees xmit.buf, currently used by xchar sending in cpm_uart_tx_pump(), which seems wrong. the attached patch fixes the oops and also fixes xchar sending. Signed-off-by: Paul Mackerras

[PATCH] Update email address for Kumar

2005-11-14T02:14:10+00:00

Changed jobs and the Freescale address is no longer valid. Signed-off-by: Kumar Gala Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds