kernel/linux.git/drivers/scsi, branch v7.0.12

scsi: scsi_transport_fc: Widen FPIN pname walker counter to u32

2026-06-09T10:32:45+00:00

commit a9a39233ec1fc9f97ea1340a4d09bb7ec2be5153 upstream. An adjacent Fibre Channel fabric actor that can deliver an FPIN ELS frame to an lpfc or qla2xxx Linux initiator can trigger a non-return in the generic FC transport. This is not a local userspace or IP network path; the attacker must be able to inject fabric traffic, for example as a compromised switch or fabric controller, or as a same-zone N_Port on a fabric that permits source spoofing. The Link-Integrity and Peer-Congestion FPIN walkers used a u8 loop counter against the 32-bit on-wire pname_count field, and did not bound pname_count by the descriptor body already validated by the TLV walker. A pname_count of 256 therefore wraps the counter and keeps the loop condition true indefinitely. Factor the shared pname_list[] walk into one helper, widen the counter to u32, and clamp pname_count against the entries that fit in the descriptor body before iterating. Fixes: 3dcfe0de5a97 ("scsi: fc: Parse FPIN packets and update statistics") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Reviewed-by: Christoph Hellwig Reviewed-by: John Garry Link: https://patch.msgid.link/20260520133015.1018937-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: fcoe: Reject FIP descriptors with zero fip_dlen in CVL walker

2026-06-09T10:32:45+00:00

commit 9eed1bd59937e6828b00d2f2dfef631d964f3636 upstream. drivers/scsi/fcoe/fcoe_ctlr.c::fcoe_ctlr_recv_clr_vlink() advanced the descriptor cursor by an attacker-supplied fip_dlen without ever requiring dlen >= sizeof(struct fip_desc) in the default branch. The named descriptor cases (FIP_DT_MAC, FIP_DT_NAME, FIP_DT_VN_ID) checked their per-type minimum lengths, but a FIP_DT_NON_CRITICAL descriptor (fip_dtype >= 128, which the standard requires receivers to silently ignore) skipped that check entirely. An unauthenticated L2 peer on the FCoE control VLAN could hang fcoe_ctlr_recv_work on an fcoe, qedf, or bnx2fc initiator indefinitely by emitting one FIP CVL frame whose single descriptor had fip_dtype == FIP_DT_NON_CRITICAL and fip_dlen == 0: the cursor advanced zero bytes per iteration and the loop condition rlen >= sizeof(*desc) stayed true forever, blocking every subsequent FIP frame on that controller. Tighten the outer dlen guard to also reject dlen < sizeof(struct fip_desc), so a malformed descriptor whose length cannot even cover the descriptor header is rejected before the switch. This is the same lower-bound the named cases already apply and is the minimum scope that closes the loop. Fixes: 97c8389d54b9 ("[SCSI] fcoe, libfcoe: Add support for FIP. FCoE discovery and keep-alive.") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Signed-off-by: Michael Bommarito Reviewed-by: Hannes Reinecke Link: https://patch.msgid.link/20260518144307.2820961-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: scsi_debug: Add missing newline in scsi_debug_device_reset()

2026-06-09T10:32:22+00:00

[ Upstream commit e4bb73bf3ac11b4a93634660345b9d764a4a80df ] A "\n" at the end of the sdev_printk() string appears to have been inadvertently removed. Add it back for correct log message formatting. Fixes: a743b120227a ("scsi: scsi_debug: Stop printing extra function name in debug logs") Assisted-by: Claude:claude-opus-4-6 Signed-off-by: Ewan D. Milne Reviewed-by: Bart Van Assche Reviewed-by: John Garry Link: https://patch.msgid.link/20260519205356.1040855-1-emilne@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: core: Run queues for all non-SDEV_DEL devices from scsi_run_host_queues

2026-06-09T10:32:22+00:00

[ Upstream commit 7205b58702273baf21d6ba7992e6ba15852325f7 ] While a SCSI host is in a recovery state, scsi_mq_requeue_cmd() will not set the requeue list for a requeued command to be kicked in the future. The expectation is a call to scsi_run_host_queues() will kick all SCSI devices once the recovery state is cleared. However, scsi_run_host_queues() uses shost_for_each_device() which uses scsi_device_get() and so will ignore devices in a partially removed state like SDEV_CANCEL. But these devices may also have requeued requests, leaving their requests stuck from not being kicked and causing the removal process of the device to hang. scsi_run_host_queues() needs to run against more devices than the macro shost_for_each_device() allows. Instead of using the too limiting scsi_device_get() state checks, only ignore devices in SDEV_DEL state or when unable to acquire a reference. Attempt to run the queues for all other devices when scsi_run_host_queues() is called. Fixes: 8b566edbdbfb ("scsi: core: Only kick the requeue list if necessary") Signed-off-by: David Jeffery Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260515180941.9698-1-djeffery@redhat.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sd: Fix return code handling in sd_spinup_disk()

2026-06-01T15:54:44+00:00

[ Upstream commit 6ea68a8dc7d2711504d944811981a5304af7d7a9 ] As found by smatch-ci, scsi_execute_cmd() can return negative or positve values so we should use a int instead of unsigned int. Fixes: b4d0c33a32c3 ("scsi: sd: Fix sshdr use in sd_spinup_disk") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/linux-scsi/agFbI7E6JQwd3wGW@stanley.mountain/T/#u Signed-off-by: Mike Christie Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260511175317.114007-1-michael.christie@oracle.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: isci: Fix use-after-free in device removal path

2026-06-01T15:54:28+00:00

commit b52a8d52c3125ec9a93106ed816582368de34426 upstream. The ISCI completion tasklet is initialized in isci_host_alloc() (drivers/scsi/isci/init.c:496) and scheduled from both MSI-X and legacy interrupt handlers (drivers/scsi/isci/host.c:223,613). isci_host_deinit() stops the controller and waits for stop completion, but it never kills completion_tasklet before teardown continues. A top-of-function tasklet_kill() is not sufficient here: interrupts are only disabled when isci_host_stop_complete() runs, so until wait_for_stop() returns the IRQ handlers can still requeue the tasklet. The tasklet callback also re-enables interrupts after draining completions, so killing the tasklet before the source is quiesced leaves the same race open. Once wait_for_stop() returns, no further IRQ-driven scheduling can occur. Kill completion_tasklet there so teardown cannot race a queued tasklet running on a dead ihost. On remove or unload, the stale callback can otherwise dereference ihost and touch ihost->smu_registers after the host lifetime ends. A UML + KASAN analogue reproduced the failure class both with no tasklet_kill() and with tasklet_kill() placed before source quiesce, and stayed clean once the kill happened after quiescing the scheduling source. This mirrors commit f6ab594672d4 ("scsi: aic94xx: fix use-after-free in device removal path"), but ISCI needs the kill after wait_for_stop(). Fixes: 6f231dda6808 ("isci: Intel(R) C600 Series Chipset Storage Control Unit Driver") Cc: stable@vger.kernel.org Assisted-by: Claude:claude-opus-4-7 Assisted-by: Codex:gpt-5-4 Signed-off-by: Michael Bommarito Link: https://patch.msgid.link/20260419210420.2134639-1-michael.bommarito@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

cdrom, scsi: sr: propagate read-only status to block layer via set_disk_ro()

2026-05-23T11:09:28+00:00

[ Upstream commit 0898a817621a2f0cddca8122d9b974003fe5036d ] The cdrom core never calls set_disk_ro() for a registered device, so BLKROGET on a CD-ROM device always returns 0 (writable), even when the drive has no write capabilities and writes will inevitably fail. This causes problems for userspace that relies on BLKROGET to determine whether a block device is read-only. For example, systemd's loop device setup uses BLKROGET to decide whether to create a loop device with LO_FLAGS_READ_ONLY. Without the read-only flag, writes pass through the loop device to the CD-ROM and fail with I/O errors. systemd-fsck similarly checks BLKROGET to decide whether to run fsck in no-repair mode (-n). The write-capability bits in cdi->mask come from two different sources: CDC_DVD_RAM and CDC_CD_RW are populated by the driver from the MODE SENSE capabilities page (page 0x2A) before register_cdrom() is called, while CDC_MRW_W and CDC_RAM require the MMC GET CONFIGURATION command and were only probed by cdrom_open_write() at device open time. This meant that any attempt to compute the writable state from the full mask at probe time was incorrect, because the GET CONFIGURATION bits were still unset (and cdi->mask is initialized such that capabilities are assumed present). Fix this by factoring the GET CONFIGURATION probing out of cdrom_open_write() into a new exported helper, cdrom_probe_write_features(), and having sr call it from sr_probe() right after get_capabilities() has populated the MODE SENSE bits. register_cdrom() then calls set_disk_ro() based on the full write-capability mask (CDC_DVD_RAM | CDC_MRW_W | CDC_RAM | CDC_CD_RW) so the block layer reflects the drive's actual write support. The feature queries used (CDF_MRW and CDF_RWRT via GET CONFIGURATION with RT=00) report drive-level capabilities that are persistent across media, so a single probe before register_cdrom() is sufficient and the redundant probe at open time is dropped. With set_disk_ro() now accurate, the long-vestigial cd->writeable flag in sr can go: get_capabilities() used to set cd->writeable based on the same four mask bits, but because CDC_MRW_W and CDC_RAM default to "capability present" in cdi->mask and aren't touched by MODE SENSE, the condition that gated cd->writeable was always true, making it unconditionally 1. Replace the corresponding gate in sr_init_command() with get_disk_ro(cd->disk), which turns a previously no-op check into a real one and also catches kernel-internal bio writers that bypass blkdev_write_iter()'s bdev_read_only() check. The sd driver (SCSI disks) does not have this problem because it checks the MODE SENSE Write Protect bit and calls set_disk_ro() accordingly. The sr driver cannot use the same approach because the MMC specification does not define the WP bit in the MODE SENSE device-specific parameter byte for CD-ROM devices. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daan De Meyer Reviewed-by: Phillip Potter Reviewed-by: Martin K. Petersen Signed-off-by: Phillip Potter Link: https://patch.msgid.link/20260427210139.1400-2-phil@philpotter.co.uk Signed-off-by: Jens Axboe Signed-off-by: Sasha Levin

scsi: hpsa: Enlarge controller and IRQ name buffers

2026-05-23T11:09:15+00:00

[ Upstream commit 8e8cb6f39930e836144f51cdb6d409c9e4cb71fe ] hpsa formats the controller name into h->devname[8] and derives interrupt names from it in h->intrname[][16]. Once host_no reaches four digits, "hpsa%d" no longer fits in devname, and the derived IRQ names can then overrun the interrupt-name buffers as well. The previous fix switched these builders to bounded formatting, but that would truncate user-visible controller and IRQ names. Keep the existing names intact instead by enlarging the fixed buffers to cover the current formatted strings. Fixes: 2946e82bdd76 ("hpsa: use scsi host_no as hpsa controller number") Fixes: 8b47004a5512 ("hpsa: add interrupt number to /proc/interrupts interrupt name") Acked-by: Don Brace Signed-off-by: Pengpeng Hou Link: https://patch.msgid.link/20260401120552.78541-1-pengpeng@iscas.ac.cn Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qla2xxx: Add support to report MPI FW state

2026-05-23T11:09:14+00:00

[ Upstream commit 0e124af675ebabddacfeb0958abd443265dddf13 ] MPI firmware state was returned as 0. Get MPI FW state to proceed with flash image validation. A new sysfs node 'mpi_fw_state' is added to report MPI firmware state: /sys/class/scsi_host/hostXX/mpi_fw_state Fixes: d74181ca110e ("scsi: qla2xxx: Add bsg interface to support firmware img validation") Signed-off-by: Nilesh Javali Link: https://patch.msgid.link/20260305093337.2007205-1-njavali@marvell.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sg: Resolve soft lockup issue when opening /dev/sgX

2026-05-23T11:09:13+00:00

[ Upstream commit d06a310b45e153872033dd0cf19d5a2279121099 ] The parameter def_reserved_size defines the default buffer size reserved for each Sg_fd and should be restricted to a range between 0 and 1,048,576 (see https://tldp.org/HOWTO/SCSI-Generic-HOWTO/proc.html). Although the function sg_proc_write_dressz enforces this limit, it is possible to bypass it by directly modifying the module parameter as shown below, which then causes a soft lockup: echo -1 > /sys/module/sg/parameters/def_reserved_size exec 4<> /dev/sg0 watchdog: BUG: soft lockup - CPU#5 stuck for 26 seconds! [bash:537] Modules loaded: CPU: 5 UID: 0 PID: 537 Command: bash, kernel version 6.19.0-rc3+ #134, PREEMPT disabled Hardware: QEMU Standard PC (i440FX + PIIX, 1996), BIOS version 1.16.1-2.fc37 dated 04/01/2014 ... Call Trace: sg_build_reserve+0x5c/0xa0 sg_add_sfp+0x168/0x270 sg_open+0x16e/0x340 chrdev_open+0xbe/0x230 do_dentry_open+0x175/0x480 vfs_open+0x34/0xf0 do_open+0x265/0x3d0 path_openat+0x110/0x290 do_filp_open+0xc3/0x170 do_sys_openat2+0x71/0xe0 __x64_sys_openat+0x6d/0xa0 do_syscall_64+0x62/0x310 entry_SYSCALL_64_after_hwframe+0x76/0x7e The fix is to use module_param_cb to validate and reject invalid values assigned to def_reserved_size. Fixes: 6460e75a104d ("[SCSI] sg: fixes for large page_size") Signed-off-by: Yang Erkun Reviewed-by: Bart Van Assche Link: https://patch.msgid.link/20260127062044.3034148-3-yangerkun@huawei.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin