kernel/linux.git/drivers/scsi, branch v6.1.87

scsi: qla2xxx: Fix off by one in qla_edif_app_getstats()

2024-04-17T09:18:23+00:00

[ Upstream commit 4406e4176f47177f5e51b4cc7e6a7a2ff3dbfbbd ] The app_reply->elem[] array is allocated earlier in this function and it has app_req.num_ports elements. Thus this > comparison needs to be >= to prevent memory corruption. Fixes: 7878f22a2e03 ("scsi: qla2xxx: edif: Add getfcinfo and statistic bsgs") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/5c125b2f-92dd-412b-9b6f-fc3a3207bd60@moroto.mountain Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: hisi_sas: Modify the deadline for ata_wait_after_reset()

2024-04-17T09:18:23+00:00

[ Upstream commit 0098c55e0881f0b32591f2110410d5c8b7f9bd5a ] We found that the second parameter of function ata_wait_after_reset() is incorrectly used. We call smp_ata_check_ready_type() to poll the device type until the 30s timeout, so the correct deadline should be (jiffies + 30000). Fixes: 3c2673a09cf1 ("scsi: hisi_sas: Fix SATA devices missing issue during I_T nexus reset") Co-developed-by: xiabing Signed-off-by: xiabing Co-developed-by: Yihang Li Signed-off-by: Yihang Li Signed-off-by: Xiang Chen Link: https://lore.kernel.org/r/20240402035513.2024241-3-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sd: usb_storage: uas: Access media prior to querying device properties

2024-04-13T11:05:24+00:00

[ Upstream commit 321da3dc1f3c92a12e3c5da934090d2992a8814c ] It has been observed that some USB/UAS devices return generic properties hardcoded in firmware for mode pages for a period of time after a device has been discovered. The reported properties are either garbage or they do not accurately reflect the characteristics of the physical storage device attached in the case of a bridge. Prior to commit 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") we would call revalidate several times during device discovery. As a result, incorrect values would eventually get replaced with ones accurately describing the attached storage. When we did away with the redundant revalidate pass, several cases were reported where devices reported nonsensical values or would end up in write-protected state. An initial attempt at addressing this issue involved introducing a delayed second revalidate invocation. However, this approach still left some devices reporting incorrect characteristics. Tasos Sahanidis debugged the problem further and identified that introducing a READ operation prior to MODE SENSE fixed the problem and that it wasn't a timing issue. Issuing a READ appears to cause the devices to update their state to reflect the actual properties of the storage media. Device properties like vendor, model, and storage capacity appear to be correctly reported from the get-go. It is unclear why these devices defer populating the remaining characteristics. Match the behavior of a well known commercial operating system and trigger a READ operation prior to querying device characteristics to force the device to populate the mode pages. The additional READ is triggered by a flag set in the USB storage and UAS drivers. We avoid issuing the READ for other transport classes since some storage devices identify Linux through our particular discovery command sequence. Link: https://lore.kernel.org/r/20240213143306.2194237-1-martin.petersen@oracle.com Fixes: 1e029397d12f ("scsi: sd: Reorganize DIF/DIX code to avoid calling revalidate twice") Cc: stable@vger.kernel.org Reported-by: Tasos Sahanidis Reviewed-by: Ewan D. Milne Reviewed-by: Bart Van Assche Tested-by: Tasos Sahanidis Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman

Revert "scsi: core: Add struct for args to execution functions"

2024-04-13T11:05:24+00:00

This reverts commit cf33e6ca12d814e1be2263cb76960d0019d7fb94 which is commit d0949565811f0896c1c7e781ab2ad99d34273fdf upstream. It is known to cause problems and has asked to be dropped. Link: https://lore.kernel.org/r/yq1frvvpymp.fsf@ca-mkp.ca.oracle.com Cc: Tasos Sahanidis Cc: Ewan D. Milne Cc: Bart Van Assche Cc: Tasos Sahanidis Cc: Martin K. Petersen Cc: James Bottomley Cc: Sasha Levin Reported-by: John David Anglin Reported-by: Cyril Brulebois Signed-off-by: Greg Kroah-Hartman

Revert "scsi: sd: usb_storage: uas: Access media prior to querying device properties"

2024-04-13T11:05:23+00:00

This reverts commit b73dd5f9997279715cd450ee8ca599aaff2eabb9 which is commit 321da3dc1f3c92a12e3c5da934090d2992a8814c upstream. It is known to cause problems and has asked to be dropped. Link: https://lore.kernel.org/r/yq1frvvpymp.fsf@ca-mkp.ca.oracle.com Cc: Tasos Sahanidis Cc: Ewan D. Milne Cc: Bart Van Assche Cc: Tasos Sahanidis Cc: Martin K. Petersen Cc: James Bottomley Cc: Sasha Levin Reported-by: John David Anglin Reported-by: Cyril Brulebois Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix possible memory leak in lpfc_rcv_padisc()

2024-04-13T11:05:06+00:00

[ Upstream commit 2ae917d4bcab80ab304b774d492e2fcd6c52c06b ] The call to lpfc_sli4_resume_rpi() in lpfc_rcv_padisc() may return an unsuccessful status. In such cases, the elsiocb is not issued, the completion is not called, and thus the elsiocb resource is leaked. Check return value after calling lpfc_sli4_resume_rpi() and conditionally release the elsiocb resource. Signed-off-by: Justin Tee Link: https://lore.kernel.org/r/20240131185112.149731-3-justintee8345@gmail.com Reviewed-by: Himanshu Madhani Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: sd: Unregister device if device_add_disk() failed in sd_probe()

2024-04-10T14:28:31+00:00

[ Upstream commit 0296bea01cfa6526be6bd2d16dc83b4e7f1af91f ] "if device_add() succeeds, you should call device_del() when you want to get rid of it." In sd_probe(), device_add_disk() fails when device_add() has already succeeded, so change put_device() to device_unregister() to ensure device resources are released. Fixes: 2a7a891f4c40 ("scsi: sd: Add error handling support for add_disk()") Signed-off-by: Li Nan Link: https://lore.kernel.org/r/20231208082335.1754205-1-linan666@huaweicloud.com Reviewed-by: Bart Van Assche Reviewed-by: Yu Kuai Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: mylex: Fix sysfs buffer lengths

2024-04-10T14:28:31+00:00

[ Upstream commit 1197c5b2099f716b3de327437fb50900a0b936c9 ] The myrb and myrs drivers use an odd way of implementing their sysfs files, calling snprintf() with a fixed length of 32 bytes to print into a page sized buffer. One of the strings is actually longer than 32 bytes, which clang can warn about: drivers/scsi/myrb.c:1906:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation] drivers/scsi/myrs.c:1089:10: error: 'snprintf' will always be truncated; specified size is 32, but format string expands to at least 34 [-Werror,-Wformat-truncation] These could all be plain sprintf() without a length as the buffer is always long enough. On the other hand, sysfs files should not be overly long either, so just double the length to make sure the longest strings don't get truncated here. Fixes: 77266186397c ("scsi: myrs: Add Mylex RAID controller (SCSI interface)") Fixes: 081ff398c56c ("scsi: myrb: Add Mylex RAID controller (block interface)") Signed-off-by: Arnd Bergmann Link: https://lore.kernel.org/r/20240326223825.4084412-8-arnd@kernel.org Reviewed-by: Hannes Reinecke Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libsas: Fix disk not being scanned in after being removed

2024-04-03T13:19:54+00:00

commit 8e68a458bcf5b5cb9c3624598bae28f08251601f upstream. As of commit d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info"), do discovery will send a new SMP_DISCOVER and update phy->phy_change_count. We found that if the disk is reconnected and phy change_count changes at this time, the disk scanning process will not be triggered. Therefore, call sas_set_ex_phy() to update the PHY info with the results of the last query. And because the previous phy info will be used when calling sas_unregister_devs_sas_addr(), sas_unregister_devs_sas_addr() should be called before sas_set_ex_phy(). Fixes: d8649fc1c5e4 ("scsi: libsas: Do discovery on empty PHY to update PHY info") Signed-off-by: Xingui Yang Link: https://lore.kernel.org/r/20240307141413.48049-3-yangxingui@huawei.com Reviewed-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: libsas: Add a helper sas_get_sas_addr_and_dev_type()

2024-04-03T13:19:54+00:00

commit a57345279fd311ba679b8083feb0eec5272c7729 upstream. Add a helper to get attached_sas_addr and device type from disc_resp. Suggested-by: John Garry Signed-off-by: Xingui Yang Link: https://lore.kernel.org/r/20240307141413.48049-2-yangxingui@huawei.com Reviewed-by: John Garry Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman