kernel/linux.git/drivers/scsi, branch v5.4.50

scsi: lpfc: Avoid another null dereference in lpfc_sli4_hba_unset()

2020-06-30T19:37:00+00:00

[ Upstream commit 46da547e21d6cefceec3fb3dba5ebbca056627fc ] Commit cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") has introduced static checker warnings for potential null dereferences in 'lpfc_sli4_hba_unset()' and commit 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning in lpfc_sli4_hba_unset") has tried to fix it. However, yet another potential null dereference is remaining. This commit fixes it. This bug was discovered and resolved using Coverity Static Analysis Security Testing (SAST) by Synopsys, Inc. Link: https://lore.kernel.org/r/20200623084122.30633-1-sjpark@amazon.com Fixes: 1ffdd2c0440d ("scsi: lpfc: resolve static checker warning inlpfc_sli4_hba_unset") Fixes: cdb42becdd40 ("scsi: lpfc: Replace io_channels for nvme and fcp with general hdw_queues per cpu") Reviewed-by: James Smart Signed-off-by: SeongJae Park Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qla2xxx: Keep initiator ports after RSCN

2020-06-30T19:36:50+00:00

commit 632f24f09d5b7c8a2f94932c3391ca957ae76cc4 upstream. The driver performs SCR (state change registration) in all modes including pure target mode. For each RSCN, scan_needed flag is set in qla2x00_handle_rscn() for the port mentioned in the RSCN and fabric rescan is scheduled. During the rescan, GNN_FT handler, qla24xx_async_gnnft_done() deletes session of the port that caused the RSCN. In target mode, the session deletion has an impact on ATIO handler, qlt_24xx_atio_pkt(). Target responds with SAM STATUS BUSY to I/O incoming from the deleted session. qlt_handle_cmd_for_atio() and qlt_handle_task_mgmt() return -EFAULT if they are not able to find session of the command/TMF, and that results in invocation of qlt_send_busy(): qlt_24xx_atio_pkt_all_vps: qla_target(0): type 6 ox_id 0014 qla_target(0): Unable to send command to target, sending BUSY status Such response causes command timeout on the initiator. Error handler thread on the initiator will be spawned to abort the commands: scsi 23:0:0:0: tag#0 abort scheduled scsi 23:0:0:0: tag#0 aborting command qla2xxx [0000:af:00.0]-188c:23: Entered qla24xx_abort_command. qla2xxx [0000:af:00.0]-801c:23: Abort command issued nexus=23:0:0 -- 0 2003. Command abort is rejected by target and fails (2003), error handler then tries to perform DEVICE RESET and TARGET RESET but they're also doomed to fail because TMFs are ignored for the deleted sessions. Then initiator makes BUS RESET that resets the link via qla2x00_full_login_lip(). BUS RESET succeeds and brings initiator port up, SAN switch detects that and sends RSCN to the target port and it fails again the same way as described above. It never goes out of the loop. The change breaks the RSCN loop by keeping initiator sessions mentioned in RSCN payload in all modes, including dual and pure target mode. Link: https://lore.kernel.org/r/20200605144435.27023-1-r.bolshakov@yadro.com Fixes: 2037ce49d30a ("scsi: qla2xxx: Fix stale session") Cc: Quinn Tran Cc: Arun Easi Cc: Nilesh Javali Cc: Bart Van Assche Cc: Daniel Wagner Cc: Himanshu Madhani Cc: Martin Wilck Cc: stable@vger.kernel.org # v5.4+ Reviewed-by: Daniel Wagner Reviewed-by: Shyam Sundar Reviewed-by: Himanshu Madhani Signed-off-by: Roman Bolshakov Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: ufs-bsg: Fix runtime PM imbalance on error

2020-06-24T15:50:47+00:00

[ Upstream commit a1e17eb03e69bb61bd1b1a14610436b7b9be12d9 ] When ufs_bsg_alloc_desc_buffer() returns an error code, a pairing runtime PM usage counter decrement is needed to keep the counter balanced. Link: https://lore.kernel.org/r/20200522045932.31795-1-dinghao.liu@zju.edu.cn Fixes: 74e5e468b664 (scsi: ufs-bsg: Wake the device before sending raw upiu commands) Reviewed-by: Avri Altman Signed-off-by: Dinghao Liu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: acornscsi: Fix an error handling path in acornscsi_probe()

2020-06-24T15:50:43+00:00

[ Upstream commit 42c76c9848e13dbe0538d7ae0147a269dfa859cb ] 'ret' is known to be 0 at this point. Explicitly return -ENOMEM if one of the 'ecardm_iomap()' calls fail. Link: https://lore.kernel.org/r/20200530081622.577888-1-christophe.jaillet@wanadoo.fr Fixes: e95a1b656a98 ("[ARM] rpc: acornscsi: update to new style ecard driver") Signed-off-by: Christophe JAILLET Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs: Don't update urgent bkops level when toggling auto bkops

2020-06-24T15:50:38+00:00

[ Upstream commit be32acff43800c87dc5c707f5d47cc607b76b653 ] Urgent bkops level is used to compare against actual bkops status read from UFS device. Urgent bkops level is set during initialization and might be updated in exception event handler during runtime. But it should not be updated to the actual bkops status every time when auto bkops is toggled. Otherwise, if urgent bkops level is updated to 0, auto bkops shall always be kept enabled. Link: https://lore.kernel.org/r/1590632686-17866-1-git-send-email-cang@codeaurora.org Fixes: 24366c2afbb0 ("scsi: ufs: Recheck bkops level if bkops is disabled") Reviewed-by: Stanley Chu Signed-off-by: Can Guo Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj

2020-06-24T15:50:37+00:00

[ Upstream commit 0267ffce562c8bbf9b57ebe0e38445ad04972890 ] kobject_init_and_add() takes reference even when it fails. If this function returns an error, kobject_put() must be called to properly clean up the memory associated with the object. Link: https://lore.kernel.org/r/20200528201353.14849-1-wu000273@umn.edu Reviewed-by: Lee Duncan Signed-off-by: Qiushi Wu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ufs-qcom: Fix scheduling while atomic issue

2020-06-24T15:50:34+00:00

[ Upstream commit 3be60b564de49875e47974c37fabced893cd0931 ] ufs_qcom_dump_dbg_regs() uses usleep_range, a sleeping function, but can be called from atomic context in the following flow: ufshcd_intr -> ufshcd_sl_intr -> ufshcd_check_errors -> ufshcd_print_host_regs -> ufshcd_vops_dbg_register_dump -> ufs_qcom_dump_dbg_regs This causes a boot crash on the Lenovo Miix 630 when the interrupt is handled on the idle thread. Fix the issue by switching to udelay(). Link: https://lore.kernel.org/r/20200525204125.46171-1-jeffrey.l.hugo@gmail.com Fixes: 9c46b8676271 ("scsi: ufs-qcom: dump additional testbus registers") Reviewed-by: Bean Huo Reviewed-by: Avri Altman Signed-off-by: Jeffrey Hugo Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: mpt3sas: Fix double free warnings

2020-06-24T15:50:26+00:00

[ Upstream commit cbbfdb2a2416c9f0cde913cf09670097ac281282 ] Fix following warning from Smatch static analyser: drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->hpr_lookup' double freed drivers/scsi/mpt3sas/mpt3sas_base.c:5256 _base_allocate_memory_pools() warn: 'ioc->internal_lookup' double freed Link: https://lore.kernel.org/r/20200508110738.30732-1-suganath-prabu.subramani@broadcom.com Reported-by: Dan Carpenter Signed-off-by: Suganath Prabu S Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qla2xxx: Fix warning after FC target reset

2020-06-24T15:50:24+00:00

[ Upstream commit f839544ccff60cbe534282aac68858fc3fb278ca ] Currently, FC target reset finishes with the warning message: [84010.596893] ------------[ cut here ]------------ [84010.596917] WARNING: CPU: 238 PID: 279973 at ../drivers/scsi/qla2xxx/qla_target.c:6644 qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.596918] Modules linked in: vrf af_packet 8021q garp mrp stp llc netlink_diag target_tatlin_tblock(OEX) dm_ec(OEX) ttln_rdma(OEX) dm_frontend(OEX) nvme_rdma nvmet tcm_qla2xxx iscsi_target_mod target_core_mod at24 nvmem_core pnv_php ipmi_watchdog ipmi_ssif vmx_crypto gf128mul crct10dif_vpmsum qla2xxx rpcrdma nvme_fc powernv_flash(X) nvme_fabrics uio_pdrv_genirq mtd rtc_opal(X) ibmpowernv(X) opal_prd(X) uio scsi_transport_fc i2c_opal(X) ses enclosure ipmi_poweroff ast i2c_algo_bit ttm bmc_mcu(OEX) drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm drm_panel_orientation_quirks agpgart nfsd auth_rpcgss nfs_acl ipmi_powernv(X) lockd ipmi_devintf ipmi_msghandler grace dummy ext4 crc16 jbd2 mbcache sd_mod rdma_ucm ib_iser rdma_cm ib_umad iw_cm ib_ipoib libiscsi scsi_transport_iscsi ib_cm [84010.596975] configfs mlx5_ib ib_uverbs ib_core mlx5_core crc32c_vpmsum xhci_pci xhci_hcd mpt3sas(OEX) tg3 usbcore mlxfw tls raid_class libphy scsi_transport_sas devlink ptp pps_core nvme nvme_core sunrpc dm_mirror dm_region_hash dm_log sg dm_multipath dm_mod scsi_dh_rdac scsi_dh_emc scsi_dh_alua scsi_mod autofs4 [84010.597001] Supported: Yes, External [84010.597004] CPU: 238 PID: 279973 Comm: bash Tainted: G OE 4.12.14-197.29-default #1 SLE15-SP1 [84010.597006] task: c000000a104c0000 task.stack: c000000b52188000 [84010.597007] NIP: d00000001ffd7f78 LR: d00000001ffd7f6c CTR: c0000000001676c0 [84010.597008] REGS: c000000b5218b910 TRAP: 0700 Tainted: G OE (4.12.14-197.29-default) [84010.597008] MSR: 900000010282b033 [84010.597015] CR: 48242424 XER: 00000000 [84010.597016] CFAR: d00000001ff45d08 SOFTE: 1 GPR00: d00000001ffd7f6c c000000b5218bb90 d00000002001b228 0000000000000102 GPR04: 0000000000000001 0000000000000001 00013d91ed0a5e2d 0000000000000000 GPR08: c000000007793300 0000000000000000 0000000000000000 c000000a086e7818 GPR12: 0000000000002200 c000000007793300 0000000000000000 000000012bc937c0 GPR16: 000000012bbf7ed0 0000000000000000 000000012bc3dd10 0000000000000000 GPR20: 000000012bc4db28 0000010036442810 000000012bc97828 000000012bc96c70 GPR24: 00000100365b1550 0000000000000000 00000100363f3d80 c000000be20d3080 GPR28: c000000bda7eae00 c000000be20db7e8 c000000be20d3778 c000000be20db7e8 [84010.597042] NIP [d00000001ffd7f78] qlt_enable_vha+0x1d0/0x260 [qla2xxx] [84010.597051] LR [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] [84010.597051] Call Trace: [84010.597061] [c000000b5218bb90] [d00000001ffd7f6c] qlt_enable_vha+0x1c4/0x260 [qla2xxx] (unreliable) [84010.597064] [c000000b5218bc20] [d000000009820b6c] tcm_qla2xxx_tpg_enable_store+0xc4/0x130 [tcm_qla2xxx] [84010.597067] [c000000b5218bcb0] [d0000000185d0e68] configfs_write_file+0xd0/0x190 [configfs] [84010.597072] [c000000b5218bd00] [c0000000003d0edc] __vfs_write+0x3c/0x1e0 [84010.597074] [c000000b5218bd90] [c0000000003d2ea8] vfs_write+0xd8/0x220 [84010.597076] [c000000b5218bde0] [c0000000003d4ddc] SyS_write+0x6c/0x110 [84010.597079] [c000000b5218be30] [c00000000000b188] system_call+0x3c/0x130 [84010.597080] Instruction dump: [84010.597082] 7d0050a8 7d084b78 7d0051ad 40c2fff4 7fa3eb78 4bf73965 60000000 7fa3eb78 [84010.597086] 4bf6dcd9 60000000 2fa30000 419eff40 <0fe00000> 4bffff38 e95f0058 a12a0180 [84010.597090] ---[ end trace e32abaf6e6fee826 ]--- To reproduce: echo 0x7fffffff > /sys/module/qla2xxx/parameters/logging modprobe target_core_mod modprobe tcm_qla2xxx mkdir /sys/kernel/config/target/qla2xxx mkdir /sys/kernel/config/target/qla2xxx/ mkdir /sys/kernel/config/target/qla2xxx//tpgt_1 echo 1 > /sys/kernel/config/target/qla2xxx//tpgt_1/enable echo 0 > /sys/kernel/config/target/qla2xxx//tpgt_1/enable echo 1 > /sys/kernel/config/target/qla2xxx//tpgt_1/enable SYSTEM START kernel: pid 327:drivers/scsi/qla2xxx/qla_init.c:2174 qla2x00_initialize_adapter(): vha->flags.online 0x0 <...> kernel: pid 327:drivers/scsi/qla2xxx/qla_os.c:3444 qla2x00_probe_one(): vha->flags.online 0x1 echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6998 qla2x00_restart_isp(): vha->flags.online 0x0 echo 0 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 348:drivers/scsi/qla2xxx/qla_init.c:6641 qla2x00_abort_isp_cleanup(): vha->flags.online 0x0, ISP_ABORT_NEEDED 0x0 <...> kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 echo 1 > /sys/kernel/config/target/qla2xxx/21:00:00:24:ff:86:a6:2a/tpgt_1/enable kernel: pid 1404:drivers/scsi/qla2xxx/qla_os.c:1107 qla2x00_wait_for_hba_online(): base_vha->flags.online 0x0 kernel: -----------[ cut here ]----------- kernel: WARNING: CPU: 1 PID: 1404 at drivers/scsi/qla2xxx/qla_target.c:6654 qlt_enable_vha+0x1e0/0x280 [qla2xxx] The issue happens because no real ISP reset is executed. The qla2x00_abort_isp(scsi_qla_host_t *vha) function expects that vha->flags.online will be not zero for ISP reset procedure. This patch sets vha->flags.online to 1 before calling ->abort_isp() for starting the ISP reset. Link: https://lore.kernel.org/r/1d7b21bf9f7676643239eb3d60eaca7cfa505cf0.camel@yadro.com Reviewed-by: Roman Bolshakov Signed-off-by: Viacheslav Dubeyko Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: qedf: Fix crash when MFW calls for protocol stats while function is still probing

2020-06-24T15:50:21+00:00

[ Upstream commit ad40f5256095c68dc17c991eb976261d5ea2daaa ] The MFW may make a call to qed and then to qedf for protocol statistics while the function is still probing. If this happens it's possible that some members of the struct qedf_ctx may not be fully initialized which can result in a NULL pointer dereference or general protection fault. To prevent this, add a new flag call QEDF_PROBING and set it when the __qedf_probe() function is active. Then in the qedf_get_protocol_tlv_data() function we can check if the function is still probing and return immediantely before any uninitialized structures can be touched. Link: https://lore.kernel.org/r/20200416084314.18851-9-skashyap@marvell.com Signed-off-by: Chad Dupuis Signed-off-by: Saurav Kashyap Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin