kernel/linux.git/drivers/scsi, branch v4.4.235

scsi: ufs: Fix possible infinite loop in ufshcd_hold

2020-09-03T09:19:25+00:00

[ Upstream commit 93b6c5db06028a3b55122bbb74d0715dd8ca4ae0 ] In ufshcd_suspend(), after clk-gating is suspended and link is set as Hibern8 state, ufshcd_hold() is still possibly invoked before ufshcd_suspend() returns. For example, MediaTek's suspend vops may issue UIC commands which would call ufshcd_hold() during the command issuing flow. Now if UFSHCD_CAP_HIBERN8_WITH_CLK_GATING capability is enabled, then ufshcd_hold() may enter infinite loops because there is no clk-ungating work scheduled or pending. In this case, ufshcd_hold() shall just bypass, and keep the link as Hibern8 state. Link: https://lore.kernel.org/r/20200809050734.18740-1-stanley.chu@mediatek.com Reviewed-by: Avri Altman Co-developed-by: Andy Teng Signed-off-by: Andy Teng Signed-off-by: Stanley Chu Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: fcoe: Memory leak fix in fcoe_sysfs_fcf_del()

2020-09-03T09:19:25+00:00

[ Upstream commit e95b4789ff4380733006836d28e554dc296b2298 ] In fcoe_sysfs_fcf_del(), we first deleted the fcf from the list and then freed it if ctlr_dev was not NULL. This was causing a memory leak. Free the fcf even if ctlr_dev is NULL. Link: https://lore.kernel.org/r/20200729081824.30996-3-jhasan@marvell.com Reviewed-by: Girish Basrur Reviewed-by: Santosh Vernekar Reviewed-by: Saurav Kashyap Reviewed-by: Shyam Sundar Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: iscsi: Do not put host in iscsi_set_flashnode_param()

2020-09-03T09:19:24+00:00

[ Upstream commit 68e12e5f61354eb42cfffbc20a693153fc39738e ] If scsi_host_lookup() fails we will jump to put_host which may cause a panic. Jump to exit_set_fnode instead. Link: https://lore.kernel.org/r/20200615081226.183068-1-jingxiangfeng@huawei.com Reviewed-by: Mike Christie Signed-off-by: Jing Xiangfeng Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: lpfc: Fix shost refcount mismatch when deleting vport

2020-09-03T09:19:24+00:00

[ Upstream commit 03dbfe0668e6692917ac278883e0586cd7f7d753 ] When vports are deleted, it is observed that there is memory/kthread leakage as the vport isn't fully being released. There is a shost reference taken in scsi_add_host_dma that is not released during scsi_remove_host. It was noticed that other drivers resolve this by doing a scsi_host_put after calling scsi_remove_host. The vport_delete routine is taking two references one that corresponds to an access to the scsi_host in the vport_delete routine and another that is released after the adapter mailbox command completes that destroys the VPI that corresponds to the vport. Remove one of the references taken such that the second reference that is put will complete the missing scsi_add_host_dma reference and the shost will be terminated. Link: https://lore.kernel.org/r/20200630215001.70793-8-jsmart2021@gmail.com Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: libfc: Free skb in fc_disc_gpn_id_resp() for valid cases

2020-08-26T08:27:09+00:00

[ Upstream commit ec007ef40abb6a164d148b0dc19789a7a2de2cc8 ] In fc_disc_gpn_id_resp(), skb is supposed to get freed in all cases except for PTR_ERR. However, in some cases it didn't. This fix is to call fc_frame_free(fp) before function returns. Link: https://lore.kernel.org/r/20200729081824.30996-2-jhasan@marvell.com Reviewed-by: Girish Basrur Reviewed-by: Santosh Vernekar Reviewed-by: Saurav Kashyap Reviewed-by: Shyam Sundar Signed-off-by: Javed Hasan Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: mesh: Fix panic after host or bus reset

2020-08-21T08:53:02+00:00

[ Upstream commit edd7dd2292ab9c3628b65c4d04514c3068ad54f6 ] Booting Linux with a Conner CP3200 drive attached to the MESH SCSI bus results in EH measures and a panic: [ 25.499838] mesh: configured for synchronous 5 MB/s [ 25.787154] mesh: performing initial bus reset... [ 29.867115] scsi host0: MESH [ 29.929527] mesh: target 0 synchronous at 3.6 MB/s [ 29.998763] scsi 0:0:0:0: Direct-Access CONNER CP3200-200mb-3.5 4040 PQ: 0 ANSI: 1 CCS [ 31.989975] sd 0:0:0:0: [sda] 415872 512-byte logical blocks: (213 MB/203 MiB) [ 32.070975] sd 0:0:0:0: [sda] Write Protect is off [ 32.137197] sd 0:0:0:0: [sda] Mode Sense: 5b 00 00 08 [ 32.209661] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 32.332708] sda: [mac] sda1 sda2 sda3 [ 32.417733] sd 0:0:0:0: [sda] Attached SCSI disk ... snip ... [ 76.687067] mesh_abort((ptrval)) [ 76.743606] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 76.810798] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 76.880720] dma stat=84e0 cmdptr=1f73d000 [ 76.941387] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.005567] dma_st=1 dma_ct=0 n_msgout=0 [ 77.065456] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.130512] mesh_abort((ptrval)) [ 77.187670] mesh: state at (ptrval), regs at (ptrval), dma at (ptrval) [ 77.255594] ct=6000 seq=86 bs=4017 fc= 0 exc= 0 err= 0 im= 7 int= 0 sp=85 [ 77.325778] dma stat=84e0 cmdptr=1f73d000 [ 77.387239] phase=4 msgphase=0 conn_tgt=0 data_ptr=24576 [ 77.453665] dma_st=1 dma_ct=0 n_msgout=0 [ 77.515900] target 0: req=(ptrval) goes_out=0 saved_ptr=0 [ 77.582902] mesh_host_reset [ 88.187083] Kernel panic - not syncing: mesh: double DMA start ! [ 88.254510] CPU: 0 PID: 358 Comm: scsi_eh_0 Not tainted 5.6.13-pmac #1 [ 88.323302] Call Trace: [ 88.378854] [e16ddc58] [c0027080] panic+0x13c/0x308 (unreliable) [ 88.446221] [e16ddcb8] [c02b2478] mesh_start.part.12+0x130/0x414 [ 88.513298] [e16ddcf8] [c02b2fc8] mesh_queue+0x54/0x70 [ 88.577097] [e16ddd18] [c02a1848] scsi_send_eh_cmnd+0x374/0x384 [ 88.643476] [e16dddc8] [c02a1938] scsi_eh_tur+0x5c/0xb8 [ 88.707878] [e16dddf8] [c02a1ab8] scsi_eh_test_devices+0x124/0x178 [ 88.775663] [e16dde28] [c02a2094] scsi_eh_ready_devs+0x588/0x8a8 [ 88.843124] [e16dde98] [c02a31d8] scsi_error_handler+0x344/0x520 [ 88.910697] [e16ddf08] [c00409c8] kthread+0xe4/0xe8 [ 88.975166] [e16ddf38] [c000f234] ret_from_kernel_thread+0x14/0x1c [ 89.044112] Rebooting in 180 seconds.. In theory, a panic can happen after a bus or host reset with dma_started flag set. Fix this by halting the DMA before reinitializing the host. Don't assume that ms->current_req is set when halt_dma() is invoked as it may not hold for bus or host reset. BTW, this particular Conner drive can be made to work by inhibiting disconnect/reselect with 'mesh.resel_targets=0'. Link: https://lore.kernel.org/r/3952bc691e150a7128b29120999b6092071b039a.1595460351.git.fthain@telegraphics.com.au Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: Paul Mackerras Reported-and-tested-by: Stan Johnson Signed-off-by: Finn Thain Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: eesox: Fix different dev_id between request_irq() and free_irq()

2020-08-21T08:53:01+00:00

[ Upstream commit 86f2da1112ccf744ad9068b1d5d9843faf8ddee6 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200626040553.944352-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: powertec: Fix different dev_id between request_irq() and free_irq()

2020-08-21T08:53:01+00:00

[ Upstream commit d179f7c763241c1dc5077fca88ddc3c47d21b763 ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200626035948.944148-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Christophe JAILLET Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: cumana_2: Fix different dev_id between request_irq() and free_irq()

2020-08-21T08:53:00+00:00

[ Upstream commit 040ab9c4fd0070cd5fa71ba3a7b95b8470db9b4d ] The dev_id used in request_irq() and free_irq() should match. Use 'info' in both cases. Link: https://lore.kernel.org/r/20200625204730.943520-1-christophe.jaillet@wanadoo.fr Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Acked-by: Russell King Signed-off-by: Christophe JAILLET Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: scsi_transport_spi: Fix function pointer check

2020-07-31T14:43:11+00:00

[ Upstream commit 5aee52c44d9170591df65fafa1cd408acc1225ce ] clang static analysis flags several null function pointer problems. drivers/scsi/scsi_transport_spi.c:374:1: warning: Called function pointer is null (null dereference) [core.CallAndMessage] spi_transport_max_attr(offset, "%d\n"); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Reviewing the store_spi_store_max macro if (i->f->set_##field) return -EINVAL; should be if (!i->f->set_##field) return -EINVAL; Link: https://lore.kernel.org/r/20200627133242.21618-1-trix@redhat.com Reviewed-by: James Bottomley Signed-off-by: Tom Rix Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin