kernel/linux.git/drivers/scsi/pmcraid.c, branch v6.12.80

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2024-09-29T16:22:34+00:00

Pull more SCSI updates from James Bottomley: "These are mostly minor updates. There are two drivers (lpfc and mpi3mr) which missed the initial pull and a core change to retry a start/stop unit which affect suspend/resume" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: lpfc: Update lpfc version to 14.4.0.5 scsi: lpfc: Support loopback tests with VMID enabled scsi: lpfc: Revise TRACE_EVENT log flag severities from KERN_ERR to KERN_WARNING scsi: lpfc: Ensure DA_ID handling completion before deleting an NPIV instance scsi: lpfc: Fix kref imbalance on fabric ndlps from dev_loss_tmo handler scsi: lpfc: Restrict support for 32 byte CDBs to specific HBAs scsi: lpfc: Update phba link state conditional before sending CMF_SYNC_WQE scsi: lpfc: Add ELS_RSP cmd to the list of WQEs to flush in lpfc_els_flush_cmd() scsi: mpi3mr: Update driver version to 8.12.0.0.50 scsi: mpi3mr: Improve wait logic while controller transitions to READY state scsi: mpi3mr: Update MPI Headers to revision 34 scsi: mpi3mr: Use firmware-provided timestamp update interval scsi: mpi3mr: Enhance the Enable Controller retry logic scsi: sd: Fix off-by-one error in sd_read_block_characteristics() scsi: pm8001: Do not overwrite PCI queue mapping scsi: scsi_debug: Remove a useless memset() scsi: pmcraid: Convert comma to semicolon scsi: sd: Retry START STOP UNIT commands scsi: mpi3mr: A performance fix scsi: ufs: qcom: Update MODE_MAX cfg_bw value ...

scsi: pmcraid: Convert comma to semicolon

2024-09-13T00:42:09+00:00

Replace comma between expressions with semicolons. Using a ',' in place of a ';' can have unintended side effects. Although that is not the case here, it is seems best to use ';' unless ',' is intended. Found by inspection. No functional change intended. Compile tested only. Signed-off-by: Chen Ni Link: https://lore.kernel.org/r/20240905023521.1642862-1-nichen@iscas.ac.cn Signed-off-by: Martin K. Petersen

treewide: correct the typo 'retun'

2024-09-09T23:47:43+00:00

There are some spelling mistakes of 'retun' in comments which should be instead of 'return'. Link: https://lkml.kernel.org/r/63D0F870EE8E87A0+20240906054008.390188-1-wangyuli@uniontech.com Signed-off-by: WangYuli Signed-off-by: Andrew Morton

Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-05-21T17:09:28+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...

scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY

2024-05-16T19:35:08+00:00

Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-27-dlemoal@kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Bjorn Helgaas Acked-by: Martin K. Petersen

scsi: pmcraid: Switch to using ->device_configure

2024-04-12T01:37:49+00:00

Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240409143748.980206-17-hch@lst.de Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: pmcraid: Make pmcraid_class constant

2024-03-10T22:15:48+00:00

Since commit 43a7206b0963 ("driver core: class: make class_register() take a const *"), the driver core allows for struct class to be in read-only memory, so move the pmcraid_class structure to be declared at build time placing it into read-only memory, instead of having to be dynamically allocated at boot time. Cc: Greg Kroah-Hartman Suggested-by: Greg Kroah-Hartman Signed-off-by: Ricardo B. Marliere Link: https://lore.kernel.org/r/20240302-class_cleanup-scsi-v1-2-b9096b990e27@marliere.net Signed-off-by: Martin K. Petersen

scsi: pmcraid: Add missing scsi_device_put() in pmcraid_eh_target_reset_handler()

2023-10-25T02:24:32+00:00

When breaking out of an shost_for_each_device() loop one needs to do an explicit scsi_device_put(). Fixes: c2a14ab3b9b3 ("scsi: pmcraid: Select device in pmcraid_eh_target_reset_handler()") Signed-off-by: Hannes Reinecke Link: https://lore.kernel.org/r/20231023072957.20191-1-hare@suse.de Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: pmcraid: Fix kernel-doc comment

2023-10-25T02:21:51+00:00

Fix kernel-doc comment to silence the warnings: drivers/scsi/pmcraid.c:2697: warning: Excess function parameter 'scsi_cmd' description in 'pmcraid_reset_device' drivers/scsi/pmcraid.c:2697: warning: Function parameter or member 'scsi_dev' not described in 'pmcraid_reset_device' Reported-by: Abaci Robot Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6843 Signed-off-by: Yang Li Link: https://lore.kernel.org/r/20231017025853.67562-1-yang.lee@linux.alibaba.com Signed-off-by: Martin K. Petersen

scsi: pmcraid: Select device in pmcraid_eh_target_reset_handler()

2023-10-13T18:23:15+00:00

The reset code requires a device to be selected, but we shouldn't rely on the command to provide a device for us. So select the first device on the target when sending down a target reset. Signed-off-by: Hannes Reinecke Link: https://lore.kernel.org/r/20231002154328.43718-18-hare@suse.de Reviewed-by: Christoph Hellwig Signed-off-by: Martin K. Petersen