kernel/linux.git/drivers/scsi/pmcraid.c, branch linux-5.11.y

scsi: pmcraid: Use generic power management

2020-11-26T04:23:22+00:00

Drivers should do only device-specific jobs. But in general, drivers using legacy PCI PM framework for .suspend()/.resume() have to manage many PCI PM-related tasks themselves which can be done by PCI Core itself. This brings extra load on the driver and it directly calls PCI helper functions to handle them. Switch to the new generic framework by updating function signatures and define a "struct dev_pm_ops" variable to bind PM callbacks. Also, remove unnecessary calls to the PCI Helper functions along with the legacy .suspend & .resume bindings. Link: https://lore.kernel.org/r/20201102164730.324035-30-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta Signed-off-by: Martin K. Petersen

scsi: pmcraid: Drop PCI Wakeup calls from .resume

2020-11-26T04:23:22+00:00

The driver calls pci_enable_wake(...., false) in pmcraid_resume(), and there is no corresponding pci_enable_wake(...., true) in pmcraid_suspend(). Either it should do enable-wake the device in .suspend() or should not invoke pci_enable_wake() at all. Concluding that this driver doesn't support enable-wake and PCI core calls pci_enable_wake(pci_dev, PCI_D0, false) during resume, drop it from pmcraid_resume(). Link: https://lore.kernel.org/r/20201102164730.324035-29-vaibhavgupta40@gmail.com Signed-off-by: Vaibhav Gupta Signed-off-by: Martin K. Petersen

scsi: pmcraid: Remove set but not used 'res'

2020-09-10T02:40:41+00:00

This addresses the following gcc warning with "make W=1": drivers/scsi/pmcraid.c: In function ‘pmcraid_abort_cmd’: drivers/scsi/pmcraid.c:2863:33: warning: variable ‘res’ set but not used [-Wunused-but-set-variable] struct pmcraid_resource_entry *res; ^ Link: https://lore.kernel.org/r/20200909082627.101984-2-yebin10@huawei.com Reported-by: Hulk Robot Signed-off-by: Ye Bin Signed-off-by: Martin K. Petersen

scsi: pmcraid: Remove superfluous memset()

2020-08-21T03:25:48+00:00

Fixes coccicheck warning: ./drivers/scsi/pmcraid.c:4709:3-21: WARNING: dma_alloc_coherent use in pinstance -> hrrq_start [ i ] already zeroes out memory, so memset is not needed dma_alloc_coherent() already zeroes out memory so memset() is not needed. Link: https://lore.kernel.org/r/1596079918-41115-2-git-send-email-liheng40@huawei.com Signed-off-by: Li Heng Signed-off-by: Martin K. Petersen

scsi: pmcraid: Replace dma_pool_malloc with dma_pool_zalloc

2020-04-24T22:21:15+00:00

Replace dma_pool_malloc with dma_pool_zalloc to make the code more concise in pmcraid_allocate_control_blocks() function. Link: https://lore.kernel.org/r/1587197241-274646-1-git-send-email-wubo40@huawei.com Signed-off-by: Wu Bo Signed-off-by: Martin K. Petersen

compat_ioctl: move more drivers to compat_ptr_ioctl

2019-10-23T15:23:44+00:00

The .ioctl and .compat_ioctl file operations have the same prototype so they can both point to the same function, which works great almost all the time when all the commands are compatible. One exception is the s390 architecture, where a compat pointer is only 31 bit wide, and converting it into a 64-bit pointer requires calling compat_ptr(). Most drivers here will never run in s390, but since we now have a generic helper for it, it's easy enough to use it consistently. I double-checked all these drivers to ensure that all ioctl arguments are used as pointers or are ignored, but are not interpreted as integer values. Acked-by: Jason Gunthorpe Acked-by: Daniel Vetter Acked-by: Mauro Carvalho Chehab Acked-by: Greg Kroah-Hartman Acked-by: David Sterba Acked-by: Darren Hart (VMware) Acked-by: Jonathan Cameron Acked-by: Bjorn Andersson Acked-by: Dan Williams Signed-off-by: Arnd Bergmann

scsi: pmcraid: Fix a typo - pcmraid --> pmcraid

2019-08-13T01:57:13+00:00

This should be 'pmcraid', not 'pcmraid' Signed-off-by: Christophe JAILLET Signed-off-by: Martin K. Petersen

Merge tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2019-07-11T22:17:41+00:00

Pull SCSI scatter-gather list updates from James Bottomley: "This topic branch covers a fundamental change in how our sg lists are allocated to make mq more efficient by reducing the size of the preallocated sg list. This necessitates a large number of driver changes because the previous guarantee that if a driver specified SG_ALL as the size of its scatter list, it would get a non-chained list and didn't need to bother with scatterlist iterators is now broken and every driver *must* use scatterlist iterators. This was broken out as a separate topic because we need to convert all the drivers before pulling the trigger and unconverted drivers kept being found, necessitating a rebase" * tag 'scsi-sg' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits) scsi: core: don't preallocate small SGL in case of NO_SG_CHAIN scsi: lib/sg_pool.c: clear 'first_chunk' in case of no preallocation scsi: core: avoid preallocating big SGL for data scsi: core: avoid preallocating big SGL for protection information scsi: lib/sg_pool.c: improve APIs for allocating sg pool scsi: esp: use sg helper to iterate over scatterlist scsi: NCR5380: use sg helper to iterate over scatterlist scsi: wd33c93: use sg helper to iterate over scatterlist scsi: ppa: use sg helper to iterate over scatterlist scsi: pcmcia: nsp_cs: use sg helper to iterate over scatterlist scsi: imm: use sg helper to iterate over scatterlist scsi: aha152x: use sg helper to iterate over scatterlist scsi: s390: zfcp_fc: use sg helper to iterate over scatterlist scsi: staging: unisys: visorhba: use sg helper to iterate over scatterlist scsi: usb: image: microtek: use sg helper to iterate over scatterlist scsi: pmcraid: use sg helper to iterate over scatterlist scsi: ipr: use sg helper to iterate over scatterlist scsi: mvumi: use sg helper to iterate over scatterlist scsi: lpfc: use sg helper to iterate over scatterlist scsi: advansys: use sg helper to iterate over scatterlist ...

scsi: pmcraid: use sg helper to iterate over scatterlist

2019-06-20T19:21:32+00:00

Unlike the legacy I/O path, scsi-mq preallocates a large array to hold the scatterlist for each request. This static allocation can consume substantial amounts of memory on modern controllers which support a large number of concurrently outstanding requests. To facilitate a switch to a smaller static allocation combined with a dynamic allocation for requests that need it, we need to make sure all SCSI drivers handle chained scatterlists correctly. Convert remaining drivers that directly dereference the scatterlist array to using the iterator functions. [mkp: clarified commit message] Reviewed-by: Christoph Hellwig Reviewed-by: Bart Van Assche Signed-off-by: Ming Lei Signed-off-by: Martin K. Petersen

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156

2019-05-30T18:26:35+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Reviewed-by: Richard Fontana Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman