kernel/linux.git/drivers/scsi/mac_esp.c, branch v6.18.21

scsi: Switch back to struct platform_driver::remove()

2024-11-07T01:45:25+00:00

After commit 0edb555a65d1 ("platform: Make platform_driver::remove() return void") .remove() is (again) the right callback to implement for platform drivers. Convert all platform drivers below drivers/scsi to use .remove(), with the eventual goal to drop struct platform_driver::remove_new(). As .remove() and .remove_new() have the same prototypes, conversion is done by just changing the structure member name in the driver initializer. On the way do a few whitespace changes to make indention consistent. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20241028080754.429191-2-u.kleine-koenig@baylibre.com Signed-off-by: Martin K. Petersen

scsi: mac_esp: Convert to platform remove callback returning void

2023-12-06T02:51:37+00:00

The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). In the error path emit an error message replacing the (less useful) message by the core. Apart from the improved error message there is no change in behaviour. Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/9013c84059b8ccd6a5c8305aa35cfdfa314ba74c.1701619134.git.u.kleine-koenig@pengutronix.de Signed-off-by: Martin K. Petersen

scsi: esp_scsi: Declare SCSI host template const

2023-03-24T23:19:22+00:00

Make it explicit that the SCSI host template is not modified. Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230322195515.1267197-35-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: mac_esp: Use module_platform_driver to simplify the code

2020-10-03T01:52:53+00:00

Use module_platform_driver() to eliminate boilerplate code. Link: https://lore.kernel.org/r/20200914065403.3726462-1-liushixin2@huawei.com Signed-off-by: Liu Shixin Signed-off-by: Martin K. Petersen

treewide: Add SPDX license identifier for more missed files

2019-05-21T08:50:45+00:00

Add SPDX license identifiers to all files which: - Have no license information of any form - Have MODULE_LICENCE("GPL*") inside which was used in the initial scan/conversion to ignore the file These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner Signed-off-by: Greg Kroah-Hartman

scsi: remove the use_clustering flag

2018-12-19T04:19:21+00:00

The same effects can be achieved by setting the dma_boundary to PAGE_SIZE - 1 and the max_segment_size to PAGE_SIZE, so shift those settings into the drivers. Note that in many cases the setting might be bogus, but this keeps the status quo. [mkp: fix myrs and myrb] Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: esp_scsi: De-duplicate PIO routines

2018-10-18T01:38:20+00:00

As a temporary measure, the code to implement PIO transfers was duplicated in zorro_esp and mac_esp. Now that it has stabilized move the common code into the core driver but don't build it unless needed. This replaces the inline assembler with more portable writesb() calls. Optimizing the m68k writesb() implementation is a separate patch. [mkp: applied by hand] Signed-off-by: Finn Thain Tested-by: Stan Johnson Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: Track residual for PIO transfers

2018-10-18T01:34:20+00:00

If a target disconnects during a PIO data transfer the command may fail when the target reconnects: scsi host1: DMA length is zero! scsi host1: cur adr[04380000] len[00000000] The scsi bus is then reset. This happens because the residual reached zero before the transfer was completed. The usual residual calculation relies on the Transfer Count registers. That works for DMA transfers but not for PIO transfers. Fix the problem by storing the PIO transfer residual and using that to correctly calculate bytes_sent. Fixes: 6fe07aaffbf0 ("[SCSI] m68k: new mac_esp scsi driver") Tested-by: Stan Johnson Signed-off-by: Finn Thain Tested-by: Michael Schmitz Signed-off-by: Martin K. Petersen

scsi: esp_scsi: move dma mapping into the core code

2018-10-16T03:00:38+00:00

Except for the mac_esp driver, which uses PIO or pseudo DMA, all drivers share the same dma mapping calls. Move the dma mapping into the core code using the scsi_dma_map / scsi_dma_unmap helpers, with a special identify mapping variant triggered off a new ESP_FLAG_NO_DMA_MAP flag for mac_esp. Signed-off-by: Christoph Hellwig Tested-by: Finn Thain Signed-off-by: Martin K. Petersen

scsi: esp_scsi: remove the dev argument to scsi_esp_register

2018-10-16T03:00:38+00:00

We can simplify use esp->dev now. Signed-off-by: Christoph Hellwig Tested-by: Finn Thain Signed-off-by: Martin K. Petersen