kernel/linux.git/drivers/scsi/lpfc, branch v6.18.22

scsi: lpfc: Properly set WC for DPP mapping

2026-03-12T11:09:09+00:00

[ Upstream commit bffda93a51b40afd67c11bf558dc5aae83ca0943 ] Using set_memory_wc() to enable write-combining for the DPP portion of the MMIO mapping is wrong as set_memory_*() is meant to operate on RAM only, not MMIO mappings. In fact, as used currently triggers a BUG_ON() with enabled CONFIG_DEBUG_VIRTUAL. Simply map the DPP region separately and in addition to the already existing mappings, avoiding any possible negative side effects for these. Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4") Signed-off-by: Mathias Krause Signed-off-by: Justin Tee Reviewed-by: Mathias Krause Link: https://patch.msgid.link/20260212192327.141104-1-justintee8345@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

treewide: Drop pci_save_state() after pci_restore_state()

2026-02-11T12:41:45+00:00

commit 383d89699c5028de510a6667f674ed38585f77fc upstream. In 2009, commit c82f63e411f1 ("PCI: check saved state before restore") changed the behavior of pci_restore_state() such that it became necessary to call pci_save_state() afterwards, lest recovery from subsequent PCI errors fails. The commit has just been reverted and so all the pci_save_state() after pci_restore_state() calls that have accumulated in the tree are now superfluous. Drop them. Two drivers chose a different approach to achieve the same result: drivers/scsi/ipr.c and drivers/net/ethernet/intel/e1000e/netdev.c set the pci_dev's "state_saved" flag to true before calling pci_restore_state(). Drop this as well. Signed-off-by: Lukas Wunner Signed-off-by: Bjorn Helgaas Acked-by: Dave Jiang Acked-by: Giovanni Cabiddu # qat Link: https://patch.msgid.link/c2b28cc4defa1b743cf1dedee23c455be98b397a.1760274044.git.lukas@wunner.de Cc: Mario Limonciello Signed-off-by: Greg Kroah-Hartman

scsi: lpfc: Fix reusing an ndlp that is marked NLP_DROPPED during FLOGI

2026-01-02T11:57:00+00:00

[ Upstream commit 07caedc6a3887938813727beafea40f07c497705 ] It's possible for an unstable link to repeatedly bounce allowing a FLOGI retry, but then bounce again forcing an abort of the FLOGI. Ensure that the initial reference count on the FLOGI ndlp is restored in this faulty link scenario. Signed-off-by: Justin Tee Link: https://patch.msgid.link/20251106224639.139176-8-justintee8345@gmail.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2025-10-06T17:41:03+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that take config space accessor functions. Implement pci_find_capability(), pci_find_ext_capability(), and dwc, dwc endpoint, and cadence capability search interfaces with them (Hans Zhang) - Leave parent unit address 0 in 'interrupt-map' so that when we build devicetree nodes to describe PCI functions that contain multiple peripherals, we can build this property even when interrupt controllers lack 'reg' properties (Lorenzo Pieralisi) - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read Request Size to 128B to avoid a performance issue (Ilpo Järvinen) - Add sysfs 'serial_number' file to expose the Device Serial Number (Matthew Wood) - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das) Resource management: - Align m68k pcibios_enable_device() with other arches (Ilpo Järvinen) - Remove sparc pcibios_enable_device() implementations that don't do anything beyond what pci_enable_resources() does (Ilpo Järvinen) - Remove mips pcibios_enable_resources() and use pci_enable_resources() instead (Ilpo Järvinen) - Clean up bridge window sizing and assignment (Ilpo Järvinen), including: - Leave non-claimed bridge windows disabled - Enable bridges even if a window wasn't assigned because not all windows are required by downstream devices - Preserve bridge window type when releasing the resource, since the type is needed for reassignment - Consolidate selection of bridge windows into two new interfaces, pbus_select_window() and pbus_select_window_for_type(), so this is done consistently - Compute bridge window start and end earlier to avoid logging stale information MSI: - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol Vives) Error handling: - Align AER with EEH by allowing drivers to request a Bus Reset on Non-Fatal Errors (in addition to the reset on Fatal Errors that we already do) (Lukas Wunner) - If error recovery fails, emit FAILED_RECOVERY uevents for the devices, not for the bridge leading to them. This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner) - Align AER with EEH by calling err_handler.error_detected() callbacks to notify drivers if error recovery fails (Lukas Wunner) - Align AER with EEH by restoring device error_state to pci_channel_io_normal before the err_handler.slot_reset() callback. This is earlier than before the err_handler.resume() callback (Lukas Wunner) - Emit a BEGIN_RECOVERY uevent when driver's err_handler.error_detected() requests a reset, as well as when it says recovery is complete or can be done without a reset (Niklas Schnelle) - Align s390 with AER and EEH by emitting uevents during error recovery (Niklas Schnelle) - Align EEH with AER and s390 by emitting BEGIN_RECOVERY, SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the result of err_handler.error_detected() (Niklas Schnelle) - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES error information identifies a device without an AER Capability (Breno Leitao) - Update error decoding and TLP Log printing for new errors in current PCIe base spec (Lukas Wunner) - Update error recovery documentation to match the current code and use consistent nomenclature (Lukas Wunner) ASPM: - Enable all ClockPM and ASPM states for devicetree platforms, since there's typically no firmware that enables ASPM This is a risky change that may uncover hardware or configuration defects at boot-time rather than when users enable ASPM via sysfs later. Booting with "pcie_aspm=off" prevents this enabling (Manivannan Sadhasivam) - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam) Power management: - If a device has already been disconnected, e.g., by a hotplug removal, don't bother trying to resume it to D0 when detaching the driver. This avoids annoying "Unable to change power state from D3cold to D0" messages (Mario Limonciello) - Ensure devices are powered up before config reads for 'max_link_width', 'current_link_speed', 'current_link_width', 'secondary_bus_number', and 'subordinate_bus_number' sysfs files. This prevents using invalid data (~0) in drivers or lspci and, depending on how the PCIe controller reports errors, may avoid error interrupts or crashes (Brian Norris) Virtualization: - Add rescan/remove locking when enabling/disabling SR-IOV, which avoids list corruption on s390, where disabling SR-IOV also generates hotplug events (Niklas Schnelle) Peer-to-peer DMA: - Free struct p2p_pgmap, not a member within it, in the pci_p2pdma_add_resource() error path (Sungho Kim) Endpoint framework: - Document sysfs interface for BAR assignment of vNTB endpoint functions (Jerome Brunet) - Fix array underflow in endpoint BAR test case (Dan Carpenter) - Skip endpoint IRQ test if the IRQ is out of range to avoid false errors (Christian Bruel) - Fix endpoint test case for controllers with fixed-size BARs smaller than requested by the test (Marek Vasut) - Restore inbound translation when disabling doorbell so the endpoint doorbell test case can be run more than once (Niklas Cassel) - Avoid a NULL pointer dereference when releasing DMA channels in endpoint DMA test case (Shin'ichiro Kawasaki) - Convert tegra194 interrupt number to MSI vector to fix endpoint Kselftest MSI_TEST test case (Niklas Cassel) - Reset tegra194 BARs when running in endpoint mode so the BAR tests don't overwrite the ATU settings in BAR4 (Niklas Cassel) - Handle errors in tegra194 BPMP transactions so we don't mistakenly skip future PERST# assertion (Vidya Sagar) AMD MDB PCIe controller driver: - Update DT binding example to separate PERST# to a Root Port stanza to make multiple Root Ports possible in the future (Sai Krishna Musham) - Add driver support for PERST# being described in a Root Port stanza, falling back to the host bridge if not found there (Sai Krishna Musham) Freescale i.MX6 PCIe controller driver: - Enable the 3.3V Vaux supply if available so devices can request wakeup with either Beacon or WAKE# (Richard Zhu) MediaTek PCIe Gen3 controller driver: - Add optional sys clock ready time setting to avoid sys_clk_rdy signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno) - Add DT binding and driver support for MT6991 and MT8196 (AngeloGioacchino Del Regno) NVIDIA Tegra PCIe controller driver: - When asserting PERST#, disable the controller instead of mistakenly disabling the PLL twice (Nagarjuna Kristam) - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) Qualcomm PCIe controller driver: - Select PCI Power Control Slot driver so slot voltage rails can be turned on/off if described in Root Port devicetree node (Qiang Yu) - Parse only PCI bridge child nodes in devicetree, skipping unrelated nodes such as OPP (Operating Performance Points), which caused probe failures (Krishna Chaitanya Chundru) - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang) - Consolidate Root Port 'phy' and 'reset' properties in struct qcom_pcie_port, regardless of whether we got them from the Root Port node or the host bridge node (Manivannan Sadhasivam) - Fetch and map the ELBI register space in the DWC core rather than in each driver individually (Krishna Chaitanya Chundru) - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG Shift Feature' and use this in the qcom driver (Krishna Chaitanya Chundru) - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya Chundru) - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm Glymur, which is compatible with X1E80100 but doesn't have the cnoc_sf_axi clock (Qiang Yu) Renesas R-Car PCIe controller driver: - Fix a typo that prevented correct PHY initialization (Marek Vasut) - Add a missing 1ms delay after PWR reset assertion as required by the V4H manual (Marek Vasut) - Assure reset has completed before DBI access to avoid SError (Marek Vasut) - Fix inverted PHY initialization check, which sometimes led to timeouts and failure to start the controller (Marek Vasut) - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a regression when converting to msi_create_parent_irq_domain() (Claudiu Beznea) - Drop the spinlock protecting the PMSR register - it's no longer required since pci_lock already serializes accesses (Marek Vasut) - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock nesting error (Marek Vasut) SOPHGO PCIe controller driver: - Check for existence of struct cdns_pcie.ops before using it to allow Cadence drivers that don't need to supply ops (Chen Wang) - Add DT binding and driver for the SOPHGO SG2042 PCIe controller (Chen Wang) STMicroelectronics STM32MP25 PCIe controller driver: - Update pinctrl documentation of initial states and use in runtime suspend/resume (Christian Bruel) - Add pinctrl_pm_select_init_state() for use by stm32 driver, which needs it during resume (Christian Bruel) - Add devicetree bindings and drivers for the STMicroelectronics STM32MP25 in host and endpoint modes (Christian Bruel) Synopsys DesignWare PCIe controller driver: - Add support for x16 in devicetree 'num-lanes' property (Konrad Dybcio) - Verify that if DT specifies a single IRQ for all eDMA channels, it is named 'dma' (Niklas Cassel) TI J721E PCIe driver: - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth Vadapalli) - Power controller off before configuring the glue layer so the controller latches the correct values on power-on (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver exits with error (Siddharth Vadapalli) - Add Peripheral Virtualization Unit (PVU), which restricts DMA from PCIe devices to specific regions of host memory, to the ti,am65 binding (Jan Kiszka) Xilinx NWL PCIe controller driver: - Clear bootloader E_ECAM_CONTROL before merging in the new driver value to avoid writing invalid values (Jani Nurminen)" * tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits) PCI/AER: Avoid NULL pointer dereference in aer_ratelimit() MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25 dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings PCI: stm32: Add PCIe host support for STM32MP25 PCI: xilinx-nwl: Fix ECAM programming PCI: j721e: Fix incorrect error message in probe() PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller PCI: dwc: Support 16-lane operation PCI: Add lockdep assertion in pci_stop_and_remove_bus_device() PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0() PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock PCI: rcar-gen4: Fix inverted break condition in PHY initialization PCI: rcar-gen4: Assure reset occurs before DBI access PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion PCI: Set up bridge resources earlier PCI: rcar-host: Drop PMSR spinlock ...

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2025-10-04T02:17:48+00:00

Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus assorted cleanups and fixes. The only core update is to sd.c and is mostly cosmetic" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits) scsi: MAINTAINERS: Update FC element owners scsi: mpt3sas: Update driver version to 54.100.00.00 scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate scsi: ufs: dt-bindings: Document gear and rate limit properties scsi: ufs: core: Fix data race in CPU latency PM QoS request handling scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() scsi: storvsc: Remove redundant ternary operators scsi: ufs: core: Change MCQ interrupt enable flow scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() scsi: lpfc: Copyright updates for 14.4.0.11 patches scsi: lpfc: Update lpfc version to 14.4.0.11 scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int scsi: lpfc: Clean up extraneous phba dentries ...

Merge patch series "Update lpfc to revision 14.4.0.11"

2025-09-17T02:20:57+00:00

Justin Tee says: Update lpfc to revision 14.4.0.11 This patch set contains clean up of unused members in various structs, bug fixes related to discovery and resource allocation, and updates to handling of debugfs entries. The patches were cut against Martin's 6.18/scsi-queue tree. Signed-off-by: Martin K. Petersen

scsi: lpfc: Copyright updates for 14.4.0.11 patches

2025-09-17T02:20:00+00:00

Update copyrights to 2025 for files modified in the 14.4.0.11 patch set. Signed-off-by: Justin Tee Message-ID: <20250915180811.137530-15-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen

scsi: lpfc: Update lpfc version to 14.4.0.11

2025-09-17T02:20:00+00:00

Update lpfc version to 14.4.0.11 Signed-off-by: Justin Tee Message-ID: <20250915180811.137530-14-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen

scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int

2025-09-17T02:20:00+00:00

Atomicity is not necessary for debugfs directory accounting because vport deletion and creation is already serialized. Creation has always been serialized through sysfs. Deletion is serialized via walking the lpfc_create_vport_work_array and calling fc_vport_terminate one-by-one for each NPIV port. Reported-by: Al Viro Closes: https://lore.kernel.org/linux-fsdevel/20250702212917.GK3406663@ZenIV/ Signed-off-by: Justin Tee Message-ID: <20250915180811.137530-13-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen

scsi: lpfc: Clean up extraneous phba dentries

2025-09-17T02:20:00+00:00

Because debugfs_remove recursively removes debugfs entries, the lpfc_debugfs_terminate routine is updated to remove only the parent/root debugfs directories. As such, there no longer is a need to keep track of each individual debugfs entry so clean up the unused phba dentries. Reported-by: Al Viro Closes: https://lore.kernel.org/linux-fsdevel/20250702212917.GK3406663@ZenIV/ Signed-off-by: Justin Tee Message-ID: <20250915180811.137530-12-justintee8345@gmail.com> Signed-off-by: Martin K. Petersen