kernel/linux.git/drivers/scsi/lpfc, branch v5.18.2

scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE

2022-05-11T01:44:04+00:00

Garbage FCoE CT frames are transmitted on the wire because of bad DMA ptr addresses filled in the GEN_REQ_WQE. The __lpfc_sli_prep_gen_req_s4() routine is using the wrong buffer for the payload address. Change the DMA buffer assignment from the bmp buffer to the bpl buffer. Link: https://lore.kernel.org/r/20220506205548.61644-1-jsmart2021@gmail.com Fixes: 61910d6a5243 ("scsi: lpfc: SLI path split: Refactor CT paths") Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix split code for FLOGI on FCoE

2022-05-11T01:43:21+00:00

The refactoring code converted context information from SLI-3 to SLI-4. The conversion for the SLI-4 bit field tried to use the old (hacky) SLI3 high/low bit settings. Needless to say, it was incorrect. Explicitly set the context field to type FCFI and set it in the wqe. SLI-4 is now a proper bit field so no need for the shifting/anding. Link: https://lore.kernel.org/r/20220506205528.61590-1-jsmart2021@gmail.com Fixes: 6831ce129f19 ("scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path") Co-developed-by: Dick Kennedy Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

Merge branch '5.18/scsi-queue' into 5.18/scsi-fixes

2022-04-07T01:46:54+00:00

Pull the remaining commits from 5.18/scsi-queue into fixes. Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix locking for lpfc_sli_iocbq_lookup()

2022-03-30T03:22:16+00:00

The rules changed for lpfc_sli_iocbq_lookup() vs locking. Prior, the routine properly took out the lock. In newly refactored code, the locks must be held when calling the routine. Fix lpfc_sli_process_sol_iocb() to take the locks before calling the routine. Fix lpfc_sli_handle_fast_ring_event() to not release the locks to call the routine. Link: https://lore.kernel.org/r/20220323205545.81814-3-jsmart2021@gmail.com Fixes: 1b64aa9eae28 ("scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4") Co-developed-by: Dick Kennedy Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix broken SLI4 abort path

2022-03-30T03:22:15+00:00

There was a merge error in ther 14.2.0.0 patches that resulted in the SLI4 path using the SLI3 issue_abort_iotag() routine. This resulted in txcmplq corruption. Fix to use the SLI4 routine when SLI4. Link: https://lore.kernel.org/r/20220323205545.81814-2-jsmart2021@gmail.com Fixes: 31a59f75702f ("scsi: lpfc: SLI path split: Refactor Abort paths") Cc: # v5.2+ Co-developed-by: Dick Kennedy Signed-off-by: Dick Kennedy Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Update lpfc version to 14.2.0.1

2022-03-30T03:19:38+00:00

Update lpfc version to 14.2.0.1 Link: https://lore.kernel.org/r/20220317032737.45308-5-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix queue failures when recovering from PCI parity error

2022-03-30T03:19:38+00:00

When recovering from a pci-parity error the driver is failing to re-create queues, causing recovery to fail. Looking deeper, it was found that the interrupt vector count allocated on the recovery was fewer than the vectors originally allocated. This disparity resulted in CPU map entries with stale information. When the driver tries to re-create the queues, it attempts to use the stale information which indicates an eq/interrupt vector that was no longer created. Fix by clearng the cpup map array before enabling and requesting the IRQs in the lpfc_sli_reset_slot_s4 routine(). Link: https://lore.kernel.org/r/20220317032737.45308-4-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Fix unload hang after back to back PCI EEH faults

2022-03-30T03:19:38+00:00

When injecting EEH errors the port is getting hung up waiting on the node list to empty, message number 0233. The driver is stuck at this point and also can't unload. The driver makes transport remoteport delete calls which try to abort I/O's, but the EEH daemon has already called the driver to detach and the detachment has set the global FC_UNLOADING flag. There are several code paths that will avoid I/O cleanup if the FC_UNLOADING flag is set, resulting in transports waiting for I/O while the driver is waiting on transports to clean up. Additionally, during study of the list, a locking issue was found in lpfc_sli_abort_iocb_ring that could corrupt the list. A special case was added to the lpfc_cleanup() routine to call lpfc_sli_flush_rings() if the driver is FC_UNLOADING and if the pci-slot is offline (e.g. EEH). The SLI4 part of lpfc_sli_abort_iocb_ring() is changed to use the ring_lock. Also added code to cancel the I/Os if the pci-slot is offline and added checks and returns for the FC_UNLOADING and HBA_IOQ_FLUSH flags to prevent trying to send an I/O that we cannot handle. Link: https://lore.kernel.org/r/20220317032737.45308-3-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

scsi: lpfc: Improve PCI EEH Error and Recovery Handling

2022-03-30T03:19:37+00:00

Following EEH errors, the driver can crash or hang when deleting the localport or when attempting to unload. The EEH handlers in the driver did not notify the NVMe-FC transport before tearing the driver down. This was delayed until the resume steps. This worked for SCSI because lpfc_block_scsi() would notify the scsi_fc_transport that the target was not available but it would not clean up all the references to the ndlp. The SLI3 prep for dev reset handler did the lpfc_offline_prep() and lpfc_offline() calls to get the port stopped before restarting. The SLI4 version of the prep for dev reset just destroyed the queues and did not stop NVMe from continuing. Also because the port was not really stopped the localport destroy would hang because the transport was still waiting for I/O. Additionally, a devloss tmo can fire and post events to a stopped worker thread creating another hang condition. lpfc_sli4_prep_dev_for_reset() is modified to call lpfc_offline_prep() and lpfc_offline() rather than just lpfc_scsi_dev_block() to ensure both SCSI and NVMe transports are notified to block I/O to the driver. Logic is added to devloss handler and worker thread to clean up ndlp references and quiesce appropriately. Link: https://lore.kernel.org/r/20220317032737.45308-2-jsmart2021@gmail.com Co-developed-by: Justin Tee Signed-off-by: Justin Tee Signed-off-by: James Smart Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2022-03-25T02:37:53+00:00

Pull SCSI updates from James Bottomley: "This series consists of the usual driver updates (qla2xxx, pm8001, libsas, smartpqi, scsi_debug, lpfc, iscsi, mpi3mr) plus minor updates and bug fixes. The high blast radius core update is the removal of write same, which affects block and several non-SCSI devices. The other big change, which is more local, is the removal of the SCSI pointer" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (281 commits) scsi: scsi_ioctl: Drop needless assignment in sg_io() scsi: bsg: Drop needless assignment in scsi_bsg_sg_io_fn() scsi: lpfc: Copyright updates for 14.2.0.0 patches scsi: lpfc: Update lpfc version to 14.2.0.0 scsi: lpfc: SLI path split: Refactor BSG paths scsi: lpfc: SLI path split: Refactor Abort paths scsi: lpfc: SLI path split: Refactor SCSI paths scsi: lpfc: SLI path split: Refactor CT paths scsi: lpfc: SLI path split: Refactor misc ELS paths scsi: lpfc: SLI path split: Refactor VMID paths scsi: lpfc: SLI path split: Refactor FDISC paths scsi: lpfc: SLI path split: Refactor LS_RJT paths scsi: lpfc: SLI path split: Refactor LS_ACC paths scsi: lpfc: SLI path split: Refactor the RSCN/SCR/RDF/EDC/FARPR paths scsi: lpfc: SLI path split: Refactor PLOGI/PRLI/ADISC/LOGO paths scsi: lpfc: SLI path split: Refactor base ELS paths and the FLOGI path scsi: lpfc: SLI path split: Introduce lpfc_prep_wqe scsi: lpfc: SLI path split: Refactor fast and slow paths to native SLI4 scsi: lpfc: SLI path split: Refactor lpfc_iocbq scsi: lpfc: Use kcalloc() ...