Linux kernel stable tree (mirror) https://git.radix-linux.su/kernel/linux.git/atom?h=linux-5.11.y 2021-04-21T11:13:23+00:00 2021-04-21T11:13:23+00:00 Jolly Shah jollys@google.com 2021-03-18T22:56:32+00:00 urn:sha1:ad7693165885918b524a8a721788aa5bf591ba72 commit 176ddd89171ddcf661862d90c5d257877f7326d6 upstream. When the cache_type for the SCSI device is changed, the SCSI layer issues a MODE_SELECT command. The caching mode details are communicated via a request buffer associated with the SCSI command with data direction set as DMA_TO_DEVICE (scsi_mode_select()). When this command reaches the libata layer, as a part of generic initial setup, libata layer sets up the scatterlist for the command using the SCSI command (ata_scsi_qc_new()). This command is then translated by the libata layer into ATA_CMD_SET_FEATURES (ata_scsi_mode_select_xlat()). The libata layer treats this as a non-data command (ata_mselect_caching()), since it only needs an ATA taskfile to pass the caching on/off information to the device. It does not need the scatterlist that has been setup, so it does not perform dma_map_sg() on the scatterlist (ata_qc_issue()). Unfortunately, when this command reaches the libsas layer (sas_ata_qc_issue()), libsas layer sees it as a non-data command with a scatterlist. It cannot extract the correct DMA length since the scatterlist has not been mapped with dma_map_sg() for a DMA operation. When this partially constructed SAS task reaches pm80xx LLDD, it results in the following warning: "pm80xx_chip_sata_req 6058: The sg list address start_addr=0x0000000000000000 data_len=0x0end_addr_high=0xffffffff end_addr_low=0xffffffff has crossed 4G boundary" Update libsas to handle ATA non-data commands separately so num_scatter and total_xfer_len remain 0. Link: https://lore.kernel.org/r/20210318225632.2481291-1-jollys@google.com Fixes: 53de092f47ff ("scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA") Tested-by: Luo Jiaxing <luojiaxing@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Jolly Shah <jollys@google.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> 2021-03-04T11:14:42+00:00 Ahmed S. Darwish a.darwish@linutronix.de 2021-01-18T10:09:39+00:00 urn:sha1:333d5eed1f44319ab26970d0a0129d7d1ddb2792 [ Upstream commit c2d0f1a65ab9fbabebb463bf36f50ea8f4633386 ] sas_alloc_event() uses in_interrupt() to decide which allocation should be used. The usage of in_interrupt() in drivers is phased out and Linus clearly requested that code which changes behaviour depending on context should either be separated or the context be conveyed in an argument passed by the caller, which usually knows the context. The in_interrupt() check is also only partially correct, because it fails to choose the correct code path when just preemption or interrupts are disabled. For example, as in the following call chain: mvsas/mv_sas.c: mvs_work_queue() [process context] spin_lock_irqsave(mvs_info::lock, ) -> libsas/sas_event.c: sas_notify_phy_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation -> libsas/sas_event.c: sas_notify_port_event() -> sas_alloc_event() -> in_interrupt() = false -> invalid GFP_KERNEL allocation Introduce sas_alloc_event_gfp(), sas_notify_port_event_gfp(), and sas_notify_phy_event_gfp(), which all behave like the non _gfp() variants but use a caller-passed GFP mask for allocations. For bisectability, all callers will be modified first to pass GFP context, then the non _gfp() libsas API variants will be modified to take a gfp_t by default. Link: https://lore.kernel.org/r/20210118100955.1761652-4-a.darwish@linutronix.de Fixes: 1c393b970e0f ("scsi: libsas: Use dynamic alloced work to avoid sas event lost") Cc: Jason Yan <yanaijie@huawei.com> Reviewed-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2021-03-04T11:14:42+00:00 John Garry john.garry@huawei.com 2021-01-18T10:09:38+00:00 urn:sha1:04d7a4e2f658b7dabc91ab590aa40e6e5dfb3483 [ Upstream commit 121181f3f839c29d8dd9fdc3cc9babbdc74227f8 ] LLDDs report events to libsas with .notify_port_event and .notify_phy_event callbacks. These callbacks are fixed and so there is no reason why the functions cannot be called directly, so do that. This neatens the code slightly, makes it more obvious, and reduces function pointer usage, which is generally a good thing. Downside is that there are 2x more symbol exports. [a.darwish@linutronix.de: Remove the now unused "sas_ha" local variables] Link: https://lore.kernel.org/r/20210118100955.1761652-3-a.darwish@linutronix.de Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Jack Wang <jinpu.wang@cloud.ionos.com> Signed-off-by: John Garry <john.garry@huawei.com> Signed-off-by: Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org> 2020-10-14T22:15:35+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-10-14T22:15:35+00:00 urn:sha1:55e0500eb5c0440a3d43074edbd8db3e95851b66 Pull SCSI updates from James Bottomley: "The usual driver updates (ufs, qla2xxx, tcmu, ibmvfc, lpfc, smartpqi, hisi_sas, qedi, qedf, mpt3sas) and minor bug fixes. There are only three core changes: adding sense codes, cleaning up noretry and adding an option for limitless retries" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (226 commits) scsi: hisi_sas: Recover PHY state according to the status before reset scsi: hisi_sas: Filter out new PHY up events during suspend scsi: hisi_sas: Add device link between SCSI devices and hisi_hba scsi: hisi_sas: Add check for methods _PS0 and _PR0 scsi: hisi_sas: Add controller runtime PM support for v3 hw scsi: hisi_sas: Switch to new framework to support suspend and resume scsi: hisi_sas: Use hisi_hba->cq_nvecs for calling calling synchronize_irq() scsi: qedf: Remove redundant assignment to variable 'rc' scsi: lpfc: Remove unneeded variable 'status' in lpfc_fcp_cpu_map_store() scsi: snic: Convert to use DEFINE_SEQ_ATTRIBUTE macro scsi: qla4xxx: Delete unneeded variable 'status' in qla4xxx_process_ddb_changed scsi: sun_esp: Use module_platform_driver to simplify the code scsi: sun3x_esp: Use module_platform_driver to simplify the code scsi: sni_53c710: Use module_platform_driver to simplify the code scsi: qlogicpti: Use module_platform_driver to simplify the code scsi: mac_esp: Use module_platform_driver to simplify the code scsi: jazz_esp: Use module_platform_driver to simplify the code scsi: mvumi: Fix error return in mvumi_io_attach() scsi: lpfc: Drop nodelist reference on error in lpfc_gen_req() scsi: be2iscsi: Fix a theoretical leak in beiscsi_create_eqs() ... 2020-09-23T00:26:08+00:00 Liu Shixin liushixin2@huawei.com 2020-09-21T13:45:58+00:00 urn:sha1:3d1a99e2b5400fd32ec647b290340b5ed091d3ae Simplify the return expression. Link: https://lore.kernel.org/r/20200921134558.3478922-1-liushixin2@huawei.com Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Liu Shixin <liushixin2@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2020-09-15T23:30:20+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-09-15T23:30:20+00:00 urn:sha1:9803ab172228d8509c72b34c703b9fe67cb94ddc Pull SCSI fix from James Bottomley: "Just one fix in libsas for a resource leak in an error path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: libsas: Fix error path in sas_notify_lldd_dev_found() 2020-09-10T01:25:02+00:00 Dan Carpenter dan.carpenter@oracle.com 2020-09-05T12:58:36+00:00 urn:sha1:244359c99fd90f1c61c3944f93250f8219435c75 In sas_notify_lldd_dev_found(), if we can't allocate the necessary resources, then it seems like the wrong thing to mark the device as found and to increment the reference count. None of the callers ever drop the reference in that situation. [mkp: tweaked commit desc based on feedback from John] Link: https://lore.kernel.org/r/20200905125836.GF183976@mwanda Fixes: 735f7d2fedf5 ("[SCSI] libsas: fix domain_device leak") Reviewed-by: Jason Yan <yanaijie@huawei.com> Acked-by: John Garry <john.garry@huawei.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2020-09-08T18:42:58+00:00 Linus Torvalds torvalds@linux-foundation.org 2020-09-08T18:42:58+00:00 urn:sha1:d6dc7e06826bd7bbb654b7a730db99e7020abbf6 Pull SCSI fixes from James Bottomley: "Eleven fixes, mostly in drivers or minor fixes in driver related infrastructure libraries (target, libfc and libsas). Most of the bugs fixed only show up under rare circumstances, the exception being the endianness problem in qla2xxx which is used as a device on some sparc systems" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: mpt3sas: Don't call disable_irq from IRQ poll handler scsi: megaraid_sas: Don't call disable_irq from process IRQ poll scsi: target: iscsi: Fix hang in iscsit_access_np() when getting tpg->np_login_sem scsi: libsas: Set data_dir as DMA_NONE if libata marks qc as NODATA scsi: target: iscsi: Fix data digest calculation scsi: lpfc: Update lpfc version to 12.8.0.4 scsi: lpfc: Extend the RDF FPIN Registration descriptor for additional events scsi: lpfc: Fix FLOGI/PLOGI receive race condition in pt2pt discovery scsi: lpfc: Fix setting IRQ affinity with an empty CPU mask scsi: qla2xxx: Fix regression on sparc64 scsi: libfc: Fix for double free() scsi: pm8001: Fix memleak in pm8001_exec_internal_task_abort 2020-09-02T01:45:23+00:00 Luo Jiaxing luojiaxing@huawei.com 2020-08-26T07:24:26+00:00 urn:sha1:53de092f47ff40e8d4d78d590d95819d391bf2e0 It was discovered that sdparm will fail when attempting to disable write cache on a SATA disk connected via libsas. In the ATA command set the write cache state is controlled through the SET FEATURES operation. This is roughly corresponds to MODE SELECT in SCSI and the latter command is what is used in the SCSI-ATA translation layer. A subtle difference is that a MODE SELECT carries data whereas SET FEATURES is defined as a non-data command in ATA. Set the DMA data direction to DMA_NONE if the requested ATA command is identified as non-data. [mkp: commit desc] Fixes: fa1c1e8f1ece ("[SCSI] Add SATA support to libsas") Link: https://lore.kernel.org/r/1598426666-54544-1-git-send-email-luojiaxing@huawei.com Reviewed-by: John Garry <john.garry@huawei.com> Reviewed-by: Jason Yan <yanaijie@huawei.com> Signed-off-by: Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> 2020-08-23T22:36:59+00:00 Gustavo A. R. Silva gustavoars@kernel.org 2020-08-23T22:36:59+00:00 urn:sha1:df561f6688fef775baa341a0f5d960becd248b11 Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>