kernel/linux.git/drivers/scsi/isci/init.c, branch v6.2.2

scsi: libsas: Delete lldd_clear_aca callback

2022-02-19T20:59:34+00:00

This callback is never called, so remove support. Link: https://lore.kernel.org/r/1645112566-115804-4-git-send-email-john.garry@huawei.com Tested-by: Yihang Li Tested-by: Damien Le Moal Reviewed-by: Jack Wang Reviewed-by: Christoph Hellwig Reviewed-by: Xiang Chen Signed-off-by: John Garry Signed-off-by: Martin K. Petersen

scsi: isci: Switch to attribute groups

2021-10-17T01:45:56+00:00

struct device supports attribute groups directly but does not support struct device_attribute directly. Hence switch to attribute groups. Link: https://lore.kernel.org/r/20211012233558.4066756-27-bvanassche@acm.org Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: libsas: Add LUN number check in .slave_alloc callback

2021-06-23T01:33:33+00:00

Offlining a SATA device connected to a hisi SAS controller and then scanning the host will result in detecting 255 non-existent devices: # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:2:0] disk SEAGATE ST600MM0006 B001 /dev/sdc # echo "offline" > /sys/block/sdb/device/state # echo "- - -" > /sys/class/scsi_host/host2/scan # lsscsi [2:0:0:0] disk ATA Samsung SSD 860 2B6Q /dev/sda [2:0:1:0] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdb [2:0:1:1] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdh ... [2:0:1:255] disk ATA WDC WD2003FYYS-3 1D01 /dev/sdjb After a REPORT LUN command issued to the offline device fails, the SCSI midlayer tries to do a sequential scan of all devices whose LUN number is not 0. However, SATA does not support LUN numbers at all. Introduce a generic sas_slave_alloc() handler which will return -ENXIO for SATA devices if the requested LUN number is larger than 0 and make libsas drivers use this function as their .slave_alloc callback. Link: https://lore.kernel.org/r/20210622034037.1467088-1-yuyufen@huawei.com Reported-by: Wu Bo Suggested-by: John Garry Reviewed-by: John Garry Reviewed-by: Jason Yan Signed-off-by: Yufen Yu Signed-off-by: Martin K. Petersen

scsi: isci: Don't use PCI helper functions

2020-11-11T04:08:36+00:00

PCI helper functions such as pci_enable/disable_device(), pci_save/restore_state(), pci_set_power_state(), etc. were used by the legacy framework to perform standard operations related to PCI PM. This driver is using the generic framework and thus calls for those functions should be dropped as those tasks are now performed by the PCI core. Link: https://lore.kernel.org/r/20201107100420.149521-1-vaibhavgupta40@gmail.com Acked-by: Artur Paszkiewicz Signed-off-by: Vaibhav Gupta Signed-off-by: Martin K. Petersen

scsi: isci: Make isci_host_attrs static

2020-09-16T01:28:40+00:00

This eliminates the following sparse warning: drivers/scsi/isci/init.c:145:25: warning: symbol 'isci_host_attrs' was not declared. Should it be static? Link: https://lore.kernel.org/r/20200912033741.142415-1-yanaijie@huawei.com Reported-by: Hulk Robot Signed-off-by: Jason Yan Signed-off-by: Martin K. Petersen

scsi: Wire up ata_scsi_dma_need_drain for SAS HBA drivers

2020-06-16T03:40:43+00:00

We need ata_scsi_dma_need_drain for all drivers wired up to drive ATAPI devices through libata. That also includes the SAS HBA drivers in addition to native libata HBA drivers. Link: https://lore.kernel.org/r/20200615064624.37317-3-hch@lst.de Fixes: cc97923a5bcc ("block: move dma drain handling to scsi") Reported-by: Michael Ellerman Tested-by: Michael Ellerman Acked-by: Jack Wang Acked-by: John Garry Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: iscsi: Use EFI GetVariable only when available

2020-02-23T20:59:42+00:00

Replace the EFI runtime services check with one that tells us whether EFI GetVariable() is implemented by the firmware. Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: linux-scsi@vger.kernel.org Signed-off-by: Ard Biesheuvel

compat_ioctl: scsi: handle HDIO commands from drivers

2020-01-03T08:42:52+00:00

The ata_sas_scsi_ioctl() function implements a number of HDIO_* commands for SCSI devices, it is used by all libata drivers as well as a few drivers that support SAS attached SATA drives. The only command that is not safe for compat ioctls here is HDIO_GET_32BIT. Change the implementation to check for in_compat_syscall() in order to do both cases correctly, and change all callers to use it as both native and compat callback pointers, including the indirect callers through sas_ioctl and ata_scsi_ioctl. Reviewed-by: Ben Hutchings Signed-off-by: Arnd Bergmann

scsi: isci: initialize shost fully before calling scsi_add_host()

2019-01-09T03:27:24+00:00

scsi_mq_setup_tags(), which is called by scsi_add_host(), calculates the command size to allocate based on the prot_capabilities. In the isci driver, scsi_host_set_prot() is called after scsi_add_host() so the command size gets calculated to be smaller than it needs to be. Eventually, scsi_mq_init_request() locates the 'prot_sdb' after the command assuming it was sized correctly and a buffer overrun may occur. However, seeing blk_mq_alloc_rqs() rounds up to the nearest cache line size, the mistake can go unnoticed. The bug was noticed after the struct request size was reduced by commit 9d037ad707ed ("block: remove req->timeout_list") Which likely reduced the allocated space for the request by an entire cache line, enough that the overflow could be hit and it caused a panic, on boot, at: RIP: 0010:t10_pi_complete+0x77/0x1c0 Call Trace: sd_done+0xf5/0x340 scsi_finish_command+0xc3/0x120 blk_done_softirq+0x83/0xb0 __do_softirq+0xa1/0x2e6 irq_exit+0xbc/0xd0 call_function_single_interrupt+0xf/0x20 sd_done() would call scsi_prot_sg_count() which reads the number of entities in 'prot_sdb', but seeing 'prot_sdb' is located after the end of the allocated space it reads a garbage number and erroneously calls t10_pi_complete(). To prevent this, the calls to scsi_host_set_prot() are moved into isci_host_alloc() before the call to scsi_add_host(). Out of caution, also move the similar call to scsi_host_set_guard(). Fixes: 3d2d75254915 ("[SCSI] isci: T10 DIF support") Link: http://lkml.kernel.org/r/da851333-eadd-163a-8c78-e1f4ec5ec857@deltatee.com Signed-off-by: Logan Gunthorpe Cc: Intel SCU Linux support Cc: Artur Paszkiewicz Cc: "James E.J. Bottomley" Cc: "Martin K. Petersen" Cc: Christoph Hellwig Cc: Jens Axboe Cc: Jeff Moyer Reviewed-by: Jeff Moyer Reviewed-by: Jens Axboe Signed-off-by: Martin K. Petersen

scsi: flip the default on use_clustering

2018-12-19T04:13:12+00:00

Most SCSI drivers want to enable "clustering", that is merging of segments so that they might span more than a single page. Remove the ENABLE_CLUSTERING define, and require drivers to explicitly set DISABLE_CLUSTERING to disable this feature. Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen