kernel/linux.git/drivers/scsi/ipr.c, branch v6.12.80

scsi: ipr: Enable/disable IRQD_NO_BALANCING during reset

2026-01-17T15:31:20+00:00

[ Upstream commit 6ac3484fb13b2fc7f31cfc7f56093e7d0ce646a5 ] A dynamic remove/add storage adapter test hits EEH on PowerPC: EEH: [c00000000004f75c] __eeh_send_failure_event+0x7c/0x160 EEH: [c000000000048444] eeh_dev_check_failure.part.0+0x254/0x650 EEH: [c008000001650678] eeh_readl+0x60/0x90 [ipr] EEH: [c00800000166746c] ipr_cancel_op+0x2b8/0x524 [ipr] EEH: [c008000001656524] ipr_eh_abort+0x6c/0x130 [ipr] EEH: [c000000000ab0d20] scmd_eh_abort_handler+0x140/0x440 EEH: [c00000000017e558] process_one_work+0x298/0x590 EEH: [c00000000017eef8] worker_thread+0xa8/0x620 EEH: [c00000000018be34] kthread+0x124/0x130 EEH: [c00000000000cd64] ret_from_kernel_thread+0x5c/0x64 A PCIe bus trace reveals that a vector of MSI-X is cleared to 0 by irqbalance daemon. If we disable irqbalance daemon, we won't see the issue. With debug enabled in ipr driver: [ 44.103071] ipr: Entering __ipr_remove [ 44.103083] ipr: Entering ipr_initiate_ioa_bringdown [ 44.103091] ipr: Entering ipr_reset_shutdown_ioa [ 44.103099] ipr: Leaving ipr_reset_shutdown_ioa [ 44.103105] ipr: Leaving ipr_initiate_ioa_bringdown [ 44.149918] ipr: Entering ipr_reset_ucode_download [ 44.149935] ipr: Entering ipr_reset_alert [ 44.150032] ipr: Entering ipr_reset_start_timer [ 44.150038] ipr: Leaving ipr_reset_alert [ 44.244343] scsi 1:2:3:0: alua: Detached [ 44.254300] ipr: Entering ipr_reset_start_bist [ 44.254320] ipr: Entering ipr_reset_start_timer [ 44.254325] ipr: Leaving ipr_reset_start_bist [ 44.364329] scsi 1:2:4:0: alua: Detached [ 45.134341] scsi 1:2:5:0: alua: Detached [ 45.860949] ipr: Entering ipr_reset_shutdown_ioa [ 45.860962] ipr: Leaving ipr_reset_shutdown_ioa [ 45.860966] ipr: Entering ipr_reset_alert [ 45.861028] ipr: Entering ipr_reset_start_timer [ 45.861035] ipr: Leaving ipr_reset_alert [ 45.964302] ipr: Entering ipr_reset_start_bist [ 45.964309] ipr: Entering ipr_reset_start_timer [ 45.964313] ipr: Leaving ipr_reset_start_bist [ 46.264301] ipr: Entering ipr_reset_bist_done [ 46.264309] ipr: Leaving ipr_reset_bist_done During adapter reset, ipr device driver blocks config space access but can't block MMIO access for MSI-X entries. There is very small window: irqbalance daemon kicks in during adapter reset before ipr driver calls pci_restore_state(pdev) to restore MSI-X table. irqbalance daemon reads back all 0 for that MSI-X vector in __pci_read_msi_msg(). irqbalance daemon: msi_domain_set_affinity() ->irq_chip_set_affinity_patent() ->xive_irq_set_affinity() ->irq_chip_compose_msi_msg() ->pseries_msi_compose_msg() ->__pci_read_msi_msg(): read all 0 since didn't call pci_restore_state ->irq_chip_write_msi_msg() -> pci_write_msg_msi(): write 0 to the msix vector entry When ipr driver calls pci_restore_state(pdev) in ipr_reset_restore_cfg_space(), the MSI-X vector entry has been cleared by irqbalance daemon in pci_write_msg_msix(). pci_restore_state() ->__pci_restore_msix_state() Below is the MSI-X table for ipr adapter after irqbalance daemon kicked in during adapter reset: Dump MSIx table: index=0 address_lo=c800 address_hi=10000000 msg_data=0 Dump MSIx table: index=1 address_lo=c810 address_hi=10000000 msg_data=0 Dump MSIx table: index=2 address_lo=c820 address_hi=10000000 msg_data=0 Dump MSIx table: index=3 address_lo=c830 address_hi=10000000 msg_data=0 Dump MSIx table: index=4 address_lo=c840 address_hi=10000000 msg_data=0 Dump MSIx table: index=5 address_lo=c850 address_hi=10000000 msg_data=0 Dump MSIx table: index=6 address_lo=c860 address_hi=10000000 msg_data=0 Dump MSIx table: index=7 address_lo=c870 address_hi=10000000 msg_data=0 Dump MSIx table: index=8 address_lo=0 address_hi=0 msg_data=0 ---------> Hit EEH since msix vector of index=8 are 0 Dump MSIx table: index=9 address_lo=c890 address_hi=10000000 msg_data=0 Dump MSIx table: index=10 address_lo=c8a0 address_hi=10000000 msg_data=0 Dump MSIx table: index=11 address_lo=c8b0 address_hi=10000000 msg_data=0 Dump MSIx table: index=12 address_lo=c8c0 address_hi=10000000 msg_data=0 Dump MSIx table: index=13 address_lo=c8d0 address_hi=10000000 msg_data=0 Dump MSIx table: index=14 address_lo=c8e0 address_hi=10000000 msg_data=0 Dump MSIx table: index=15 address_lo=c8f0 address_hi=10000000 msg_data=0 [ 46.264312] ipr: Entering ipr_reset_restore_cfg_space [ 46.267439] ipr: Entering ipr_fail_all_ops [ 46.267447] ipr: Leaving ipr_fail_all_ops [ 46.267451] ipr: Leaving ipr_reset_restore_cfg_space [ 46.267454] ipr: Entering ipr_ioa_bringdown_done [ 46.267458] ipr: Leaving ipr_ioa_bringdown_done [ 46.267467] ipr: Entering ipr_worker_thread [ 46.267470] ipr: Leaving ipr_worker_thread IRQ balancing is not required during adapter reset. Enable "IRQ_NO_BALANCING" flag before starting adapter reset and disable it after calling pci_restore_state(). The irqbalance daemon is disabled for this short period of time (~2s). Co-developed-by: Kyle Mahlkuch Signed-off-by: Kyle Mahlkuch Signed-off-by: Wen Xiong Link: https://patch.msgid.link/20251028142427.3969819-2-wenxiong@linux.ibm.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

2024-05-21T17:09:28+00:00

Pull pci updates from Bjorn Helgaas: "Enumeration: - Skip E820 checks for MCFG ECAM regions for new (2016+) machines, since there's no requirement to describe them in E820 and some platforms require ECAM to work (Bjorn Helgaas) - Rename PCI_IRQ_LEGACY to PCI_IRQ_INTX to be more specific (Damien Le Moal) - Remove last user and pci_enable_device_io() (Heiner Kallweit) - Wait for Link Training==0 to avoid possible race (Ilpo Järvinen) - Skip waiting for devices that have been disconnected while suspended (Ilpo Järvinen) - Clear Secondary Status errors after enumeration since Master Aborts and Unsupported Request errors are an expected part of enumeration (Vidya Sagar) MSI: - Remove unused IMS (Interrupt Message Store) support (Bjorn Helgaas) Error handling: - Mask Genesys GL975x SD host controller Replay Timer Timeout correctable errors caused by a hardware defect; the errors cause interrupts that prevent system suspend (Kai-Heng Feng) - Fix EDR-related _DSM support, which previously evaluated revision 5 but assumed revision 6 behavior (Kuppuswamy Sathyanarayanan) ASPM: - Simplify link state definitions and mask calculation (Ilpo Järvinen) Power management: - Avoid D3cold for HP Pavilion 17 PC/1972 PCIe Ports, where BIOS apparently doesn't know how to put them back in D0 (Mario Limonciello) CXL: - Support resetting CXL devices; special handling required because CXL Ports mask Secondary Bus Reset by default (Dave Jiang) DOE: - Support DOE Discovery Version 2 (Alexey Kardashevskiy) Endpoint framework: - Set endpoint BAR to be 64-bit if the driver says that's all the device supports, in addition to doing so if the size is >2GB (Niklas Cassel) - Simplify endpoint BAR allocation and setting interfaces (Niklas Cassel) Cadence PCIe controller driver: - Drop DT binding redundant msi-parent and pci-bus.yaml (Krzysztof Kozlowski) Cadence PCIe endpoint driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) Freescale Layerscape PCIe controller driver: - Convert DT binding to YAML (Frank Li) MediaTek MT7621 PCIe controller driver: - Add DT binding missing 'reg' property for child Root Ports (Krzysztof Kozlowski) - Fix theoretical string truncation in PHY name (Sergio Paracuellos) NVIDIA Tegra194 PCIe controller driver: - Return success for endpoint probe instead of falling through to the failure path (Vidya Sagar) Renesas R-Car PCIe controller driver: - Add DT binding missing IOMMU properties (Geert Uytterhoeven) - Add DT binding R-Car V4H compatible for host and endpoint mode (Yoshihiro Shimoda) Rockchip PCIe controller driver: - Configure endpoint BARs to be 64-bit based on the BAR type, not the BAR value (Niklas Cassel) - Add DT binding missing maxItems to ep-gpios (Krzysztof Kozlowski) - Set the Subsystem Vendor ID, which was previously zero because it was masked incorrectly (Rick Wertenbroek) Synopsys DesignWare PCIe controller driver: - Restructure DBI register access to accommodate devices where this requires Refclk to be active (Manivannan Sadhasivam) - Remove the deinit() callback, which was only need by the pcie-rcar-gen4, and do it directly in that driver (Manivannan Sadhasivam) - Add dw_pcie_ep_cleanup() so drivers that support PERST# can clean up things like eDMA (Manivannan Sadhasivam) - Rename dw_pcie_ep_exit() to dw_pcie_ep_deinit() to make it parallel to dw_pcie_ep_init() (Manivannan Sadhasivam) - Rename dw_pcie_ep_init_complete() to dw_pcie_ep_init_registers() to reflect the actual functionality (Manivannan Sadhasivam) - Call dw_pcie_ep_init_registers() directly from all the glue drivers, not just those that require active Refclk from the host (Manivannan Sadhasivam) - Remove the "core_init_notifier" flag, which was an obscure way for glue drivers to indicate that they depend on Refclk from the host (Manivannan Sadhasivam) TI J721E PCIe driver: - Add DT binding J784S4 SoC Device ID (Siddharth Vadapalli) - Add DT binding J722S SoC support (Siddharth Vadapalli) TI Keystone PCIe controller driver: - Add DT binding missing num-viewport, phys and phy-name properties (Jan Kiszka) Miscellaneous: - Constify and annotate with __ro_after_init (Heiner Kallweit) - Convert DT bindings to YAML (Krzysztof Kozlowski) - Check for kcalloc() failure in of_pci_prop_intr_map() (Duoming Zhou)" * tag 'pci-v6.10-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (97 commits) PCI: Do not wait for disconnected devices when resuming x86/pci: Skip early E820 check for ECAM region PCI: Remove unused pci_enable_device_io() ata: pata_cs5520: Remove unnecessary call to pci_enable_device_io() PCI: Update pci_find_capability() stub return types PCI: Remove PCI_IRQ_LEGACY scsi: vmw_pvscsi: Do not use PCI_IRQ_LEGACY instead of PCI_IRQ_LEGACY scsi: pmcraid: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: mpt3sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: megaraid_sas: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: hpsa: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY scsi: arcmsr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY wifi: rtw89: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY dt-bindings: PCI: rockchip,rk3399-pcie: Add missing maxItems to ep-gpios Revert "genirq/msi: Provide constants for PCI/IMS support" Revert "x86/apic/msi: Enable PCI/IMS" Revert "iommu/vt-d: Enable PCI/IMS" Revert "iommu/amd: Enable PCI/IMS" Revert "PCI/MSI: Provide IMS (Interrupt Message Store) support" ...

scsi: ipr: Use PCI_IRQ_INTX instead of PCI_IRQ_LEGACY

2024-05-16T19:35:08+00:00

Use the macro PCI_IRQ_INTX instead of the deprecated PCI_IRQ_LEGACY macro. Link: https://lore.kernel.org/r/20240325070944.3600338-24-dlemoal@kernel.org Signed-off-by: Damien Le Moal Signed-off-by: Bjorn Helgaas Acked-by: Martin K. Petersen

scsi: ipr: Switch to using ->device_configure

2024-04-12T01:37:49+00:00

Switch to the ->device_configure method instead of ->slave_configure and update the block limits on the passed in queue_limits instead of using the per-limit accessors. Signed-off-by: Christoph Hellwig Link: https://lore.kernel.org/r/20240409143748.980206-16-hch@lst.de Reviewed-by: Damien Le Moal Reviewed-by: Hannes Reinecke Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen

scsi: ipr: Remove obsolete check for old CPUs

2023-12-06T02:05:09+00:00

The IPR driver has a routine to check whether it's running on certain CPU versions and if so whether the adapter is supported on that CPU. But none of the CPUs it checks for are supported by Linux anymore. The most recent CPU it checks for is Power4+ which was removed in commit 471d7ff8b51b ("powerpc/64s: Remove POWER4 support"). So drop the check. That makes the "testmode" module parameter unused, so remove it as well. Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20231127111740.1288463-1-mpe@ellerman.id.au Acked-by: Brian King Signed-off-by: Martin K. Petersen

scsi: ipr: Do PCI error checks on own line

2023-10-10T21:40:19+00:00

Instead of "if" conditions with line splits, use the usual error handling pattern with a separate variable to improve readability. No functional changes intended. Link: https://lore.kernel.org/r/20230911125354.25501-7-ilpo.jarvinen@linux.intel.com Signed-off-by: Ilpo Järvinen Signed-off-by: Bjorn Helgaas Reviewed-by: "Martin K. Petersen"

scsi: ipr: Remove several unused variables

2023-04-25T03:11:47+00:00

gcc with W=1 reports drivers/scsi/ipr.c: In function ‘ipr_init_res_entry’: drivers/scsi/ipr.c:1104:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1104 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_update_res_entry’: drivers/scsi/ipr.c:1261:22: error: variable ‘proto’ set but not used [-Werror=unused-but-set-variable] 1261 | unsigned int proto; | ^~~~~ drivers/scsi/ipr.c: In function ‘ipr_change_queue_depth’: drivers/scsi/ipr.c:4417:36: error: variable ‘res’ set but not used [-Werror=unused-but-set-variable] 4417 | struct ipr_resource_entry *res; | ^~~ These variables are not used, so remove them. The lock around res is not needed so remove that. This makes ioa_cfg and lock_flags unneeded so remove them as well. Fixes: 65a15d6560df ("scsi: ipr: Remove SATA support") Signed-off-by: Tom Rix Link: https://lore.kernel.org/r/20230420125035.3888188-1-trix@redhat.com Acked-by: Brian King Signed-off-by: Martin K. Petersen

scsi: ipr: Remove SATA support

2023-04-19T03:01:23+00:00

Linux SATA support in ipr has always been limited to SATA DVDs. The last systems that had the option of including a SATA DVD was Power 8, which have been withdrawn for some time now, so this support can be removed. Signed-off-by: Brian King Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com Reviewed-by: Damien Le Moal Reviewed-by: John Garry Signed-off-by: Martin K. Petersen

scsi: ipr: Declare SCSI host template const

2023-03-24T23:19:57+00:00

Make it explicit that the SCSI host template is not modified. Acked-by: Brian King Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230322195515.1267197-48-bvanassche@acm.org Signed-off-by: Martin K. Petersen

Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

2023-03-03T22:41:50+00:00

Pull more SCSI updates from James Bottomley: "Updates that missed the first pull, mostly because of needing more soak time. Driver updates (zfcp, ufs, mpi3mr, plus two ipr bug fixes), an enclosure services (ses) update (mostly bug fixes) and other minor bug fixes and changes" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits) scsi: zfcp: Trace when request remove fails after qdio send fails scsi: zfcp: Change the type of all fsf request id fields and variables to u64 scsi: zfcp: Make the type for accessing request hashtable buckets size_t scsi: ufs: core: Simplify ufshcd_execute_start_stop() scsi: ufs: core: Rely on the block layer for setting RQF_PM scsi: core: Extend struct scsi_exec_args scsi: lpfc: Fix double word in comments scsi: core: Remove the /proc/scsi/${proc_name} directory earlier scsi: core: Fix a source code comment scsi: cxgbi: Remove unneeded version.h include scsi: qedi: Remove unneeded version.h include scsi: mpi3mr: Remove unneeded version.h include scsi: mpi3mr: Fix missing mrioc->evtack_cmds initialization scsi: mpi3mr: Use number of bits to manage bitmap sizes scsi: mpi3mr: Remove unnecessary memcpy() to alltgt_info->dmi scsi: mpi3mr: Fix issues in mpi3mr_get_all_tgt_info() scsi: mpi3mr: Fix an issue found by KASAN scsi: mpi3mr: Replace 1-element array with flex-array scsi: ipr: Work around fortify-string warning scsi: ipr: Make ipr_probe_ioa_part2() return void ...