kernel/linux.git/drivers/scsi/aacraid/src.c, branch v4.4.171

scsi: aacraid: Fix typo in blink status

2018-11-10T15:41:40+00:00

[ Upstream commit 934767c56b0d9dbb95a40e9e6e4d9dcdc3a165ad ] The return status of the adapter check on KERNEL_PANIC is supposed to be the upper 16 bits of the OMR status register. Fixes: c421530bf848604e (scsi: aacraid: Reorder Adpater status check) Reported-by: Dan Carpenter Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Dave Carroll Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: aacraid: Reorder Adapter status check

2017-03-12T05:37:26+00:00

commit c421530bf848604e97d0785a03b3fe2c62775083 upstream. The driver currently checks the SELF_TEST_FAILED first and then KERNEL_PANIC next. Under error conditions(boot code failure) both SELF_TEST_FAILED and KERNEL_PANIC can be set at the same time. The driver has the capability to reset the controller on an KERNEL_PANIC, but not on SELF_TEST_FAILED. Fixed by first checking KERNEL_PANIC and then the others. Fixes: e8b12f0fb835223752 ([SCSI] aacraid: Add new code for PMC-Sierra's SRC base controller family) Signed-off-by: Raghava Aditya Renukunta Reviewed-by: David Carroll Reviewed-by: Johannes Thumshirn Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

aacraid: Fix RRQ overload

2016-04-12T16:08:38+00:00

commit 3f4ce057d51a9c0ed9b01ba693df685d230ffcae upstream. The driver utilizes an array of atomic variables to keep track of IO submissions to each vector. To submit an IO multiple threads iterate through the array to find a vector which has empty slots to send an IO. The reading and updating of the variable is not atomic, causing race conditions when a thread uses a full vector to submit an IO. Fixed by mapping each FIB to a vector, the submission path then uses said vector to submit IO thereby removing the possibly of a race condition.The vector assignment is started from 1 since vector 0 is reserved for the use of AIF management FIBS.If the number of MSIx vectors is 1 (MSI or INTx mode) then all the fibs are allocated to vector 0. Fixes: 495c0217 "aacraid: MSI-x support" Signed-off-by: Raghava Aditya Renukunta Reviewed-by: Johannes Thumshirn Reviewed-by: Tomas Henzl Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

aacraid: Reset irq affinity hints

2015-11-10T00:06:38+00:00

Reset irq affinity hints before releasing IRQ. Removed duplicate code of IRQ acquire/release. Reviewed-by: Tomas Henzl Reviewed-by: Murthy Bhat Reviewed-by: Karthikeya Sunkesula Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: Enable 64bit write to controller register

2015-11-10T00:01:29+00:00

If writeq() not supported, then do atomic two 32bit write Reviewed-by: Tomas Henzl Reviewed-by: Murthy Bhat Reviewed-by: Karthikeya Sunkesula Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: Change interrupt mode to MSI for Series 6

2015-11-10T00:00:29+00:00

This change always sets MSI interrupt mode for series-6 controller. Reviewed-by: Tomas Henzl Reviewed-by: Murthy Bhat Reviewed-by: Karthikeya Sunkesula Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: Add Power Management support

2015-11-09T23:59:18+00:00

* .suspend() and .resume() routines implemented in the driver * aac_release_resources() initiates firmware shutdown * aac_acquire_resources re-initializes the host interface Reviewed-by: Tomas Henzl Reviewed-by: Murthy Bhat Reviewed-by: Karthikeya Sunkesula Signed-off-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: aac_src_intr_message() can be static

2015-05-25T15:46:25+00:00

Signed-off-by: Fengguang Wu Acked-by: Mahesh Rajashekhara Signed-off-by: James Bottomley

aacraid: performance improvement changes

2015-04-09T23:55:21+00:00

Signed-off-by: Mahesh Rajashekhara Reviewed-by: Hannes Reinecke Reviewed-by: Murthy Bhat Signed-off-by: James Bottomley

aacraid: IOP RESET command handling changes

2015-04-09T23:53:37+00:00

This patch fixes the IOP_RESET issue. Sending IOP_RESET command need to wait for only 10 sec instead of 5 minutes in case of firmware does not response IOP_RESET command. Disable interrupt before setup interrupt routine to prevent spurious interrupts. Signed-off-by: Mahesh Rajashekhara Reviewed-by: Hannes Reinecke Reviewed-by: Murthy Bhat Signed-off-by: James Bottomley