kernel/linux.git/drivers/scsi/Kconfig, branch v6.6.131

scsi: jazz_esp: Only build if SCSI core is builtin

2024-03-01T12:35:06+00:00

[ Upstream commit 9ddf190a7df77b77817f955fdb9c2ae9d1c9c9a3 ] JAZZ_ESP is a bool kconfig symbol that selects SCSI_SPI_ATTRS. When CONFIG_SCSI=m, this results in SCSI_SPI_ATTRS=m while JAZZ_ESP=y, which causes many undefined symbol linker errors. Fix this by only offering to build this driver when CONFIG_SCSI=y. [mkp: JAZZ_ESP is unique in that it does not support being compiled as a module unlike the remaining SPI SCSI HBA drivers] Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Randy Dunlap Link: https://lore.kernel.org/r/20240214055953.9612-1-rdunlap@infradead.org Cc: Thomas Bogendoerfer Cc: linux-mips@vger.kernel.org Cc: Arnd Bergmann Cc: Masahiro Yamada Cc: Nicolas Schier Cc: James E.J. Bottomley Cc: Martin K. Petersen Cc: linux-scsi@vger.kernel.org Cc: Geert Uytterhoeven Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202402112222.Gl0udKyU-lkp@intel.com/ Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

scsi: ppa: Add a module parameter for the transfer mode

2023-08-21T20:32:40+00:00

I have an Iomega Z100P2 zip drive, but it does not work with my StarTech PEX1P2 AX99100 PCIe parallel port, which evidently does not support 16-bit or 32-bit EPP. Currently the only way to tell the PPA driver to use 8-bit EPP is to write 'mode=3' to /proc/scsi/ppa/*, but the driver doesn't actually distinguish between the three EPP modes and still tries to use 16-bit or 32-bit EPP. And even if writing to that file did make the driver use 8-bit EPP, it still wouldn't do me any good because by the time that file exists, the drive has already failed to initialize. Add a new parameter /sys/module/ppa/mode to set the transfer mode before initializing the drive. This parameter replaces the use of CONFIG_SCSI_IZIP_EPP16 in the PPA driver. At the same time, default to 8-bit EPP. 16-bit and 32-bit EPP are not necessary for the drive to function, nor are they part of the IEEE 1284 standard, so the driver should not assume that they are available. Signed-off-by: Alex Henrie Link: https://lore.kernel.org/r/20230807155856.362864-2-alexhenrie24@gmail.com Signed-off-by: Martin K. Petersen

scsi: Add HAS_IOPORT dependencies

2023-05-31T23:59:26+00:00

In a future patch HAS_IOPORT=n will result in inb()/outb() and friends not being declared. We thus need to add HAS_IOPORT as dependency for those drivers using them. Co-developed-by: Arnd Bergmann Signed-off-by: Arnd Bergmann Signed-off-by: Niklas Schnelle Link: https://lore.kernel.org/r/20230522105049.1467313-32-schnelle@linux.ibm.com Signed-off-by: Martin K. Petersen

scsi: ipr: Remove SATA support

2023-04-19T03:01:23+00:00

Linux SATA support in ipr has always been limited to SATA DVDs. The last systems that had the option of including a SATA DVD was Power 8, which have been withdrawn for some time now, so this support can be removed. Signed-off-by: Brian King Link: https://lore.kernel.org/r/20230412174015.114764-1-brking@linux.vnet.ibm.com Reviewed-by: Damien Le Moal Reviewed-by: John Garry Signed-off-by: Martin K. Petersen

scsi: core: Make SCSI_MOD depend on BLOCK for cleaner .config files

2022-09-25T16:46:59+00:00

SCSI_MOD is a helper config symbol for configuring RAID_ATTRS properly, i.e., RAID_ATTRS needs to be m when SCSI=m. This helper config symbol SCSI_MOD still shows up even in kernel configurations that do not select the block subsystem and where SCSI is not even a configuration option mentioned and selectable. Make this SCSI_MOD depend on BLOCK, so that it only shows up when it is slightly relevant in the kernel configuration. Link: https://lore.kernel.org/r/20220919060112.24802-1-lukas.bulwahn@gmail.com Reviewed-by: Bart Van Assche Signed-off-by: Lukas Bulwahn Signed-off-by: Martin K. Petersen

scsi: dpt_i2o: Remove obsolete driver

2022-06-28T02:56:21+00:00

The dpt_i2o driver was fixed to stop using virt_to_bus() in 2008, but it still has a stale reference in an error handling code path that could never work. I submitted a patch to fix this reference earlier, but Hannes Reinecke suggested that removing the driver may be just as good here. The i2o driver layer was removed in 2015 with commit 4a72a7af462d ("staging: remove i2o subsystem"), but the even older dpt_i2o scsi driver stayed around. The last non-cleanup patches I could find were from Miquel van Smoorenburg and Mark Salyzyn back in 2008, they might know if there is any chance of the hardware still being used anywhere. Link: https://lore.kernel.org/linux-scsi/CAK8P3a1XfwkTOV7qOs1fTxf4vthNBRXKNu8A5V7TWnHT081NGA@mail.gmail.com/T/ Link: https://lore.kernel.org/r/20220624155226.2889613-3-arnd@kernel.org Cc: Miquel van Smoorenburg Cc: Mark Salyzyn Cc: Hannes Reinecke Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen

scsi: BusLogic: Remove bus_to_virt()

2022-06-28T02:52:05+00:00

The BusLogic driver is the last remaining driver that relies on the deprecated bus_to_virt() function, which in turn only works on a few architectures, and is incompatible with both swiotlb and iommu support. Before commit 391e2f25601e ("[SCSI] BusLogic: Port driver to 64-bit."), the driver had a dependency on x86-32, presumably because of this problem. However, the change introduced another bug that made it still impossible to use the driver on any 64-bit machine. This was in turn fixed in commit 56f396146af2 ("scsi: BusLogic: Fix 64-bit system enumeration error for Buslogic"), 8 years later, which shows that there are not a lot of users. Maciej is still using the driver on 32-bit hardware, and Khalid mentioned that the driver works with the device emulation used in VirtualBox and VMware. Both of those only emulate it for Windows 2000 and older operating systems that did not ship with the better LSI logic driver. Do a minimum fix that searches through the list of descriptors to find one that matches the bus address. This is clearly as inefficient as was indicated in the code comment about the lack of a bus_to_virt() replacement. A better fix would likely involve changing out the entire descriptor allocation for a simpler one, but that would be much more invasive. Link: https://lore.kernel.org/r/20220624155226.2889613-2-arnd@kernel.org Cc: Maciej W. Rozycki Cc: Matt Wang Tested-by: Khalid Aziz Reviewed-by: Robin Murphy Reviewed-by: Hannes Reinecke Acked-by: Khalid Aziz Signed-off-by: Arnd Bergmann Signed-off-by: Martin K. Petersen

scsi: ufs: Split the drivers/scsi/ufs directory

2022-05-20T00:27:37+00:00

Split the drivers/scsi/ufs directory into 'core' and 'host' directories under the drivers/ufs/ directory. Move shared header files into the include/ufs/ directory. This separation makes it clear which header files UFS drivers are allowed to include (include/ufs/*.h) and which header files UFS drivers are not allowed to include (drivers/ufs/core/*.h). Update the MAINTAINERS file. Add myself as a UFS reviewer. Link: https://lore.kernel.org/r/20220511212552.655341-1-bvanassche@acm.org Cc: Adrian Hunter Cc: Avri Altman Cc: Bean Huo Cc: Bjorn Andersson Cc: Keoseong Park Tested-by: Bean Huo Tested-by: Adrian Hunter Reviewed-by: Bean Huo Acked-by: Avri Altman Acked-by: Adrian Hunter Signed-off-by: Bart Van Assche Signed-off-by: Martin K. Petersen

scsi: core: Rename CONFIG_BLK_SCSI_REQUEST to CONFIG_SCSI_COMMON

2021-07-29T02:24:27+00:00

CONFIG_BLK_SCSI_REQUEST is rather misnamed as it enables building a small amount of code shared by the SCSI initiator, target, and consumers of the scsi_request passthrough API. Rename it and also allow building it as a module. [mkp: add module license] Link: https://lore.kernel.org/r/20210724072033.1284840-20-hch@lst.de Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen

scsi: bsg: Move bsg_scsi_ops to drivers/scsi/

2021-07-29T02:24:26+00:00

Move the SCSI-specific bsg code in the SCSI midlayer instead of in the common bsg code. This just keeps the common bsg code block/ and also allows building it as a module. Link: https://lore.kernel.org/r/20210724072033.1284840-15-hch@lst.de Signed-off-by: Christoph Hellwig Signed-off-by: Martin K. Petersen