kernel/linux.git/drivers/scsi/BusLogic.c, branch v6.18.22

scsi: buslogic: Reduce stack usage

2026-03-04T12:20:28+00:00

[ Upstream commit e17f0d4cc006265dd92129db4bf9da3a2e4a4f66 ] Some randconfig builds run into excessive stack usage with gcc-14 or higher, which use __attribute__((cold)) where earlier versions did not do that: drivers/scsi/BusLogic.c: In function 'blogic_init': drivers/scsi/BusLogic.c:2398:1: error: the frame size of 1680 bytes is larger than 1536 bytes [-Werror=frame-larger-than=] The problem is that a lot of code gets inlined into blogic_init() here. Two functions stick out, but they are a bit different: - blogic_init_probeinfo_list() actually uses a few hundred bytes of kernel stack, which is a problem in combination with other functions that also do. Marking this one as noinline means that the stack slots get get reused between function calls - blogic_reportconfig() has a few large variables, but whenever it is not inlined into its caller, the compiler is actually smart enough to reuse stack slots for these automatically, so marking it as noinline saves most of the stack space by itself. The combination of both of these should avoid the problem entirely. Signed-off-by: Arnd Bergmann Link: https://patch.msgid.link/20260203163321.2598593-1-arnd@kernel.org Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin

Merge tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

2025-10-02T17:16:56+00:00

Pull block updates from Jens Axboe: - NVMe pull request via Keith: - FC target fixes (Daniel) - Authentication fixes and updates (Martin, Chris) - Admin controller handling (Kamaljit) - Target lockdep assertions (Max) - Keep-alive updates for discovery (Alastair) - Suspend quirk (Georg) - MD pull request via Yu: - Add support for a lockless bitmap. A key feature for the new bitmap are that the IO fastpath is lockless. If a user issues lots of write IO to the same bitmap bit in a short time, only the first write has additional overhead to update bitmap bit, no additional overhead for the following writes. By supporting only resync or recover written data, means in the case creating new array or replacing with a new disk, there is no need to do a full disk resync/recovery. - Switch ->getgeo() and ->bios_param() to using struct gendisk rather than struct block_device. - Rust block changes via Andreas. This series adds configuration via configfs and remote completion to the rnull driver. The series also includes a set of changes to the rust block device driver API: a few cleanup patches, and a few features supporting the rnull changes. The series removes the raw buffer formatting logic from `kernel::block` and improves the logic available in `kernel::string` to support the same use as the removed logic. - floppy arch cleanups - Reduce the number of dereferencing needed for ublk commands - Restrict supported sockets for nbd. Mostly done to eliminate a class of issues perpetually reported by syzbot, by using nonsensical socket setups. - A few s390 dasd block fixes - Fix a few issues around atomic writes - Improve DMA interation for integrity requests - Improve how iovecs are treated with regards to O_DIRECT aligment constraints. We used to require each segment to adhere to the constraints, now only the request as a whole needs to. - Clean up and improve p2p support, enabling use of p2p for metadata payloads - Improve locking of request lookup, using SRCU where appropriate - Use page references properly for brd, avoiding very long RCU sections - Fix ordering of recursively submitted IOs - Clean up and improve updating nr_requests for a live device - Various fixes and cleanups * tag 'for-6.18/block-20250929' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (164 commits) s390/dasd: enforce dma_alignment to ensure proper buffer validation s390/dasd: Return BLK_STS_INVAL for EINVAL from do_dasd_request ublk: remove redundant zone op check in ublk_setup_iod() nvme: Use non zero KATO for persistent discovery connections nvmet: add safety check for subsys lock nvme-core: use nvme_is_io_ctrl() for I/O controller check nvme-core: do ioccsz/iorcsz validation only for I/O controllers nvme-core: add method to check for an I/O controller blk-cgroup: fix possible deadlock while configuring policy blk-mq: fix null-ptr-deref in blk_mq_free_tags() from error path blk-mq: Fix more tag iteration function documentation selftests: ublk: fix behavior when fio is not installed ublk: don't access ublk_queue in ublk_unmap_io() ublk: pass ublk_io to __ublk_complete_rq() ublk: don't access ublk_queue in ublk_need_complete_req() ublk: don't access ublk_queue in ublk_check_commit_and_fetch() ublk: don't pass ublk_queue to ublk_fetch() ublk: don't access ublk_queue in ublk_config_io_buf() ublk: don't access ublk_queue in ublk_check_fetch_buf() ublk: pass q_id and tag to __ublk_check_and_get_req() ...

scsi: Always define blogic_pci_tbl structure

2025-09-24T16:10:44+00:00

The blogic_pci_tbl structure is used by the MODULE_DEVICE_TABLE macro. There is no longer a need to protect it with the MODULE condition, since this no longer causes the compiler to warn about an unused variable. To avoid warnings when -Wunused-const-variable option is used, mark it as __maybe_unused for such configuration. Cc: Khalid Aziz Cc: Martin K. Petersen Cc: linux-scsi@vger.kernel.org Suggested-by: James Bottomley Signed-off-by: Alexey Gladkov Signed-off-by: Arnd Bergmann Reviewed-by: Damien Le Moal Acked-by: Martin K. Petersen Link: https://patch.msgid.link/fd8e30de07de79a4923ae967eaee5ba2f2fcef00.1758182101.git.legion@kernel.org Signed-off-by: Nathan Chancellor

scsi: switch ->bios_param() to passing gendisk

2025-08-13T06:59:28+00:00

Instances are passed struct block_device *bdev argument; the only thing it is used for (if it's used in the first place) is bdev->bd_disk. Might as well pass that in the first place... Reviewed-by: Martin K. Petersen Reviewed-by: Christoph Hellwig Acked-by: Jens Axboe Signed-off-by: Al Viro

scsi: switch scsi_bios_ptable() and scsi_partsize() to gendisk

2025-08-13T06:59:28+00:00

Both helpers are reading the partition table of the disk specified by block_device of some partition on it; result depends only upon the disk in question, so we might as well pass the struct gendisk instead. Reviewed-by: Martin K. Petersen Reviewed-by: Christoph Hellwig Acked-by: Jens Axboe Signed-off-by: Al Viro

scsi: Constify struct pci_device_id

2024-12-10T02:59:52+00:00

'struct pci_device_id' is not modified in these drivers. Constifying this structure moves some data to a read-only section, so increase overall security. On a x86_64, with allmodconfig, as an example: Before: ====== text data bss dec hex filename 70237 9137 320 79694 1374e drivers/scsi/3w-9xxx.o After: ===== text data bss dec hex filename 70461 8913 320 79694 1374e drivers/scsi/3w-9xxx.o Signed-off-by: Christophe JAILLET Link: https://lore.kernel.org/r/fc61b1946488c1ea8f7a17a06cf40fbd05dcc6de.1733590049.git.christophe.jaillet@wanadoo.fr Signed-off-by: Martin K. Petersen

scsi: Convert SCSI drivers to .sdev_configure()

2024-12-04T20:34:28+00:00

The only difference between the .sdev_configure() and .slave_configure() methods is that the former accepts an additional 'limits' argument. Convert all SCSI drivers that define a .slave_configure() method to .sdev_configure(). This patch prepares for removing the .slave_configure() method. No functionality has been changed. Acked-by: Geoff Levand # for ps3rom Acked-by: Khalid Aziz # for the BusLogic driver Reviewed-by: Damien Le Moal Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20241022180839.2712439-4-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: Add missing MODULE_DESCRIPTION() macros

2024-06-12T01:33:58+00:00

On x86, make allmodconfig && make W=1 C=1 reports: WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/scsi_common.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/advansys.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/BusLogic.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/aha1740.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/isci/isci.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/elx/efct.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/atp870u.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/ppa.o WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/scsi/imm.o Add all missing invocations of the MODULE_DESCRIPTION() macro. This updates all files which have a MODULE_LICENSE() but which do not have a MODULE_DESCRIPTION(), even ones which did not produce the x86 allmodconfig warnings. Acked-by: Finn Thain Signed-off-by: Jeff Johnson Link: https://lore.kernel.org/r/20240610-md-drivers-scsi-v3-1-055da78d66b2@quicinc.com Signed-off-by: Martin K. Petersen

scsi: BusLogic: Declare SCSI host template const

2023-03-24T23:19:20+00:00

Make it explicit that the SCSI host template is not modified. Acked-by: Khalid Aziz Signed-off-by: Bart Van Assche Link: https://lore.kernel.org/r/20230322195515.1267197-13-bvanassche@acm.org Signed-off-by: Martin K. Petersen

scsi: BusLogic: Remove variable 'adapter_count'

2022-11-08T03:01:12+00:00

Variable 'adapter_count' is just being incremented and it's never used anywhere else. Remove it. Signed-off-by: Colin Ian King Link: https://lore.kernel.org/r/20221031160512.872153-1-colin.i.king@gmail.com Acked-by: Khalid Aziz Signed-off-by: Martin K. Petersen