kernel/linux.git/drivers/s390, branch v7.0-rc7

Merge tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2026-04-04T00:50:24+00:00

Pull s390 fixes from Vasily Gorbik: - Fix a memory leak in the zcrypt driver where the AP message buffer for clear key RSA requests was allocated twice, once by the caller and again locally, causing the first allocation to never be freed - Fix the cpum_sf perf sampling rate overflow adjustment to clamp the recalculated rate to the hardware maximum, preventing exceptions on heavily loaded systems running with HZ=1000 * tag 's390-7.0-7' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Fix memory leak with CCA cards used as accelerator s390/cpum_sf: Cap sampling rate to prevent lsctl exception

s390/zcrypt: Fix memory leak with CCA cards used as accelerator

2026-03-24T19:57:31+00:00

Tests showed that there is a memory leak if CCA cards are used as accelerator for clear key RSA requests (ME and CRT). With the last rework for the memory allocation the AP messages are allocated by ap_init_apmsg() but for some reason on two places (ME and CRT) the older allocation was still in place. So the first allocation simple was never freed. Fixes: 57db62a130ce ("s390/ap/zcrypt: Rework AP message buffer allocation") Reported-by: Yi Zhang Closes: https://lore.kernel.org/linux-s390/CAHj4cs9H67Uz0iVaRQv447p7JFPRPy3TKAT4=Y6_e=wSHCZM5w@mail.gmail.com/ Reported-by: Nadja Hariz Cc: stable@vger.kernel.org Reviewed-by: Ingo Franzki Reviewed-by: Holger Dengler Acked-by: Heiko Carstens Signed-off-by: Harald Freudenberger Signed-off-by: Vasily Gorbik

Merge tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2026-03-13T21:18:13+00:00

Pull s390 fixes from Vasily Gorbik: - Revert IRQ entry/exit path optimization that incorrectly cleared some PSW bits before irqentry_exit(), causing boot failures with linux-next and HRTIMER_REARM_DEFERRED (which only uncovered the problem) - Fix zcrypt code to show CCA card serial numbers even when the default crypto domain is offline by selecting any domain available, preventing empty sysfs entries * tag 's390-7.0-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute s390: Revert "s390/irq/idle: Remove psw bits early"

Merge tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

2026-03-13T17:13:06+00:00

Pull block fixes from Jens Axboe: - NVMe pull request via Keith: - Fix nvme-pci IRQ race and slab-out-of-bounds access - Fix recursive workqueue locking for target async events - Various cleanups - Fix a potential NULL pointer dereference in ublk on size setting - ublk automatic partition scanning fix - Two s390 dasd fixes * tag 'block-7.0-20260312' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: nvme: Annotate struct nvme_dhchap_key with __counted_by nvme-core: do not pass empty queue_limits to blk_mq_alloc_queue() nvme-pci: Fix race bug in nvme_poll_irqdisable() nvmet: move async event work off nvmet-wq nvme-pci: Fix slab-out-of-bounds in nvme_dbbuf_set s390/dasd: Copy detected format information to secondary device s390/dasd: Move quiesce state with pprc swap ublk: don't clear GD_SUPPRESS_PART_SCAN for unprivileged daemons ublk: fix NULL pointer dereference in ublk_ctrl_set_size()

s390/dasd: Copy detected format information to secondary device

2026-03-10T14:58:38+00:00

During online processing for a DASD device an IO operation is started to determine the format of the device. CDL format contains specifically sized blocks at the beginning of the disk. For a PPRC secondary device no real IO operation is possible therefore this IO request can not be started and this step is skipped for online processing of secondary devices. This is generally fine since the secondary is a copy of the primary device. In case of an additional partition detection that is run after a swap operation the format information is needed to properly drive partition detection IO. Currently the information is not passed leading to IO errors during partition detection and a wrongly detected partition table which in turn might lead to data corruption on the disk with the wrong partition table. Fix by passing the format information from primary to secondary device. Fixes: 413862caad6f ("s390/dasd: add copy pair swap capability") Cc: stable@vger.kernel.org #6.1 Reviewed-by: Jan Hoeppner Acked-by: Eduard Shishkin Signed-off-by: Stefan Haberland Link: https://patch.msgid.link/20260310142330.4080106-3-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: Move quiesce state with pprc swap

2026-03-10T14:58:38+00:00

Quiesce and resume is a mechanism to suspend operations on DASD devices. In the context of a controlled copy pair swap operation, the quiesce operation is usually issued before the actual swap and a resume afterwards. During the swap operation, the underlying device is exchanged. Therefore, the quiesce flag must be moved to the secondary device to ensure a consistent quiesce state after the swap. The secondary device itself cannot be suspended separately because there is no separate block device representation for it. Fixes: 413862caad6f ("s390/dasd: add copy pair swap capability") Cc: stable@vger.kernel.org #6.1 Reviewed-by: Jan Hoeppner Signed-off-by: Stefan Haberland Link: https://patch.msgid.link/20260310142330.4080106-2-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/zcrypt: Enable AUTOSEL_DOM for CCA serialnr sysfs attribute

2026-03-07T21:41:10+00:00

The serialnr sysfs attribute for CCA cards when queried always used the default domain for sending the request down to the card. If for any reason exactly this default domain is disabled then the attribute code fails to retrieve the CCA info and the sysfs entry shows an empty string. Works as designed but the serial number is a card attribute and thus it does not matter which domain is used for the query. So if there are other domains on this card available, these could be used. So extend the code to use AUTOSEL_DOM for the domain value to address any online domain within the card for querying the cca info and thus show the serialnr as long as there is one domain usable regardless of the default domain setting. Fixes: 8f291ebf3270 ("s390/zcrypt: enable card/domain autoselect on ep11 cprbs") Suggested-by: Ingo Franzki Signed-off-by: Harald Freudenberger Reviewed-by: Ingo Franzki Cc: stable@vger.kernel.org Signed-off-by: Vasily Gorbik

Convert remaining multi-line kmalloc_obj/flex GFP_KERNEL uses

2026-02-22T16:26:33+00:00

Conversion performed via this Coccinelle script: // SPDX-License-Identifier: GPL-2.0-only // Options: --include-headers-for-types --all-includes --include-headers --keep-comments virtual patch @gfp depends on patch && !(file in "tools") && !(file in "samples")@ identifier ALLOC = {kmalloc_obj,kmalloc_objs,kmalloc_flex, kzalloc_obj,kzalloc_objs,kzalloc_flex, kvmalloc_obj,kvmalloc_objs,kvmalloc_flex, kvzalloc_obj,kvzalloc_objs,kvzalloc_flex}; @@ ALLOC(... - , GFP_KERNEL ) $ make coccicheck MODE=patch COCCI=gfp.cocci Build and boot tested x86_64 with Fedora 42's GCC and Clang: Linux version 6.19.0+ (user@host) (gcc (GCC) 15.2.1 20260123 (Red Hat 15.2.1-7), GNU ld version 2.44-12.fc42) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Linux version 6.19.0+ (user@host) (clang version 20.1.8 (Fedora 20.1.8-4.fc42), LLD 20.1.8) #1 SMP PREEMPT_DYNAMIC 1970-01-01 Signed-off-by: Kees Cook Signed-off-by: Linus Torvalds

Convert more 'alloc_obj' cases to default GFP_KERNEL arguments

2026-02-22T04:03:00+00:00

This converts some of the visually simpler cases that have been split over multiple lines. I only did the ones that are easy to verify the resulting diff by having just that final GFP_KERNEL argument on the next line. Somebody should probably do a proper coccinelle script for this, but for me the trivial script actually resulted in an assertion failure in the middle of the script. I probably had made it a bit _too_ trivial. So after fighting that far a while I decided to just do some of the syntactically simpler cases with variations of the previous 'sed' scripts. The more syntactically complex multi-line cases would mostly really want whitespace cleanup anyway. Signed-off-by: Linus Torvalds

Convert 'alloc_flex' family to use the new default GFP_KERNEL argument

2026-02-22T01:09:51+00:00

This is the exact same thing as the 'alloc_obj()' version, only much smaller because there are a lot fewer users of the *alloc_flex() interface. As with alloc_obj() version, this was done entirely with mindless brute force, using the same script, except using 'flex' in the pattern rather than 'objs*'. Signed-off-by: Linus Torvalds