kernel/linux.git/drivers/s390, branch v4.19.39

scsi: zfcp: reduce flood of fcrscn1 trace records on multi-element RSCN

2019-05-04T07:20:21+00:00

[ Upstream commit c8206579175c34a2546de8a74262456278a7795a ] If an incoming ELS of type RSCN contains more than one element, zfcp suboptimally causes repeated erp trigger NOP trace records for each previously failed port. These could be ports that went away. It loops over each RSCN element, and for each of those in an inner loop over all zfcp_ports. The trigger to recover failed ports should be just the reception of some RSCN, no matter how many elements it has. So we can loop over failed ports separately, and only then loop over each RSCN element to handle the non-failed ports. The call chain was: zfcp_fc_incoming_rscn for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== In order the reduce the "flooding" of the REC trace area in such cases, we factor out handling the failed ports to be outside of the entries loop: zfcp_fc_incoming_rscn if (no_entries > 1) <=== list_for_each_entry(port, &adapter->port_list, list) <=== if (!port->d_id) zfcp_erp_port_reopen "fcrscn1" <=== for (i = 1; i < no_entries; i++) _zfcp_fc_incoming_rscn list_for_each_entry(port, &adapter->port_list, list) if (masked port->d_id match) zfcp_fc_test_link Abbreviated example trace records before this code change: Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x02 Tag : fcrscn1 WWPN : 0x500507630310d327 ERP want : 0x02 ERP need : 0x00 NOP => superfluous trace record The last trace entry repeats if there are more than 2 RSCN elements. Signed-off-by: Steffen Maier Reviewed-by: Benjamin Block Reviewed-by: Jens Remus Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin (Microsoft)

s390/qeth: fix race when initializing the IP address table

2019-05-04T07:20:13+00:00

[ Upstream commit 7221b727f0079a32aca91f657141e1de564d4b97 ] The ucast IP table is utilized by some of the L3-specific sysfs attributes that qeth_l3_create_device_attributes() provides. So initialize the table _before_ registering the attributes. Fixes: ebccc7397e4a ("s390/qeth: add missing hash table initializations") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin (Microsoft)

s390/ism: ignore some errors during deregistration

2019-04-05T20:33:04+00:00

[ Upstream commit 0ff06c44efeede4acd068847d3bf8cf894b6c664 ] Prior to dma unmap/free operations the ism driver tries to ensure that the memory is no longer accessed by the HW. When errors during deregistration of memory regions from the HW occur the ism driver will not unmap/free this memory. When we receive notification from the hypervisor that a PCI function has been detached we can no longer access the device and would never unmap/free these memory regions which led to complaints by the DMA debug API. Treat this kind of errors during the deregistration of memory regions from the HW as success since it is already ensured that the memory is no longer accessed by HW. Reported-by: Karsten Graul Reported-by: Hans Wippel Signed-off-by: Sebastian Ott Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

scsi: zfcp: fix scsi_eh host reset with port_forced ERP for non-NPIV FCP devices

2019-04-03T04:26:24+00:00

commit 242ec1455151267fe35a0834aa9038e4c4670884 upstream. Suppose more than one non-NPIV FCP device is active on the same channel. Send I/O to storage and have some of the pending I/O run into a SCSI command timeout, e.g. due to bit errors on the fibre. Now the error situation stops. However, we saw FCP requests continue to timeout in the channel. The abort will be successful, but the subsequent TUR fails. Scsi_eh starts. The LUN reset fails. The target reset fails. The host reset only did an FCP device recovery. However, for non-NPIV FCP devices, this does not close and reopen ports on the SAN-side if other non-NPIV FCP device(s) share the same open ports. In order to resolve the continuing FCP request timeouts, we need to explicitly close and reopen ports on the SAN-side. This was missing since the beginning of zfcp in v2.6.0 history commit ea127f975424 ("[PATCH] s390 (7/7): zfcp host adapter."). Note: The FSF requests for forced port reopen could run into FSF request timeouts due to other reasons. This would trigger an internal FCP device recovery. Pending forced port reopen recoveries would get dismissed. So some ports might not get fully reopened during this host reset handler. However, subsequent I/O would trigger the above described escalation and eventually all ports would be forced reopen to resolve any continuing FCP request timeouts due to earlier bit errors. Signed-off-by: Steffen Maier Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: #3.0+ Reviewed-by: Jens Remus Reviewed-by: Benjamin Block Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

scsi: zfcp: fix rport unblock if deleted SCSI devices on Scsi_Host

2019-04-03T04:26:24+00:00

commit fe67888fc007a76b81e37da23ce5bd8fb95890b0 upstream. An already deleted SCSI device can exist on the Scsi_Host and remain there because something still holds a reference. A new SCSI device with the same H:C:T:L and FCP device, target port WWPN, and FCP LUN can be created. When we try to unblock an rport, we still find the deleted SCSI device and return early because the zfcp_scsi_dev of that SCSI device is not ZFCP_STATUS_COMMON_UNBLOCKED. Hence we miss to unblock the rport, even if the new proper SCSI device would be in good state. Therefore, skip deleted SCSI devices when iterating the sdevs of the shost. [cf. __scsi_device_lookup{_by_target}() or scsi_device_get()] The following abbreviated trace sequence can indicate such problem: Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 not ZFCP_STATUS_COMMON_UNBLOCKED Ready count : n not incremented yet Running count : 0x00000000 ERP want : 0x01 ERP need : 0xc1 ZFCP_ERP_ACTION_NONE Area : REC Tag : ersfs_3 LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x41000000 Ready count : n+1 Running count : 0x00000000 ERP want : 0x01 ERP need : 0x01 ... Area : REC Level : 4 only with increased trace level Tag : ertru_l LUN : 0x4045400300000000 WWPN : 0x50050763031bd327 LUN status : 0x40000000 Request ID : 0x0000000000000000 ERP status : 0x01800000 ERP step : 0x1000 ERP action : 0x01 ERP count : 0x00 NOT followed by a trace record with tag "scpaddy" for WWPN 0x50050763031bd327. Signed-off-by: Steffen Maier Fixes: 6f2ce1c6af37 ("scsi: zfcp: fix rport unblock race with LUN recovery") Cc: #2.6.32+ Reviewed-by: Jens Remus Reviewed-by: Benjamin Block Signed-off-by: Martin K. Petersen Signed-off-by: Greg Kroah-Hartman

vfio: ccw: only free cp on final interrupt

2019-04-03T04:26:21+00:00

commit 50b7f1b7236bab08ebbbecf90521e84b068d7a17 upstream. When we get an interrupt for a channel program, it is not necessarily the final interrupt; for example, the issuing guest may request an intermediate interrupt by specifying the program-controlled-interrupt flag on a ccw. We must not switch the state to idle if the interrupt is not yet final; even more importantly, we must not free the translated channel program if the interrupt is not yet final, or the host can crash during cp rewind. Fixes: e5f84dbaea59 ("vfio: ccw: return I/O results asynchronously") Cc: stable@vger.kernel.org # v4.12+ Reviewed-by: Eric Farman Signed-off-by: Cornelia Huck Signed-off-by: Greg Kroah-Hartman

s390/virtio: handle find on invalid queue gracefully

2019-03-23T19:09:58+00:00

commit 3438b2c039b4bf26881786a1f3450f016d66ad11 upstream. A queue with a capacity of zero is clearly not a valid virtio queue. Some emulators report zero queue size if queried with an invalid queue index. Instead of crashing in this case let us just return -ENOENT. To make that work properly, let us fix the notifier cleanup logic as well. Cc: stable@vger.kernel.org Signed-off-by: Halil Pasic Signed-off-by: Cornelia Huck Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman

s390/dasd: fix using offset into zero size array error

2019-03-23T19:09:42+00:00

[ Upstream commit 4a8ef6999bce998fa5813023a9a6b56eea329dba ] Dan Carpenter reported the following: The patch 52898025cf7d: "[S390] dasd: security and PSF update patch for EMC CKD ioctl" from Mar 8, 2010, leads to the following static checker warning: drivers/s390/block/dasd_eckd.c:4486 dasd_symm_io() error: using offset into zero size array 'psf_data[]' drivers/s390/block/dasd_eckd.c 4458 /* Copy parms from caller */ 4459 rc = -EFAULT; 4460 if (copy_from_user(&usrparm, argp, sizeof(usrparm))) ^^^^^^^ The user can specify any "usrparm.psf_data_len". They choose zero by mistake. 4461 goto out; 4462 if (is_compat_task()) { 4463 /* Make sure pointers are sane even on 31 bit. */ 4464 rc = -EINVAL; 4465 if ((usrparm.psf_data >> 32) != 0) 4466 goto out; 4467 if ((usrparm.rssd_result >> 32) != 0) 4468 goto out; 4469 usrparm.psf_data &= 0x7fffffffULL; 4470 usrparm.rssd_result &= 0x7fffffffULL; 4471 } 4472 /* alloc I/O data area */ 4473 psf_data = kzalloc(usrparm.psf_data_len, GFP_KERNEL | GFP_DMA); 4474 rssd_result = kzalloc(usrparm.rssd_result_len, GFP_KERNEL | GFP_DMA); 4475 if (!psf_data || !rssd_result) { kzalloc() returns a ZERO_SIZE_PTR (0x16). 4476 rc = -ENOMEM; 4477 goto out_free; 4478 } 4479 4480 /* get syscall header from user space */ 4481 rc = -EFAULT; 4482 if (copy_from_user(psf_data, 4483 (void __user *)(unsigned long) usrparm.psf_data, 4484 usrparm.psf_data_len)) That all works great. 4485 goto out_free; 4486 psf0 = psf_data[0]; 4487 psf1 = psf_data[1]; But now we're assuming that "->psf_data_len" was at least 2 bytes. Fix this by checking the user specified length psf_data_len. Fixes: 52898025cf7d ("[S390] dasd: security and PSF update patch for EMC CKD ioctl") Reported-by: Dan Carpenter Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky Signed-off-by: Sasha Levin

s390/qeth: cancel close_dev work before removing a card

2019-03-13T21:02:37+00:00

[ Upstream commit c2780c1a3fb724560b1d44f7976e0de17bf153c7 ] A card's close_dev work is scheduled on a driver-wide workqueue. If the card is removed and freed while the work is still active, this causes a use-after-free. So make sure that the work is completed before freeing the card. Fixes: 0f54761d167f ("qeth: Support VEPA mode") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Sasha Levin

s390/qeth: fix use-after-free in error path

2019-03-13T21:02:37+00:00

[ Upstream commit afa0c5904ba16d59b0454f7ee4c807dae350f432 ] The error path in qeth_alloc_qdio_buffers() that takes care of cleaning up the Output Queues is buggy. It first frees the queue, but then calls qeth_clear_outq_buffers() with that very queue struct. Make the call to qeth_clear_outq_buffers() part of the free action (in the correct order), and while at it fix the naming of the helper. Fixes: 0da9581ddb0f ("qeth: exploit asynchronous delivery of storage blocks") Signed-off-by: Julian Wiedmann Reviewed-by: Alexandra Winter Signed-off-by: David S. Miller Signed-off-by: Sasha Levin