kernel/linux.git/drivers/s390, branch v4.11.5

s390/qeth: add missing hash table initializations

2017-06-07T10:09:59+00:00

[ Upstream commit ebccc7397e4a49ff64c8f44a54895de9d32fe742 ] commit 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") added new hash tables, but missed to initialize them. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Ursula Braun Reviewed-by: Julian Wiedmann Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: avoid null pointer dereference on OSN

2017-06-07T10:09:59+00:00

[ Upstream commit 25e2c341e7818a394da9abc403716278ee646014 ] Access card->dev only after checking whether's its valid. Signed-off-by: Julian Wiedmann Reviewed-by: Ursula Braun Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: unbreak OSM and OSN support

2017-06-07T10:09:59+00:00

[ Upstream commit 2d2ebb3ed0c6acfb014f98e427298673a5d07b82 ] commit b4d72c08b358 ("qeth: bridgeport support - basic control") broke the support for OSM and OSN devices as follows: As OSM and OSN are L2 only, qeth_core_probe_device() does an early setup by loading the l2 discipline and calling qeth_l2_probe_device(). In this context, adding the l2-specific bridgeport sysfs attributes via qeth_l2_create_device_attributes() hits a BUG_ON in fs/sysfs/group.c, since the basic sysfs infrastructure for the device hasn't been established yet. Note that OSN actually has its own unique sysfs attributes (qeth_osn_devtype), so the additional attributes shouldn't be created at all. For OSM, add a new qeth_l2_devtype that contains all the common and l2-specific sysfs attributes. When qeth_core_probe_device() does early setup for OSM or OSN, assign the corresponding devtype so that the ccwgroup probe code creates the full set of sysfs attributes. This allows us to skip qeth_l2_create_device_attributes() in case of an early setup. Any device that can't do early setup will initially have only the generic sysfs attributes, and when it's probed later qeth_l2_probe_device() adds the l2-specific attributes. If an early-setup device is removed (by calling ccwgroup_ungroup()), device_unregister() will - using the devtype - delete the l2-specific attributes before qeth_l2_remove_device() is called. So make sure to not remove them twice. What complicates the issue is that qeth_l2_probe_device() and qeth_l2_remove_device() is also called on a device when its layer2 attribute changes (ie. its layer mode is switched). For early-setup devices this wouldn't work properly - we wouldn't remove the l2-specific attributes when switching to L3. But switching the layer mode doesn't actually make any sense; we already decided that the device can only operate in L2! So just refuse to switch the layer mode on such devices. Note that OSN doesn't have a layer2 attribute, so we only need to special-case OSM. Based on an initial patch by Ursula Braun. Fixes: b4d72c08b358 ("qeth: bridgeport support - basic control") Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

s390/qeth: handle sysfs error during initialization

2017-06-07T10:09:59+00:00

[ Upstream commit 9111e7880ccf419548c7b0887df020b08eadb075 ] When setting up the device from within the layer discipline's probe routine, creating the layer-specific sysfs attributes can fail. Report this error back to the caller, and handle it by releasing the layer discipline. Signed-off-by: Ursula Braun [jwi: updated commit msg, moved an OSN change to a subsequent patch] Signed-off-by: Julian Wiedmann Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

2017-04-06T03:17:38+00:00

Pull networking fixes from David Miller: 1) Reject invalid updates to netfilter expectation policies, from Pablo Neira Ayuso. 2) Fix memory leak in nfnl_cthelper, from Jeffy Chen. 3) Don't do stupid things if we get a neigh_probe() on a neigh entry whose ops lack a solicit method. From Eric Dumazet. 4) Don't transmit packets in r8152 driver when the carrier is off, from Hayes Wang. 5) Fix ipv6 packet type detection in aquantia driver, from Pavel Belous. 6) Don't write uninitialized data into hw registers in bna driver, from Arnd Bergmann. 7) Fix locking in ping_unhash(), from Eric Dumazet. 8) Make BPF verifier range checks able to understand certain sequences emitted by LLVM, from Alexei Starovoitov. 9) Fix use after free in ipconfig, from Mark Rutland. 10) Fix refcount leak on force commit in openvswitch, from Jarno Rajahalme. 11) Fix various overflow checks in AF_PACKET, from Andrey Konovalov. 12) Fix endianness bug in be2net driver, from Suresh Reddy. 13) Don't forget to wake TX queues when processing a timeout, from Grygorii Strashko. 14) ARP header on-stack storage is wrong in flow dissector, from Simon Horman. 15) Lost retransmit and reordering SNMP stats in TCP can be underreported. From Yuchung Cheng. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (82 commits) nfp: fix potential use after free on xdp prog tcp: fix reordering SNMP under-counting tcp: fix lost retransmit SNMP under-counting sctp: get sock from transport in sctp_transport_update_pmtu net: ethernet: ti: cpsw: fix race condition during open() l2tp: fix PPP pseudo-wire auto-loading bnx2x: fix spelling mistake in macros HW_INTERRUT_ASSERT_SET_* l2tp: take reference on sessions being dumped tcp: minimize false-positives on TCP/GRO check sctp: check for dst and pathmtu update in sctp_packet_config flow dissector: correct size of storage for ARP net: ethernet: ti: cpsw: wake tx queues on ndo_tx_timeout l2tp: take a reference on sessions used in genetlink handlers l2tp: hold session while sending creation notifications l2tp: fix duplicate session creation l2tp: ensure session can't get removed during pppol2tp_session_ioctl() l2tp: fix race in l2tp_recv_common() sctp: use right in and out stream cnt bpf: add various verifier test cases for self-tests bpf, verifier: fix rejection of unaligned access checks for map_value_adj ...

s390/qeth: no ETH header for outbound AF_IUCV

2017-03-24T19:40:00+00:00

With AF_IUCV traffic, the skb passed to hard_start_xmit() has a 14 byte slot at skb->data, intended for an ETH header. qeth_l3_fill_af_iucv_hdr() fills this ETH header... and then immediately moves it to the skb's headroom, where it disappears and is never seen again. But it's still possible for us to return NETDEV_TX_BUSY after the skb has been modified. Since we didn't get a private copy of the skb, the next time the skb is delivered to hard_start_xmit() it no longer has the expected layout (we moved the ETH header to the headroom, so skb->data now starts at the IUCV_TRANS header). So when qeth_l3_fill_af_iucv_hdr() does another round of rebuilding, the resulting qeth header ends up all wrong. On transmission, the buffer is then rejected by the HiperSockets device with SBALF15 = x'04'. When this error is passed back to af_iucv as TX_NOTIFY_UNREACHABLE, it tears down the offending socket. As the ETH header for AF_IUCV serves no purpose, just align the code to what we do for IP traffic on L3 HiperSockets: keep the ETH header at skb->data, and pass down data_offset = ETH_HLEN to qeth_fill_buffer(). When mapping the payload into the SBAL elements, the ETH header is then stripped off. This avoids the skb manipulations in qeth_l3_fill_af_iucv_hdr(), and any buffer re-entering hard_start_xmit() after NETDEV_TX_BUSY is now processed properly. Signed-off-by: Julian Wiedmann Signed-off-by: Ursula Braun Signed-off-by: David S. Miller

s390/qeth: size calculation outbound buffers

2017-03-24T19:39:59+00:00

Depending on the device type, hard_start_xmit() builds different output buffer formats. For instance with HiperSockets, on both L2 and L3 we strip the ETH header from the skb - L3 doesn't need it, and L2 carries it in the buffer's header element. For this, we pass data_offset = ETH_HLEN all the way down to __qeth_fill_buffer(), where skb->data is then adjusted accordingly. But the initial size calculation still considers the *full* skb length (including the ETH header). So qeth_get_elements_no() can erroneously reject a skb as too big, even though it would actually fit into an output buffer once the ETH header has been trimmed off later. Fix this by passing an additional offset to qeth_get_elements_no(), that indicates where in the skb the on-wire data actually begins. Since the current code uses data_offset=-1 for some special handling on OSA, we need to clamp data_offset to 0... On HiperSockets this helps when sending ~MTU-size skbs with weird page alignment. No change for OSA or AF_IUCV. Signed-off-by: Julian Wiedmann Signed-off-by: Ursula Braun Signed-off-by: David S. Miller

s390/pkey: Fix wrong handling of secure key with old MKVP

2017-03-22T07:21:20+00:00

When a secure key with an old Master Key Verification Pattern was given to the pkey_findcard function, there was no responsible card found because only the current MKVP of each card was compared. With this fix also the old MKVP values are considered and so a matching card able to handle the key is reported back to the caller. Signed-off-by: Harald Freudenberger Signed-off-by: Martin Schwidefsky

Merge branch 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

2017-03-03T18:16:38+00:00

Pull sched.h split-up from Ingo Molnar: "The point of these changes is to significantly reduce the header footprint, to speed up the kernel build and to have a cleaner header structure. After these changes the new 's typical preprocessed size goes down from a previous ~0.68 MB (~22K lines) to ~0.45 MB (~15K lines), which is around 40% faster to build on typical configs. Not much changed from the last version (-v2) posted three weeks ago: I eliminated quirks, backmerged fixes plus I rebased it to an upstream SHA1 from yesterday that includes most changes queued up in -next plus all sched.h changes that were pending from Andrew. I've re-tested the series both on x86 and on cross-arch defconfigs, and did a bisectability test at a number of random points. I tried to test as many build configurations as possible, but some build breakage is probably still left - but it should be mostly limited to architectures that have no cross-compiler binaries available on kernel.org, and non-default configurations" * 'WIP.sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (146 commits) sched/headers: Clean up sched/headers: Remove #ifdefs from sched/headers: Remove the include from sched/headers, hrtimer: Remove the include from sched/headers, x86/apic: Remove the header inclusion from sched/headers, timers: Remove the include from sched/headers: Remove from sched/headers: Remove from sched/core: Remove unused prefetch_stack() sched/headers: Remove from sched/headers: Remove the 'init_pid_ns' prototype from sched/headers: Remove from sched/headers: Remove from sched/headers: Remove the runqueue_is_locked() prototype sched/headers: Remove from sched/headers: Remove from sched/headers: Remove from sched/headers: Remove from sched/headers: Remove the include from sched/headers: Remove from ...

Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost

2017-03-02T21:53:13+00:00

Pull vhost updates from Michael Tsirkin: "virtio, vhost: optimizations, fixes Looks like a quiet cycle for vhost/virtio, just a couple of minor tweaks. Most notable is automatic interrupt affinity for blk and scsi. Hopefully other devices are not far behind" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-console: avoid DMA from stack vhost: introduce O(1) vq metadata cache virtio_scsi: use virtio IRQ affinity virtio_blk: use virtio IRQ affinity blk-mq: provide a default queue mapping for virtio device virtio: provide a method to get the IRQ affinity mask for a virtqueue virtio: allow drivers to request IRQ affinity when creating VQs virtio_pci: simplify MSI-X setup virtio_pci: don't duplicate the msix_enable flag in struct pci_dev virtio_pci: use shared interrupts for virtqueues virtio_pci: remove struct virtio_pci_vq_info vhost: try avoiding avail index access when getting descriptor virtio_mmio: expose header to userspace