kernel/linux.git/drivers/s390/scsi, branch v6.3

scsi: zfcp: Trace when request remove fails after qdio send fails

2023-02-22T03:00:51+00:00

When we fail to send a FSF request in 'zfcp_fsf_req_send()' when calling 'zfcp_qdio_send()' we try to remove the request object from our internal hash table again to prevent keeping a stale memory reference. This removal might still - very much theoretically - fail. To store some evidence of when this happens add a new trace record for this case; tag: 'fsrsrmf'. We reuse the 'ZFCP_DBF_HBA_RES' trace ID for this, but mark all fields other then the request ID with ~0, to make fairly obvious that these are invalid values. This faking has to be done because we don't have a valid request object at this point, and can not safely access any of the memory of the old object - we just failed to find it in our hash table, so it might be gone already. Here is an example of a decoded trace record: Timestamp : 2023-02-17-13:09:12:748140 Area : HBA Subarea : 1 Level : - Exception : 000003ff7ff500c2 CPU ID : 0011 Caller : 0x0 Record ID : 1 Tag : fsrsrmf Request ID : 0x0000000080126ab6 Request status : 0xffffffff FSF cmnd : 0xffffffff FSF sequence no: 0xffffffff FSF issued : 2042-09-18-01:53:47:370495 FSF stat : 0xffffffff FSF stat qual : ffffffff ffffffff ffffffff ffffffff Prot stat : 0xffffffff Prot stat qual : ffffffff ffffffff ffffffff ffffffff Port handle : 0xffffffff LUN handle : 0xffffffff This provides at least some basic evidence that this event happened, and what object was affected. Link: https://lore.kernel.org/r/99b8246b2d71b63fa4f9c56333e2037502f7f5af.1677000450.git.bblock@linux.ibm.com Signed-off-by: Benjamin Block Reviewed-by: Steffen Maier Signed-off-by: Martin K. Petersen

scsi: zfcp: Change the type of all fsf request id fields and variables to u64

2023-02-22T03:00:51+00:00

We use different integer types throughout zfcp to store the FSF request ID and related values; some places use 'unsigned long' and others 'u64'. On s390x these are effectively the same type, but this might cause confusions and is generally inconsistent. The specification for the used hardware specifies this value as a 64-bit number, and ultimately we use this value to communicate with the hardware, so it makes sense to change the type of all these variables to 'u64' where we can. The only exception being when we store it in the 'host_scribble' field of a 'struct scsi_cmnd'; for this case we add a build time check to make sure they are compatible. Link: https://lore.kernel.org/r/9c9cbe5acc2b419a22dce2fed847e3db91b60201.1677000450.git.bblock@linux.ibm.com Signed-off-by: Benjamin Block Reviewed-by: Steffen Maier Signed-off-by: Martin K. Petersen

scsi: zfcp: Make the type for accessing request hashtable buckets size_t

2023-02-22T03:00:51+00:00

The appropriate type for array indices is 'size_t' and the current implementation in 'zfcp_reqlist.h' mixes 'int' and 'unsigned int' in different places to access the hashtable buckets of our internal request hash table. To prevent any confusion, change all places to 'size_t'. Link: https://lore.kernel.org/r/64afe93f6263c6b07815937826cd7d5fc4f1a674.1677000450.git.bblock@linux.ibm.com Signed-off-by: Benjamin Block Reviewed-by: Steffen Maier Signed-off-by: Martin K. Petersen

Merge tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random

2022-12-13T00:22:22+00:00

Pull random number generator updates from Jason Donenfeld: - Replace prandom_u32_max() and various open-coded variants of it, there is now a new family of functions that uses fast rejection sampling to choose properly uniformly random numbers within an interval: get_random_u32_below(ceil) - [0, ceil) get_random_u32_above(floor) - (floor, U32_MAX] get_random_u32_inclusive(floor, ceil) - [floor, ceil] Coccinelle was used to convert all current users of prandom_u32_max(), as well as many open-coded patterns, resulting in improvements throughout the tree. I'll have a "late" 6.1-rc1 pull for you that removes the now unused prandom_u32_max() function, just in case any other trees add a new use case of it that needs to converted. According to linux-next, there may be two trivial cases of prandom_u32_max() reintroductions that are fixable with a 's/.../.../'. So I'll have for you a final conversion patch doing that alongside the removal patch during the second week. This is a treewide change that touches many files throughout. - More consistent use of get_random_canary(). - Updates to comments, documentation, tests, headers, and simplification in configuration. - The arch_get_random*_early() abstraction was only used by arm64 and wasn't entirely useful, so this has been replaced by code that works in all relevant contexts. - The kernel will use and manage random seeds in non-volatile EFI variables, refreshing a variable with a fresh seed when the RNG is initialized. The RNG GUID namespace is then hidden from efivarfs to prevent accidental leakage. These changes are split into random.c infrastructure code used in the EFI subsystem, in this pull request, and related support inside of EFISTUB, in Ard's EFI tree. These are co-dependent for full functionality, but the order of merging doesn't matter. - Part of the infrastructure added for the EFI support is also used for an improvement to the way vsprintf initializes its siphash key, replacing an sleep loop wart. - The hardware RNG framework now always calls its correct random.c input function, add_hwgenerator_randomness(), rather than sometimes going through helpers better suited for other cases. - The add_latent_entropy() function has long been called from the fork handler, but is a no-op when the latent entropy gcc plugin isn't used, which is fine for the purposes of latent entropy. But it was missing out on the cycle counter that was also being mixed in beside the latent entropy variable. So now, if the latent entropy gcc plugin isn't enabled, add_latent_entropy() will expand to a call to add_device_randomness(NULL, 0), which adds a cycle counter, without the absent latent entropy variable. - The RNG is now reseeded from a delayed worker, rather than on demand when used. Always running from a worker allows it to make use of the CPU RNG on platforms like S390x, whose instructions are too slow to do so from interrupts. It also has the effect of adding in new inputs more frequently with more regularity, amounting to a long term transcript of random values. Plus, it helps a bit with the upcoming vDSO implementation (which isn't yet ready for 6.2). - The jitter entropy algorithm now tries to execute on many different CPUs, round-robining, in hopes of hitting even more memory latencies and other unpredictable effects. It also will mix in a cycle counter when the entropy timer fires, in addition to being mixed in from the main loop, to account more explicitly for fluctuations in that timer firing. And the state it touches is now kept within the same cache line, so that it's assured that the different execution contexts will cause latencies. * tag 'random-6.2-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: (23 commits) random: include in the right header random: align entropy_timer_state to cache line random: mix in cycle counter when jitter timer fires random: spread out jitter callback to different CPUs random: remove extraneous period and add a missing one in comments efi: random: refresh non-volatile random seed when RNG is initialized vsprintf: initialize siphash key using notifier random: add back async readiness notifier random: reseed in delayed work rather than on-demand random: always mix cycle counter in add_latent_entropy() hw_random: use add_hwgenerator_randomness() for early entropy random: modernize documentation comment on get_random_bytes() random: adjust comment to account for removed function random: remove early archrandom abstraction random: use random.trust_{bootloader,cpu} command line option only stackprotector: actually use get_random_canary() stackprotector: move get_random_canary() into stackprotector.h treewide: use get_random_u32_inclusive() when possible treewide: use get_random_u32_{above,below}() instead of manual loop treewide: use get_random_u32_below() instead of deprecated function ...

treewide: use get_random_u32_below() instead of deprecated function

2022-11-18T01:15:15+00:00

This is a simple mechanical transformation done by: @@ expression E; @@ - prandom_u32_max + get_random_u32_below (E) Reviewed-by: Kees Cook Reviewed-by: Greg Kroah-Hartman Acked-by: Darrick J. Wong # for xfs Reviewed-by: SeongJae Park # for damon Reviewed-by: Jason Gunthorpe # for infiniband Reviewed-by: Russell King (Oracle) # for arm Acked-by: Ulf Hansson # for mmc Signed-off-by: Jason A. Donenfeld

scsi: zfcp: Fix double free of FSF request when qdio send fails

2022-11-17T17:51:06+00:00

We used to use the wrong type of integer in 'zfcp_fsf_req_send()' to cache the FSF request ID when sending a new FSF request. This is used in case the sending fails and we need to remove the request from our internal hash table again (so we don't keep an invalid reference and use it when we free the request again). In 'zfcp_fsf_req_send()' we used to cache the ID as 'int' (signed and 32 bit wide), but the rest of the zfcp code (and the firmware specification) handles the ID as 'unsigned long'/'u64' (unsigned and 64 bit wide [s390x ELF ABI]). For one this has the obvious problem that when the ID grows past 32 bit (this can happen reasonably fast) it is truncated to 32 bit when storing it in the cache variable and so doesn't match the original ID anymore. The second less obvious problem is that even when the original ID has not yet grown past 32 bit, as soon as the 32nd bit is set in the original ID (0x80000000 = 2'147'483'648) we will have a mismatch when we cast it back to 'unsigned long'. As the cached variable is of a signed type, the compiler will choose a sign-extending instruction to load the 32 bit variable into a 64 bit register (e.g.: 'lgf %r11,188(%r15)'). So once we pass the cached variable into 'zfcp_reqlist_find_rm()' to remove the request again all the leading zeros will be flipped to ones to extend the sign and won't match the original ID anymore (this has been observed in practice). If we can't successfully remove the request from the hash table again after 'zfcp_qdio_send()' fails (this happens regularly when zfcp cannot notify the adapter about new work because the adapter is already gone during e.g. a ChpID toggle) we will end up with a double free. We unconditionally free the request in the calling function when 'zfcp_fsf_req_send()' fails, but because the request is still in the hash table we end up with a stale memory reference, and once the zfcp adapter is either reset during recovery or shutdown we end up freeing the same memory twice. The resulting stack traces vary depending on the kernel and have no direct correlation to the place where the bug occurs. Here are three examples that have been seen in practice: list_del corruption. next->prev should be 00000001b9d13800, but was 00000000dead4ead. (next=00000001bd131a00) ------------[ cut here ]------------ kernel BUG at lib/list_debug.c:62! monitor event: 0040 ilc:2 [#1] PREEMPT SMP Modules linked in: ... CPU: 9 PID: 1617 Comm: zfcperp0.0.1740 Kdump: loaded Hardware name: ... Krnl PSW : 0704d00180000000 00000003cbeea1f8 (__list_del_entry_valid+0x98/0x140) R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 00000000916d12f1 0000000080000000 000000000000006d 00000003cb665cd6 0000000000000001 0000000000000000 0000000000000000 00000000d28d21e8 00000000d3844000 00000380099efd28 00000001bd131a00 00000001b9d13800 00000000d3290100 0000000000000000 00000003cbeea1f4 00000380099efc70 Krnl Code: 00000003cbeea1e8: c020004f68a7 larl %r2,00000003cc8d7336 00000003cbeea1ee: c0e50027fd65 brasl %r14,00000003cc3e9cb8 #00000003cbeea1f4: af000000 mc 0,0 >00000003cbeea1f8: c02000920440 larl %r2,00000003cd12aa78 00000003cbeea1fe: c0e500289c25 brasl %r14,00000003cc3fda48 00000003cbeea204: b9040043 lgr %r4,%r3 00000003cbeea208: b9040051 lgr %r5,%r1 00000003cbeea20c: b9040032 lgr %r3,%r2 Call Trace: [<00000003cbeea1f8>] __list_del_entry_valid+0x98/0x140 ([<00000003cbeea1f4>] __list_del_entry_valid+0x94/0x140) [<000003ff7ff502fe>] zfcp_fsf_req_dismiss_all+0xde/0x150 [zfcp] [<000003ff7ff49cd0>] zfcp_erp_strategy_do_action+0x160/0x280 [zfcp] [<000003ff7ff4a22e>] zfcp_erp_strategy+0x21e/0xca0 [zfcp] [<000003ff7ff4ad34>] zfcp_erp_thread+0x84/0x1a0 [zfcp] [<00000003cb5eece8>] kthread+0x138/0x150 [<00000003cb557f3c>] __ret_from_fork+0x3c/0x60 [<00000003cc4172ea>] ret_from_fork+0xa/0x40 INFO: lockdep is turned off. Last Breaking-Event-Address: [<00000003cc3e9d04>] _printk+0x4c/0x58 Kernel panic - not syncing: Fatal exception: panic_on_oops or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 6b6b6b6b6b6b6000 TEID: 6b6b6b6b6b6b6803 Fault in home space mode while using kernel ASCE. AS:0000000063b10007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 10 PID: 0 Comm: swapper/10 Kdump: loaded Hardware name: ... Krnl PSW : 0404d00180000000 000003ff7febaf8e (zfcp_fsf_reqid_check+0x86/0x158 [zfcp]) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: 5a6f1cfa89c49ac3 00000000aff2c4c8 6b6b6b6b6b6b6b6b 00000000000002a8 0000000000000000 0000000000000055 0000000000000000 00000000a8515800 0700000000000000 00000000a6e14500 00000000aff2c000 000000008003c44c 000000008093c700 0000000000000010 00000380009ebba8 00000380009ebb48 Krnl Code: 000003ff7febaf7e: a7f4003d brc 15,000003ff7febaff8 000003ff7febaf82: e32020000004 lg %r2,0(%r2) #000003ff7febaf88: ec2100388064 cgrj %r2,%r1,8,000003ff7febaff8 >000003ff7febaf8e: e3b020100020 cg %r11,16(%r2) 000003ff7febaf94: a774fff7 brc 7,000003ff7febaf82 000003ff7febaf98: ec280030007c cgij %r2,0,8,000003ff7febaff8 000003ff7febaf9e: e31020080004 lg %r1,8(%r2) 000003ff7febafa4: e33020000004 lg %r3,0(%r2) Call Trace: [<000003ff7febaf8e>] zfcp_fsf_reqid_check+0x86/0x158 [zfcp] [<000003ff7febbdbc>] zfcp_qdio_int_resp+0x6c/0x170 [zfcp] [<000003ff7febbf90>] zfcp_qdio_irq_tasklet+0xd0/0x108 [zfcp] [<0000000061d90a04>] tasklet_action_common.constprop.0+0xdc/0x128 [<000000006292f300>] __do_softirq+0x130/0x3c0 [<0000000061d906c6>] irq_exit_rcu+0xfe/0x118 [<000000006291e818>] do_io_irq+0xc8/0x168 [<000000006292d516>] io_int_handler+0xd6/0x110 [<000000006292d596>] psw_idle_exit+0x0/0xa ([<0000000061d3be50>] arch_cpu_idle+0x40/0xd0) [<000000006292ceea>] default_idle_call+0x52/0xf8 [<0000000061de4fa4>] do_idle+0xd4/0x168 [<0000000061de51fe>] cpu_startup_entry+0x36/0x40 [<0000000061d4faac>] smp_start_secondary+0x12c/0x138 [<000000006292d88e>] restart_int_handler+0x6e/0x90 Last Breaking-Event-Address: [<000003ff7febaf94>] zfcp_fsf_reqid_check+0x8c/0x158 [zfcp] Kernel panic - not syncing: Fatal exception in interrupt or: Unable to handle kernel pointer dereference in virtual kernel address space Failing address: 523b05d3ae76a000 TEID: 523b05d3ae76a803 Fault in home space mode while using kernel ASCE. AS:0000000077c40007 R3:0000000000000024 Oops: 0038 ilc:3 [#1] SMP Modules linked in: ... CPU: 3 PID: 453 Comm: kworker/3:1H Kdump: loaded Hardware name: ... Workqueue: kblockd blk_mq_run_work_fn Krnl PSW : 0404d00180000000 0000000076fc0312 (__kmalloc+0xd2/0x398) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:3 CC:1 PM:0 RI:0 EA:3 Krnl GPRS: ffffffffffffffff 523b05d3ae76abf6 0000000000000000 0000000000092a20 0000000000000002 00000007e49b5cc0 00000007eda8f000 0000000000092a20 00000007eda8f000 00000003b02856b9 00000000000000a8 523b05d3ae76abf6 00000007dd662000 00000007eda8f000 0000000076fc02b2 000003e0037637a0 Krnl Code: 0000000076fc0302: c004000000d4 brcl 0,76fc04aa 0000000076fc0308: b904001b lgr %r1,%r11 #0000000076fc030c: e3106020001a algf %r1,32(%r6) >0000000076fc0312: e31010000082 xg %r1,0(%r1) 0000000076fc0318: b9040001 lgr %r0,%r1 0000000076fc031c: e30061700082 xg %r0,368(%r6) 0000000076fc0322: ec59000100d9 aghik %r5,%r9,1 0000000076fc0328: e34003b80004 lg %r4,952 Call Trace: [<0000000076fc0312>] __kmalloc+0xd2/0x398 [<0000000076f318f2>] mempool_alloc+0x72/0x1f8 [<000003ff8027c5f8>] zfcp_fsf_req_create.isra.7+0x40/0x268 [zfcp] [<000003ff8027f1bc>] zfcp_fsf_fcp_cmnd+0xac/0x3f0 [zfcp] [<000003ff80280f1a>] zfcp_scsi_queuecommand+0x122/0x1d0 [zfcp] [<000003ff800b4218>] scsi_queue_rq+0x778/0xa10 [scsi_mod] [<00000000771782a0>] __blk_mq_try_issue_directly+0x130/0x208 [<000000007717a124>] blk_mq_request_issue_directly+0x4c/0xa8 [<000003ff801302e2>] dm_mq_queue_rq+0x2ea/0x468 [dm_mod] [<0000000077178c12>] blk_mq_dispatch_rq_list+0x33a/0x818 [<000000007717f064>] __blk_mq_do_dispatch_sched+0x284/0x2f0 [<000000007717f44c>] __blk_mq_sched_dispatch_requests+0x1c4/0x218 [<000000007717fa7a>] blk_mq_sched_dispatch_requests+0x52/0x90 [<0000000077176d74>] __blk_mq_run_hw_queue+0x9c/0xc0 [<0000000076da6d74>] process_one_work+0x274/0x4d0 [<0000000076da7018>] worker_thread+0x48/0x560 [<0000000076daef18>] kthread+0x140/0x160 [<000000007751d144>] ret_from_fork+0x28/0x30 Last Breaking-Event-Address: [<0000000076fc0474>] __kmalloc+0x234/0x398 Kernel panic - not syncing: Fatal exception: panic_on_oops To fix this, simply change the type of the cache variable to 'unsigned long', like the rest of zfcp and also the argument for 'zfcp_reqlist_find_rm()'. This prevents truncation and wrong sign extension and so can successfully remove the request from the hash table. Fixes: e60a6d69f1f8 ("[SCSI] zfcp: Remove function zfcp_reqlist_find_safe") Cc: #v2.6.34+ Signed-off-by: Benjamin Block Link: https://lore.kernel.org/r/979f6e6019d15f91ba56182f1aaf68d61bf37fc6.1668595505.git.bblock@linux.ibm.com Reviewed-by: Steffen Maier Signed-off-by: Martin K. Petersen

s390: move from strlcpy with unused retval to strscpy

2022-08-30T20:00:33+00:00

Follow the advice of the below link and prefer 'strscpy' in this subsystem. Conversion is 1:1 because the return value is not used. Generated by a coccinelle script. Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/ Signed-off-by: Wolfram Sang Acked-by: Jakub Kicinski Acked-by: Benjamin Block Acked-by: Alexandra Winter Link: https://lore.kernel.org/r/20220818205948.6360-1-wsa+renesas@sang-engineering.com Link: https://lore.kernel.org/r/20220818210102.7301-1-wsa+renesas@sang-engineering.com [gor@linux.ibm.com: squashed two changes linked above together] Signed-off-by: Vasily Gorbik

scsi: zfcp: Fix missing auto port scan and thus missing target ports

2022-08-01T23:50:00+00:00

Case (1): The only waiter on wka_port->completion_wq is zfcp_fc_wka_port_get() trying to open a WKA port. As such it should only be woken up by WKA port *open* responses, not by WKA port close responses. Case (2): A close WKA port response coming in just after having sent a new open WKA port request and before blocking for the open response with wait_event() in zfcp_fc_wka_port_get() erroneously renders the wait_event a NOP because the close handler overwrites wka_port->status. Hence the wait_event condition is erroneously true and it does not enter blocking state. With non-negligible probability, the following time space sequence happens depending on timing without this fix: user process ERP thread zfcp work queue tasklet system work queue ============ ========== =============== ======= ================= $ echo 1 > online zfcp_ccw_set_online zfcp_ccw_activate zfcp_erp_adapter_reopen msleep scan backoff zfcp_erp_strategy | ... | zfcp_erp_action_cleanup | ... | queue delayed scan_work | queue ns_up_work | ns_up_work: | zfcp_fc_wka_port_get | open wka request | open response | GSPN FC-GS | RSPN FC-GS [NPIV-only] | zfcp_fc_wka_port_put | (--wka->refcount==0) | sched delayed wka->work | ~~~Case (1)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ zfcp_erp_wait flush scan_work | wka->work: | wka->status=CLOSING | close wka request | scan_work: | zfcp_fc_wka_port_get | (wka->status==CLOSING) | wka->status=OPENING | open wka request | wait_event | | close response | | wka->status=OFFLINE | | wake_up /*WRONG*/ ~~~Case (2)~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | wka->work: | wka->status=CLOSING | close wka request zfcp_erp_wait flush scan_work | scan_work: | zfcp_fc_wka_port_get | (wka->status==CLOSING) | wka->status=OPENING | open wka request | close response | wka->status=OFFLINE | wake_up /*WRONG&NOP*/ | wait_event /*NOP*/ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | (wka->status!=ONLINE) | return -EIO | return early open response wka->status=ONLINE wake_up /*NOP*/ So we erroneously end up with no automatic port scan. This is a big problem when it happens during boot. The timing is influenced by v3.19 commit 18f87a67e6d6 ("zfcp: auto port scan resiliency"). Fix it by fully mutually excluding zfcp_fc_wka_port_get() and zfcp_fc_wka_port_offline(). For that to work, we make the latter block until we got the response for a close WKA port. In order not to penalize the system workqueue, we move wka_port->work to our own adapter workqueue. Note that before v2.6.30 commit 828bc1212a68 ("[SCSI] zfcp: Set WKA-port to offline on adapter deactivation"), zfcp did block in zfcp_fc_wka_port_offline() as well, but with a different condition. While at it, make non-functional cleanups to improve code reading in zfcp_fc_wka_port_get(). If we cannot send the WKA port open request, don't rely on the subsequent wait_event condition to immediately let this case pass without blocking. Also don't want to rely on the additional condition handling the refcount to be skipped just to finally return with -EIO. Link: https://lore.kernel.org/r/20220729162529.1620730-1-maier@linux.ibm.com Fixes: 5ab944f97e09 ("[SCSI] zfcp: attach and release SAN nameserver port on demand") Cc: #v2.6.28+ Reviewed-by: Benjamin Block Signed-off-by: Steffen Maier Signed-off-by: Martin K. Petersen

scsi: zfcp: Drop redundant "the" in the comments

2022-07-07T21:33:58+00:00

There is an unexpected word "the" in the comments that needs to be dropped. file: ./drivers/s390/scsi/zfcp_diag.h line: 5 * Definitions for handling diagnostics in the the zfcp device driver. changed to * Definitions for handling diagnostics in the zfcp device driver. Link: https://lore.kernel.org/r/20220621114207.106405-1-jiangjian@cdjrlc.com Link: https://lore.kernel.org/r/4c02fefa19ab46f0f163990bde3ce10bd9c7caf1.1657122360.git.bblock@linux.ibm.com Reviewed-by: Benjamin Block Signed-off-by: Jiang Jian Signed-off-by: Benjamin Block Signed-off-by: Martin K. Petersen

scsi: zfcp: Declare zfcp_sdev_attrs as static

2022-07-07T21:33:58+00:00

These attributes are now only accessed through the zfcp_sysfs_sdev_attr_group. Link: https://lore.kernel.org/r/0791b9149ebfa39e6b8eab093113cd2527dbf3d3.1657122360.git.bblock@linux.ibm.com Fixes: d8d7cf3f7d07 ("scsi: zfcp: Switch to attribute groups") Reviewed-by: Benjamin Block Signed-off-by: Julian Wiedmann Signed-off-by: Benjamin Block Signed-off-by: Martin K. Petersen