kernel/linux.git/drivers/s390/char, branch v6.6.39

Merge tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2023-09-07T17:52:13+00:00

Pull more s390 updates from Heiko Carstens: - A couple of virtual vs physical address confusion fixes - Rework locking in dcssblk driver to address a lockdep warning - Remove support for "noexec" kernel command line option since there is no use case where it would make sense - Simplify kernel mapping setup and get rid of quite a bit of code - Add architecture specific __set_memory_yy() functions which allow us to modify kernel mappings. Unlike the set_memory_xx() variants they take void pointer start and end parameters, which allows using them without the usual casts, and also to use them on areas larger than 8TB. Note that the set_memory_xx() family comes with an int num_pages parameter which overflows with 8TB. This could be addressed by changing the num_pages parameter to unsigned long, however requires to change all architectures, since the module code expects an int parameter (see module_set_memory()). This was indeed an issue since for debug_pagealloc() we call set_memory_4k() on the whole identity mapping. Therefore address this for now with the __set_memory_yy() variant, and address common code later - Use dev_set_name() and also fix memory leak in zcrypt driver error handling - Remove unused lsi_mask from airq_struct - Add warning for invalid kernel mapping requests * tag 's390-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/vmem: do not silently ignore mapping limit s390/zcrypt: utilize dev_set_name() ability to use a formatted string s390/zcrypt: don't leak memory if dev_set_name() fails s390/mm: fix MAX_DMA_ADDRESS physical vs virtual confusion s390/airq: remove lsi_mask from airq_struct s390/mm: use __set_memory() variants where useful s390/set_memory: add __set_memory() variant s390/set_memory: generate all set_memory() functions s390/mm: improve description of mapping permissions of prefix pages s390/amode31: change type of __samode31, __eamode31, etc s390/mm: simplify kernel mapping setup s390: remove "noexec" option s390/vmem: fix virtual vs physical address confusion s390/dcssblk: fix lockdep warning s390/monreader: fix virtual vs physical address confusion

Merge tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

2023-09-01T16:38:00+00:00

Pull tty/serial driver updates from Greg KH: "Here is the big set of tty and serial driver changes for 6.6-rc1. Lots of cleanups in here this cycle, and some driver updates. Short summary is: - Jiri's continued work to make the tty code and apis be a bit more sane with regards to modern kernel coding style and types - cpm_uart driver updates - n_gsm updates and fixes - meson driver updates - sc16is7xx driver updates - 8250 driver updates for different hardware types - qcom-geni driver fixes - tegra serial driver change - stm32 driver updates - synclink_gt driver cleanups - tty structure size reduction All of these have been in linux-next this week with no reported issues. The last bit of cleanups from Jiri and the tty structure size reduction came in last week, a bit late but as they were just style changes and size reductions, I figured they should get into this merge cycle so that others can work on top of them with no merge conflicts" * tag 'tty-6.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (199 commits) tty: shrink the size of struct tty_struct by 40 bytes tty: n_tty: deduplicate copy code in n_tty_receive_buf_real_raw() tty: n_tty: extract ECHO_OP processing to a separate function tty: n_tty: unify counts to size_t tty: n_tty: use u8 for chars and flags tty: n_tty: simplify chars_in_buffer() tty: n_tty: remove unsigned char casts from character constants tty: n_tty: move newline handling to a separate function tty: n_tty: move canon handling to a separate function tty: n_tty: use MASK() for masking out size bits tty: n_tty: make n_tty_data::num_overrun unsigned tty: n_tty: use time_is_before_jiffies() in n_tty_receive_overrun() tty: n_tty: use 'num' for writes' counts tty: n_tty: use output character directly tty: n_tty: make flow of n_tty_receive_buf_common() a bool Revert "tty: serial: meson: Add a earlycon for the T7 SoC" Documentation: devices.txt: Fix minors for ttyCPM* Documentation: devices.txt: Remove ttySIOC* Documentation: devices.txt: Remove ttyIOC* serial: 8250_bcm7271: improve bcm7271 8250 port ...

s390/monreader: fix virtual vs physical address confusion

2023-08-30T09:03:26+00:00

Fix virtual vs physical address confusion (which currently are the same). Acked-by: Heiko Carstens Signed-off-by: Gerald Schaefer Signed-off-by: Heiko Carstens

s390/mm: make virt_to_pfn() a static inline

2023-08-16T13:13:03+00:00

Making virt_to_pfn() a static inline taking a strongly typed (const void *) makes the contract of a passing a pointer of that type to the function explicit and exposes any misuse of the macro virt_to_pfn() acting polymorphic and accepting many types such as (void *), (unitptr_t) or (unsigned long) as arguments without warnings. For symmetry do the same with pfn_to_virt() reflecting the current layout in asm-generic/page.h. Doing this reveals a number of offenders in the arch code and the S390-specific drivers, so just bite the bullet and fix up all of those as well. Signed-off-by: Linus Walleij Reviewed-by: Alexander Gordeev Link: https://lore.kernel.org/r/20230812-virt-to-phys-s390-v2-1-6c40f31fe36f@linaro.org Signed-off-by: Heiko Carstens

tty: make tty_operations::write()'s count size_t

2023-08-11T19:12:46+00:00

Unify with the rest of the code. Use size_t for counts and ssize_t for retval. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230810091510.13006-30-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: propagate u8 data to tty_operations::put_char()

2023-08-11T19:12:46+00:00

Data are now typed as u8. Propagate this change to tty_operations::put_char(). Signed-off-by: "Jiri Slaby (SUSE)" Cc: Geert Uytterhoeven Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: Karsten Keil Cc: Greg Kroah-Hartman Cc: Jiri Slaby Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Mathias Nyman Link: https://lore.kernel.org/r/20230810091510.13006-29-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

tty: propagate u8 data to tty_operations::write()

2023-08-11T19:12:46+00:00

Data are now typed as u8. Propagate this change to tty_operations::write(). Signed-off-by: "Jiri Slaby (SUSE)" Cc: Richard Henderson Cc: Ivan Kokshaysky Cc: Matt Turner Cc: Geert Uytterhoeven Cc: Richard Weinberger Cc: Anton Ivanov Cc: Johannes Berg Cc: Chris Zankel Cc: Max Filippov Cc: Arnd Bergmann Cc: Vaibhav Gupta Cc: Jens Taprogge Cc: Karsten Keil Cc: Scott Branden Cc: Ulf Hansson Cc: "David S. Miller" Cc: Eric Dumazet Cc: Jakub Kicinski Cc: Paolo Abeni Cc: Heiko Carstens Cc: Vasily Gorbik Cc: Alexander Gordeev Cc: Christian Borntraeger Cc: Sven Schnelle Cc: David Lin Cc: Johan Hovold Cc: Alex Elder Cc: Laurentiu Tudor Cc: Jiri Kosina Cc: David Sterba Cc: Shawn Guo Cc: Sascha Hauer Cc: Pengutronix Kernel Team Cc: Fabio Estevam Cc: NXP Linux Team Cc: Arnaud Pouliquen Cc: Oliver Neukum Cc: Mathias Nyman Cc: Marcel Holtmann Cc: Johan Hedberg Cc: Luiz Augusto von Dentz Link: https://lore.kernel.org/r/20230810091510.13006-28-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman

docs: move s390 under arch

2023-07-24T10:12:24+00:00

and fix all in-tree references. Architecture-specific documentation is being moved into Documentation/arch/ as a way of cleaning up the top-level documentation directory and making the docs hierarchy more closely match the source hierarchy. Signed-off-by: Costa Shulyupin Reviewed-by: Tony Krowiak Acked-by: Jonathan Corbet Acked-by: Heiko Carstens Reviewed-by: Philippe Mathieu-Daudé Reviewed-by: Randy Dunlap Link: https://lore.kernel.org/r/20230718045550.495428-1-costa.shul@redhat.com Signed-off-by: Heiko Carstens

s390/mm: remove redundant check against VMEM_MAX_PHYS

2023-07-24T10:12:23+00:00

The value of ident_map_size could never exceed the value of vmemmap as secured by setup_kernel_memory_layout() function: /* make sure identity map doesn't overlay with vmemmap */ ident_map_size = min(ident_map_size, vmemmap_start); Since VMEM_MAX_PHYS macro is set to vmemmap and a newly added range is checked against ident_map_size in add_memory_merged() function anyway, the check against VMEM_MAX_PHYS is redundant. Reviewed-by: Heiko Carstens Signed-off-by: Alexander Gordeev Signed-off-by: Heiko Carstens

s390: add support for user-defined certificates

2023-07-24T10:12:21+00:00

Enable receiving the user-defined certificates from the s390x hypervisor via new diagnose 0x320 calls, and make them available to the Linux root user as 'cert_store_key' type keys in a so-called 'cert_store' keyring. New user-space interfaces: /sys/firmware/cert_store/refresh Writing to this attribute re-fetches certificates via DIAG 0x320 /sys/firmware/cert_store/cs_status Reading from this attribute returns either of: "uninitialized" If no certificate has been retrieved yet "ok" If certificates have been successfully retrieved "failed ()" If certificate retrieval failed with reason code New debug trace areas: /sys/kernel/debug/s390dbf/cert_store_msg /sys/kernel/debug/s390dbf/cert_store_hexdump Usage example: To initiate request for certificates available to the system as root: $ echo 1 > /sys/firmware/cert_store/refresh Upon success the '/sys/firmware/cert_store/cs_status' contains the value 'ok'. $ cat /sys/firmware/cert_store/cs_status ok Get the ID of the keyring 'cert_store': $ keyctl search @us keyring cert_store OR $ keyctl link @us @s; keyctl request keyring cert_store Obtain list of IDs of certificates: $ keyctl rlist Display certificate content as hex-dump: $ keyctl read Read certificate contents as binary data: $ keyctl pipe >cert_data Display certificate description: $ keyctl describe The certificate description has the following format: <64 bytes certificate name in EBCDIC> ':' ':' The certificate description in /proc/keys has certificate name represented in ASCII. Users can read but cannot update the content of the certificate. Signed-off-by: Anastasia Eskova Reviewed-by: Peter Oberparleiter Acked-by: Heiko Carstens Signed-off-by: Heiko Carstens