kernel/linux.git/drivers/s390/block/dasd_devmap.c, branch v6.12.80

s390/dasd: fix error checks in dasd_copy_pair_store()

2024-07-15T16:57:39+00:00

dasd_add_busid() can return an error via ERR_PTR() if an allocation fails. However, two callsites in dasd_copy_pair_store() do not check the result, potentially resulting in a NULL pointer dereference. Fix this by checking the result with IS_ERR() and returning the error up the stack. Fixes: a91ff09d39f9b ("s390/dasd: add copy pair setup") Signed-off-by: Carlos López Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240715112434.2111291-3-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: Remove PRINTK_HEADER and KMSG_COMPONENT definitions

2024-02-08T17:12:01+00:00

PRINTK_HEADER was mainly used to prefix log messages with the module name. Most components don't use this definition anymore. Either because there are no log messages being generated anymore, or pr_*() were replaced by dev_*(), which contains device and component information already. PRINTK_HEADER is also dropped in the function dasd_3990_erp_handle_match_erp() in dasd_3990_erp.c from a panic() call as panic() already provides all relevant information. KMSG_COMPONENT was mainly used to identify a component in a long gone kernel message catalog feature. Remove both definition since they're either not used or alternatives make the code slightly shorter and more readable. Signed-off-by: Jan Höppner Reviewed-by: Stefan Haberland Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240208164248.540985-9-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: Use sysfs_emit() over sprintf()

2024-02-08T17:12:01+00:00

sysfs_emit() should be used in show() functions. There are still a couple of functions that use sprintf(). Replace outstanding occurrences of sprintf() in all show() functions with sysfs_emit(). Signed-off-by: Jan Höppner Reviewed-by: Stefan Haberland Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240208164248.540985-3-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: Simplify uid string generation

2024-02-08T17:12:01+00:00

There are two variants of the device uid string. One containing the virtual device unit information table (vduit) identifying the device as a virtual device located on a real device in a z/VM environment. The other variant does not contain those additional information. Simplify the string generation with a shorter check of an existing vduit embedded in the snprintf() calls. Signed-off-by: Jan Höppner Reviewed-by: Stefan Haberland Signed-off-by: Stefan Haberland Link: https://lore.kernel.org/r/20240208164248.540985-2-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: fix string length handling

2023-09-01T13:47:43+00:00

Building dasd_eckd.o with latest clang reveals this bug: CC drivers/s390/block/dasd_eckd.o drivers/s390/block/dasd_eckd.c:1082:3: warning: 'snprintf' will always be truncated; specified size is 1, but format string expands to at least 11 [-Wfortify-source] 1082 | snprintf(print_uid, sizeof(*print_uid), | ^ drivers/s390/block/dasd_eckd.c:1087:3: warning: 'snprintf' will always be truncated; specified size is 1, but format string expands to at least 10 [-Wfortify-source] 1087 | snprintf(print_uid, sizeof(*print_uid), | ^ Fix this by moving and using the existing UID_STRLEN for the arrays that are being written to. Also rename UID_STRLEN to DASD_UID_STRLEN to clarify its scope. Fixes: 23596961b437 ("s390/dasd: split up dasd_eckd_read_conf") Reviewed-by: Peter Oberparleiter Signed-off-by: Heiko Carstens Tested-by: Nick Desaulniers # build Reported-by: Nathan Chancellor Closes: https://github.com/ClangBuiltLinux/linux/issues/1923 Reviewed-by: Nick Desaulniers Link: https://lore.kernel.org/r/20230828153142.2843753-2-hca@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add aq_timeouts autoquiesce trigger

2023-04-12T01:53:08+00:00

Add a sysfs attribute aq_timeouts that controls after how many timeouts a autoquiesce event might be triggered. The default value is 32768 which is the maximum number of retries for the DASD device driver DASD_RETRIES_MAX. This means that the timeout trigger will never happen. The default value for DASD retries is 255. Setting the value to below 255 will trigger the timeout autoquiesce event before an IO error is generated. Also add the check for the configured amount of timeouts and trigger an autoquiesce event if exceeded. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Reviewed-by: Halil Pasic Link: https://lore.kernel.org/r/20230405142017.2446986-6-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add aq_requeue sysfs attribute

2023-04-12T01:53:08+00:00

Add a sysfs attribute to control if all IO requests will be requeued to the blocklayer in case of an autoquiesce event or not. A value of 1 means that in case of an autoquiesce event all IO requests will be requeued to the blocklayer. A value of 0 means that the device will only be stopped. Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Reviewed-by: Halil Pasic Link: https://lore.kernel.org/r/20230405142017.2446986-5-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: add aq_mask sysfs attribute

2023-04-12T01:53:08+00:00

Add sysfs attribute that controls the DASD autoquiesce feature. The autoquiesce is disabled when 0 is echoed to the attribute. A value greater than 0 will enable the feature. The aq_mask attribute will accept an unsigned integer and the value will be interpreted as bitmask defining the trigger events that will lead to an automatic quiesce. The following autoquiesce triggers will currently be available: DASD_EER_FATALERROR 1 - any final I/O error DASD_EER_NOPATH 2 - no remaining paths for the device DASD_EER_STATECHANGE 3 - a state change interrupt occurred DASD_EER_PPRCSUSPEND 4 - the device is PPRC suspended DASD_EER_NOSPC 5 - there is no space remaining on an ESE device DASD_EER_TIMEOUT 6 - a certain amount of timeouts occurred DASD_EER_STARTIO 7 - the IO start function encountered an error The currently supported maximum value is 255. Bit 31 is reserved for internal usage. Bit 0 is not used. Example: - deactivate autoquiesce $ echo 0 > /sys/bus/ccw/0.0.1234/aq_mask - enable autoquiesce for FATALERROR, NOPATH and TIMEOUT (0000 0000 0000 0000 0000 0000 0100 0110 => 70) $ echo 70 > /sys/bus/ccw/0.0.1234/aq_mask Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Reviewed-by: Halil Pasic Link: https://lore.kernel.org/r/20230405142017.2446986-4-sth@linux.ibm.com Signed-off-by: Jens Axboe

s390/dasd: fix possible buffer overflow in copy_pair_show

2022-11-23T17:37:37+00:00

dasd_copy_relation->entry[] array might be accessed out of bounds if the loop does not break. Fixes: a91ff09d39f9 ("s390/dasd: add copy pair setup") Signed-off-by: Stefan Haberland Reviewed-by: Jan Hoeppner Link: https://lore.kernel.org/r/20221123160719.3002694-5-sth@linux.ibm.com Signed-off-by: Jens Axboe

Merge tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

2022-10-09T20:51:40+00:00

Pull s390 updates from Vasily Gorbik: - Make use of the IBM z16 processor activity instrumentation facility extension to count neural network processor assist operations: add a new PMU device driver so that perf can make use of this. - Rework memcpy_real() to avoid DAT-off mode. - Rework absolute lowcore access code. - Various small fixes and improvements all over the code. * tag 's390-6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/pci: remove unused bus_next field from struct zpci_dev s390/cio: remove unused ccw_device_force_console() declaration s390/pai: Add support for PAI Extension 1 NNPA counters s390/mm: fix no previous prototype warnings in maccess.c s390/mm: uninline copy_oldmem_kernel() function s390/mm,ptdump: add real memory copy page markers s390/mm: rework memcpy_real() to avoid DAT-off mode s390/dump: save IPL CPU registers once DAT is available s390/pci: convert high_memory to physical address s390/smp,ptdump: add absolute lowcore markers s390/smp: rework absolute lowcore access s390/smp: call smp_reinit_ipl_cpu() before scheduler is available s390/ptdump: add missing amode31 markers s390/mm: split lowcore pages with set_memory_4k() s390/mm: remove unused access parameter from do_fault_error() s390/delay: sync comment within __delay() with reality s390: move from strlcpy with unused retval to strscpy