kernel/linux.git/drivers/s390/block/dasd_devmap.c, branch linux-2.6.35.y

[S390] add missing device put

2010-07-19T07:22:50+00:00

The dasd_alias_show function does not return a device reference in case the device is an alias. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky

[S390] dasd: remove uid from devmap

2010-05-17T08:00:16+00:00

Remove the duplicate of the DASD uid from the devmap structure. Use the uid from the device private structure instead. This also removes a lockdep warning complaining about a possible SOFTIRQ-safe -> SOFTIRQ-unsafe lock order. Signed-off-by: Stefan Haberland Signed-off-by: Heiko Carstens Signed-off-by: Martin Schwidefsky

include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h

2010-03-30T13:02:32+00:00

percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo Guess-its-ok-by: Christoph Lameter Cc: Ingo Molnar Cc: Lee Schermerhorn

[S390] dasd: automatic recognition of read-only devices

2010-03-08T11:26:27+00:00

In z/VM it is possible to attach a device as read-only. To prevent unintentional write requests and subsequent I/O errors, we can detect this configuration using the z/VM DIAG 210 interface and set the respective linux block device to read-only as well. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky

[S390] dasd: fix refcounting.

2010-02-26T21:37:32+00:00

The function dasd_device_from_cdev returns a reference to the dasd device and increases the refcount by one. If an exception occurs, the refcount was not decreased in all cases e.g. in dasd_discipline_show. Prevent the offline processing from hang by correcting two functions to decrease the refcount even if an error occured. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky

[S390] pm: dasd power management callbacks.

2009-06-16T08:31:10+00:00

Introduce the power management callbacks to the dasd driver. On suspend the dasd devices are stopped and removed from the focus of alias management. On resume they are reinitialized by rereading the device characteristics and adding the device to the alias management. In case the device has gone away during suspend it will caught in the suspend state with stopped flag set to UNRESUMED. After it appears again the restore function is called again. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky

[S390] dasd: message cleanup

2009-03-26T14:24:05+00:00

Moved some Messages into s390 debug feature and changed remaining messages to use the dev_xxx and pr_xxx macros. Signed-off-by: Stefan Haberland Signed-off-by: Martin Schwidefsky

[S390] dasd: add High Performance FICON support

2009-03-26T14:24:05+00:00

To support High Performance FICON, the DASD device driver has to translate I/O requests into the new transport mode control words (TCW) instead of the traditional (command mode) CCW requests. Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky

[S390] dasd: bus_id -> dev_name() conversion.

2009-02-11T09:37:40+00:00

bus_id usage crept in again; fix it. Signed-off-by: Cornelia Huck Signed-off-by: Heiko Carstens

[S390] dasd: add device attribute to disable blocking on lost paths

2009-01-09T11:15:05+00:00

When the connection between host and storage server is lost, the dasd device driver usually blocks all I/O on affected devices and waits for them to reappear. In some setups however it would be better if the I/O is returned as error so that device can be recovered by some other means, eg. in a raid or multipath setup. Signed-off-by: Holger Smolinski Signed-off-by: Stefan Weinhuber Signed-off-by: Martin Schwidefsky