kernel/linux.git/drivers/rtc, branch v6.13.6

rtc: zynqmp: Fix optional clock name property

2025-02-17T10:36:57+00:00

commit 2a388ff22d2cbfc5cbd628ef085bdcd3b7dc64f5 upstream. Clock description in DT binding introduced by commit f69060c14431 ("dt-bindings: rtc: zynqmp: Add clock information") is talking about "rtc" clock name but driver is checking "rtc_clk" name instead. Because clock is optional property likely in was never handled properly by the driver. Fixes: 07dcc6f9c762 ("rtc: zynqmp: Add calibration set and get support") Signed-off-by: Michal Simek Cc: stable@kernel.org Reviewed-by: Peter Korsgaard Link: https://lore.kernel.org/r/cd5f0c9d01ec1f5a240e37a7e0d85b8dacb3a869.1732723280.git.michal.simek@amd.com Signed-off-by: Alexandre Belloni Signed-off-by: Greg Kroah-Hartman

rtc: loongson: clear TOY_MATCH0_REG in loongson_rtc_isr()

2025-02-08T09:02:08+00:00

[ Upstream commit 09471d8f5b390883eaf21b917c4bf3ced1b8a1df ] The TOY_MATCH0_REG should be cleared to 0 in the RTC interrupt handler, otherwise the interrupt cannot be cleared, which will cause the loongson_rtc_isr() to be triggered multiple times. The previous code cleared TOY_MATCH0_REG in the loongson_rtc_handler(), which is an ACPI interrupt. This did not prevent loongson_rtc_isr() from being triggered multiple times. This commit moves the clearing of TOY_MATCH0_REG to the loongson_rtc_isr() to ensure that the interrupt is properly cleared. Fixes: 1b733a9ebc3d ("rtc: Add rtc driver for the Loongson family chips") Signed-off-by: Ming Wang Reviewed-by: Huacai Chen Reviewed-by: Keguang Zhang # on LS1B Tested-by: Keguang Zhang Link: https://lore.kernel.org/r/20241205114307.1891418-1-wangming01@loongson.cn Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: pcf85063: fix potential OOB write in PCF85063 NVMEM read

2025-02-08T09:02:08+00:00

[ Upstream commit 3ab8c5ed4f84fa20cd16794fe8dc31f633fbc70c ] The nvmem interface supports variable buffer sizes, while the regmap interface operates with fixed-size storage. If an nvmem client uses a buffer size less than 4 bytes, regmap_read will write out of bounds as it expects the buffer to point at an unsigned int. Fix this by using an intermediary unsigned int to hold the value. Fixes: fadfd092ee91 ("rtc: pcf85063: add nvram support") Signed-off-by: Oleksij Rempel Signed-off-by: Ahmad Fatoum Link: https://lore.kernel.org/r/20241218-rtc-pcf85063-stack-corruption-v1-1-12fd0ee0f046@pengutronix.de Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

rtc: tps6594: Fix integer overflow on 32bit systems

2025-02-08T09:02:08+00:00

[ Upstream commit 09c4a610153286cef54d4f0c85398f4e32fc227e ] The problem is this multiply in tps6594_rtc_set_offset() tmp = offset * TICKS_PER_HOUR; The "tmp" variable is an s64 but "offset" is a long in the (-277774)-277774 range. On 32bit systems a long can hold numbers up to approximately two billion. The number of TICKS_PER_HOUR is really large, (32768 * 3600) or roughly a hundred million. When you start multiplying by a hundred million it doesn't take long to overflow the two billion mark. Probably the safest way to fix this is to change the type of TICKS_PER_HOUR to long long because it's such a large number. Fixes: 9f67c1e63976 ("rtc: tps6594: Add driver for TPS6594 RTC") Signed-off-by: Dan Carpenter Link: https://lore.kernel.org/r/1074175e-5ecb-4e3d-b721-347d794caa90@stanley.mountain Signed-off-by: Alexandre Belloni Signed-off-by: Sasha Levin

module: Convert symbol namespace to string literal

2024-12-02T19:34:44+00:00

Clean up the existing export namespace code along the same lines of commit 33def8498fdd ("treewide: Convert macro and uses of __section(foo) to __section("foo")") and for the same reason, it is not desired for the namespace argument to be a macro expansion itself. Scripted using git grep -l -e MODULE_IMPORT_NS -e EXPORT_SYMBOL_NS | while read file; do awk -i inplace ' /^#define EXPORT_SYMBOL_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /^#define MODULE_IMPORT_NS/ { gsub(/__stringify$ns$/, "ns"); print; next; } /MODULE_IMPORT_NS/ { $0 = gensub(/MODULE_IMPORT_NS$([^)]*)$/, "MODULE_IMPORT_NS(\"\\1\")", "g"); } /EXPORT_SYMBOL_NS/ { if ($0 ~ /(EXPORT_SYMBOL_NS[^(]*)$([^,]+),/) { if ($0 !~ /(EXPORT_SYMBOL_NS[^(]*)\(([^,]+), ([^)]+)$/ && $0 !~ /(EXPORT_SYMBOL_NS[^(]*)/ && $0 !~ /^my/) { getline line; gsub(/[[:space:]]*\\$/, ""); gsub(/[[:space:]]/, "", line); $0 = $0 " " line; } $0 = gensub(/(EXPORT_SYMBOL_NS[^(]*)$([^,]+), ([^)]+)$/, "\\1(\\2, \"\\3\")", "g"); } } { print }' $file; done Requested-by: Masahiro Yamada Signed-off-by: Peter Zijlstra (Intel) Link: https://mail.google.com/mail/u/2/#inbox/FMfcgzQXKWgMmjdFwwdsfgxzKpVHWPlc Acked-by: Greg KH Signed-off-by: Linus Torvalds

Merge tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2024-11-30T19:18:16+00:00

Pull RTC updates from Alexandre Belloni: "New drivers: - Amlogic A4 and A5 RTC - Marvell 88PM886 PMIC RTC - Renesas RTCA-3 for Renesas RZ/G3S Driver updates: - ab-eoz9: fix temperature and alarm support - cmos: improve locking behaviour - isl12022: add alarm support - m48t59: improve epoch handling - mt6359: add range - rzn1: fix BCD conversions and simplify driver" * tag 'rtc-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (38 commits) rtc: ab-eoz9: don't fail temperature reads on undervoltage notification rtc: rzn1: reduce register access rtc: rzn1: drop superfluous wday calculation m68k: mvme147, mvme16x: Adopt rtc-m48t59 platform driver rtc: brcmstb-waketimer: don't include 'pm_wakeup.h' directly rtc: m48t59: Use platform_data struct for year offset value rtc: ab-eoz9: fix abeoz9_rtc_read_alarm rtc: rv3028: fix RV3028_TS_COUNT type rtc: rzn1: update Michel's email rtc: rzn1: fix BCD to rtc_time conversion errors rtc: amlogic-a4: fix compile error rtc: amlogic-a4: drop error messages MAINTAINERS: Add an entry for Amlogic RTC driver rtc: support for the Amlogic on-chip RTC dt-bindings: rtc: Add Amlogic A4 and A5 RTC rtc: add driver for Marvell 88PM886 PMIC RTC rtc: check if __rtc_read_time was successful in rtc_timer_do_work() rtc: pcf8563: Switch to regmap rtc: pcf8563: Sort headers alphabetically rtc: abx80x: Fix WDT bit position of the status register ...

rtc: ab-eoz9: don't fail temperature reads on undervoltage notification

2024-11-25T22:34:12+00:00

The undervoltage flags reported by the RTC are useful to know if the time and date are reliable after a reboot. Although the threshold VLOW1 indicates that the thermometer has been shutdown and time compensation is off, it doesn't mean that the temperature readout is currently impossible. As the system is running, the RTC voltage is now fully established and we can read the temperature. Fixes: 67075b63cce2 ("rtc: add AB-RTCMC-32.768kHz-EOZ9 RTC support") Signed-off-by: Maxime Chevallier Link: https://lore.kernel.org/r/20241122101031.68916-3-maxime.chevallier@bootlin.com Signed-off-by: Alexandre Belloni

rtc: rzn1: reduce register access

2024-11-25T22:32:50+00:00

This RTC has special 32bit registers which return multiple of the same 8bit registers at once. Use these to minimize register access. Also, do the to/from BCD conversions right away, so 'tm' always contains values as described in time.h. Signed-off-by: Wolfram Sang Acked-by: Miquel Raynal Link: https://lore.kernel.org/r/20241122101448.4374-3-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni

rtc: rzn1: drop superfluous wday calculation

2024-11-25T22:32:50+00:00

The week register simply counts from 0 to 6 where the numbers do not even represent a specific weekday. So we can adopt 'tm_wday' numbering of the RTC core without converting it. Signed-off-by: Wolfram Sang Link: https://lore.kernel.org/r/20241122101448.4374-2-wsa+renesas@sang-engineering.com Signed-off-by: Alexandre Belloni

Merge tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

2024-11-23T00:19:47+00:00

Pull MFD updates from Lee Jones: - Several drivers, including atmel-flexcom/rk8xx-core, palmas, and tps65010, have undergone minor code improvements to enhance consistency and fix race conditions. - The syscon driver now utilizes the regmap max_register_is_0 capability for consistent register map configuration across syscons of all sizes. - New device support has been added for QCS8300, qcs615, SA8255p, and samsung,s2dos05, expanding the range of compatible hardware. - The cros_ec driver now supports loading cros_ec_ucsi on supported ECs and avoids loading the charger with UCSI, streamlining functionality. - The bd96801 driver now utilizes the more modern maple tree register cache, improving performance. - The da9052-spi driver has undergone a fix to change the read-mask to write-mask, preventing potential issues. - Unused declarations in max77693 have been removed, and support for samsung,s2dos05 has been added, enhancing code clarity and device compatibility. - Error handling in cs42l43 has been fixed to avoid unbalanced regulator put and ensure proper synchronization during driver removal. - The wcd934x driver now uses MODULE_DEVICE_TABLE() instead of MODULE_ALIAS(), improving code consistency. - Documentation for qcom,tcsr, syscon, and atmel-smc has been updated and reorganized for better clarity and maintainability. - The intel_soc_pmic_bxtwc driver has undergone significant improvements, including the use of IRQ domains for various devices, fixing IRQ domain names duplication, and code refactoring for better consistency and maintainability. - The ipaq-micro driver has received a fix for a missing break statement in the default case, enhancing code robustness. - Support for the AXP323 PMIC has been added to the axp20x driver, along with ensuring a clear relationship between IDs and model names, and allowing multiple regulators, broadening hardware compatibility. - The cs42l43 driver now disables IRQs during suspend for improved power management. - The adp5585 driver has reduced its dependencies by dropping the obsolete dependency on COMPILE_TEST. - Initial support for the MT6328 PMIC has been added to the mt6397 driver, expanding the range of supported hardware. - The rtc-bd70528 driver has been simplified by dropping the IC name from IRQ, improving code readability. - Documentation for qcom,spmi-pmic, ti,twl, and zii,rave-sp has been updated to enhance clarity and incorporate new features. - The rt5033 driver has received a fix for a missing regmap_del_irq_chip() in the error handling path. - New device support has been added for MSM8917, and the intel_soc_pmic_crc driver now supports non-ACPI instantiated i2c_client. - The 88pm886 driver has added support for the RTC cell, and the tqmx86 driver has improved its GPIO IRQ setup and added I2C IRQ support, increasing functionality. - The sprd,sc2731 DT schema has been updated and converted to YAML format for better readability and maintainability. * tag 'mfd-next-6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (62 commits) dt-bindings: mfd: bd71828: Use charger resistor in mOhm instead of MOhm dt-bindings: mfd: sprd,sc2731: Convert to YAML mfd: tqmx86: Add I2C IRQ support mfd: tqmx86: Make IRQ setup errors non-fatal mfd: tqmx86: Refactor GPIO IRQ setup mfd: tqmx86: Improve gpio_irq module parameter description mfd: tqmx86: Add board definitions for TQMx120UC, TQMx130UC and TQMxE41S mfd: 88pm886: Add the RTC cell dt-bindings: mfd: Add Realtek RTL9300 switch peripherals mfd: intel_soc_pmic_crc: Add support for non ACPI instantiated i2c_client mfd: intel_soc_pmic_*: Consistently use filename as driver name dt-bindings: mfd: qcom,tcsr: Add compatible for MSM8917 mfd: rt5033: Fix missing regmap_del_irq_chip() mfd: cgbc-core: Fix error handling paths in cgbc_init_device() dt-bindings: mfd: aspeed: Support for AST2700 mfd: Switch back to struct platform_driver::remove() dt-bindings: mfd: qcom,spmi-pmic: Document PMICs added in SM8750 mfd: rtc: bd7xxxx Drop IC name from IRQ mfd: mt6397: Add initial support for MT6328 mfd: adp5585: Drop obsolete dependency on COMPILE_TEST ...