kernel/linux.git/drivers/rtc, branch v3.0.35

drivers/rtc/rtc-pl031.c: configure correct wday for 2000-01-01

2012-06-01T07:12:57+00:00

commit c0a5f4a05af588a0f9951f8d24e2564b09501918 upstream. The reset date of the ST Micro version of PL031 is 2000-01-01. The correct weekday for 2000-01-01 is saturday, but pl031 is initialized to sunday. This may lead to alarm malfunction, so configure the correct wday if RTC_DR indicates reset. Signed-off-by: Rajkumar Kasirajan Signed-off-by: Linus Walleij Cc: Mattias Wallin Cc: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-pl031.c: enable clock on all ST variants

2012-04-22T23:21:23+00:00

commit 2f3972168353d355854d6381f1f360ce83b723e5 upstream. The ST variants of the PL031 all require bit 26 in the control register to be set before they work properly. Discovered this when testing on the Nomadik board where it would suprisingly just stand still. Signed-off-by: Linus Walleij Cc: Mian Yousaf Kaukab Cc: Alessandro Rubini Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: Disable the alarm in the hardware (v2)

2012-04-02T16:27:10+00:00

commit 41c7f7424259ff11009449f87c95656f69f9b186 upstream. Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. The original version of this patch was reverted. This version disables the irq directly instead of setting a disabled timer in the future. Cc: John Stultz Signed-off-by: Rabin Vincent [Merged in the second revision from Rabin] Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

drivers/rtc/interface.c: fix alarm rollover when day or month is out-of-range

2012-01-26T01:24:33+00:00

commit e74a8f2edb92cb690b467cea0ab652c509e9f624 upstream. Commit f44f7f96a20a ("RTC: Initialize kernel state from RTC") introduced a potential infinite loop. If an alarm time contains a wildcard month and an invalid day (> 31), or a wildcard year and an invalid month (>= 12), the loop searching for the next matching date will never terminate. Treat the invalid values as wildcards. Fixes , Reported-by: leo weppelman Reported-by: "P. van Gaans" Signed-off-by: Ben Hutchings Signed-off-by: Jonathan Nieder Cc: Mark Brown Cc: Marcelo Roberto Jimenez Cc: Thomas Gleixner Cc: John Stultz Acked-by: Alessandro Zummo Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

Revert "rtc: Disable the alarm in the hardware"

2012-01-06T22:14:13+00:00

commit 157e8bf8b4823bfcdefa6c1548002374b61f61df upstream. This reverts commit c0afabd3d553c521e003779c127143ffde55a16f. It causes failures on Toshiba laptops - instead of disabling the alarm, it actually seems to enable it on the affected laptops, resulting in (for example) the laptop powering on automatically five minutes after shutdown. There's a patch for it that appears to work for at least some people, but it's too late to play around with this, so revert for now and try again in the next merge window. See for example http://bugs.debian.org/652869 Reported-and-bisected-by: Andreas Friedrich (Toshiba Tecra) Reported-by: Antonio-M. Corbi Bellot (Toshiba Portege R500) Reported-by: Marco Santos (Toshiba Portege Z830) Reported-by: Christophe Vu-Brugier (Toshiba Portege R830) Cc: Jonathan Nieder Requested-by: John Stultz Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: m41t80: Workaround broken alarm functionality

2012-01-06T22:13:45+00:00

commit c3b79770e51ab1fd4201f3b54edf30113b9ce74f upstream. The m41t80 driver can read and set the alarm, but it doesn't seem to have a functional alarm irq. This causes failures when the generic core sees alarm functions, but then cannot use them properly for things like UIE mode. Disabling the alarm functions allows proper error reporting, and possible fallback to emulated modes. Once someone fixes the alarm irq functionality, this can be restored. CC: Matt Turner CC: Nico Macrionitis CC: Atsushi Nemoto Reported-by: Matt Turner Reported-by: Nico Macrionitis Tested-by: Nico Macrionitis Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

rtc: Disable the alarm in the hardware

2011-12-09T16:52:48+00:00

commit c0afabd3d553c521e003779c127143ffde55a16f upstream. Currently, the RTC code does not disable the alarm in the hardware. This means that after a sequence such as the one below (the files are in the RTC sysfs), the box will boot up after 2 minutes even though we've asked for the alarm to be turned off. # echo $((`cat since_epoch`)+120) > wakealarm # echo 0 > wakealarm # poweroff Fix this by disabling the alarm when there are no timers to run. Cc: John Stultz Signed-off-by: Rabin Vincent Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

rtc: Fix RTC PIE frequency limit

2011-10-03T18:40:08+00:00

commit 938f97bcf1bdd1b681d5d14d1d7117a2e22d4434 upstream. Thomas earlier submitted a fix to limit the RTC PIE freq, but picked 5000Hz out of the air. Willy noticed that we should instead use the 8192Hz max from the rtc man documentation. Cc: Willy Tarreau Cc: Thomas Gleixner Signed-off-by: John Stultz Signed-off-by: Greg Kroah-Hartman

drivers/rtc/rtc-tegra.c: properly initialize spinlock

2011-08-05T04:58:32+00:00

commit e57ee01750c4954fd0b5e3c6109cd4b870880eb9 upstream. Using __SPIN_LOCK_UNLOCKED for a dynamically allocated lock is wrong and breaks the build with PREEMPT_RT_FULL. Signed-off-by: Uwe Kleine-König Cc: Andrew Chew Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman

rtc: limit frequency

2011-08-05T04:58:32+00:00

commit 431e2bcc371016824f419baa745f82388258f3ee upstream. Due to the hrtimer self rearming mode a user can DoS the machine simply because it's starved by hrtimer events. The RTC hrtimer is self rearming. We really need to limit the frequency to something sensible. Signed-off-by: Thomas Gleixner Cc: John Stultz Cc: Ingo Molnar Cc: Ben Greear Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds Signed-off-by: Greg Kroah-Hartman