kernel/linux.git/drivers/rtc/rtc-cmos.c, branch v5.9.12

Merge tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2020-04-04T17:38:01+00:00

Pull RTC updates from Alexandre Belloni: "More cleanup this cycle, with the final goal of removing the rtc_time_to_tm and rtc_tm_to_time wrappers. All the drivers that have been modified for this now are ready for the end of times (whether it happens in 2033, 2038, 2106, 2127 or even 4052). There is also a single new driver and the usual fixes and features. Summary: Subsystem: - The rtc_time_to_tm and rtc_tm_to_time wrappers have finally been removed and only the 64bit version remain. - hctosys now works with drivers compiled as modules New driver: - MediaTek MT2712 SoC based RTC Drivers: - set range for 88pm860x, au1xxx, cpcap, da9052, davinci, ds1305, ds1374, mcp5121, pl030, pl031, pm8xxx, puv3, sa1100, sirfsoc, starfire, sun6i - ds1307: DS1388 oscillator failure detection and watchdog support - jz4740: JZ4760 support - pcf85063: clock out pin support - sun6i: external 32k oscillator is now optional, the range is now handled by the core, providing a solution for 2034" * tag 'rtc-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (87 commits) rtc: ds1307: check for failed memory allocation on wdt rtc: class: remove redundant assignment to variable err rtc: remove rtc_time_to_tm and rtc_tm_to_time rtc: sun6i: let the core handle rtc range rtc: sun6i: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: ds1307: add support for watchdog timer on ds1388 rtc: da9052: switch to rtc_time64_to_tm/rtc_tm_to_time64 rtc: da9052: set range rtc: da9052: convert to devm_rtc_allocate_device rtc: imx-sc: Align imx sc msg structs to 4 rtc: fsl-ftm-alarm: report alarm to core rtc: pcf85063: Add pcf85063 clkout control to common clock framework rtc: make definitions in include/uapi/linux/rtc.h actually useful for user space rtc: class: avoid unnecessary lookup in hctosys dt-bindings: rtc: Convert and update jz4740-rtc doc to YAML rtc: jz4740: Rename vendor-specific DT properties rtc: jz4740: Add support for JZ4760 SoC rtc: class: support hctosys from modular RTC drivers rtc: pm8xxx: clear alarm register when alarm is not enabled rtc: omap: drop unused dt-bindings header ...

rtc: cmos: remove useless cast for driver_name

2020-03-17T17:32:07+00:00

Now the pnp_driver name is "const char *", there are no need to cast driver_name. Signed-off-by: Corentin Labbe Signed-off-by: Rafael J. Wysocki

rtc: cmos: Use spin_lock_irqsave() in cmos_interrupt()

2020-03-03T10:56:42+00:00

cmos_interrupt() isn't always called from hardirq context, so we must use spin_lock_irqsave() & co. ================================ WARNING: inconsistent lock state 5.6.0-rc2-CI-CI_DRM_7981+ #1 Tainted: G U -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. rtcwake/4315 [HC0[0]:SC0[0]:HE1:SE1] takes: ffffffff82635198 (rtc_lock){?...}, at: cmos_interrupt+0x18/0x100 {IN-HARDIRQ-W} state was registered at: lock_acquire+0xa7/0x1c0 _raw_spin_lock+0x2a/0x40 cmos_interrupt+0x18/0x100 rtc_handler+0x75/0xc0 acpi_ev_fixed_event_detect+0xf9/0x132 acpi_ev_sci_xrupt_handler+0xb/0x28 acpi_irq+0x13/0x30 __handle_irq_event_percpu+0x41/0x2c0 handle_irq_event_percpu+0x2b/0x70 handle_irq_event+0x2f/0x50 handle_fasteoi_irq+0x8e/0x150 do_IRQ+0x7e/0x160 ret_from_intr+0x0/0x35 mwait_idle+0x7e/0x200 do_idle+0x1bb/0x260 cpu_startup_entry+0x14/0x20 start_secondary+0x15f/0x1b0 secondary_startup_64+0xa4/0xb0 irq event stamp: 42003 hardirqs last enabled at (42003): [] _raw_spin_unlock_irqrestore+0x47/0x60 hardirqs last disabled at (42002): [] _raw_spin_lock_irqsave+0xd/0x50 softirqs last enabled at (41848): [] __do_softirq+0x385/0x47f softirqs last disabled at (41841): [] irq_exit+0xba/0xc0 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(rtc_lock); lock(rtc_lock); *** DEADLOCK *** 6 locks held by rtcwake/4315: #0: ffff888175dc9408 (sb_writers#5){.+.+}, at: vfs_write+0x1a4/0x1d0 #1: ffff88817406ca80 (&of->mutex){+.+.}, at: kernfs_fop_write+0xdd/0x1b0 #2: ffff888179be85e0 (kn->count#236){.+.+}, at: kernfs_fop_write+0xe6/0x1b0 #3: ffffffff82641e00 (system_transition_mutex){+.+.}, at: pm_suspend+0xb3/0x3b0 #4: ffffffff826b3ee0 (acpi_scan_lock){+.+.}, at: acpi_suspend_begin+0x47/0x80 #5: ffff888178fc3960 (&dev->mutex){....}, at: device_resume+0x92/0x1c0 stack backtrace: CPU: 3 PID: 4315 Comm: rtcwake Tainted: G U 5.6.0-rc2-CI-CI_DRM_7981+ #1 Hardware name: Google Soraka/Soraka, BIOS MrChromebox-4.10 08/25/2019 Call Trace: dump_stack+0x71/0x9b mark_lock+0x49a/0x500 ? print_shortest_lock_dependencies+0x200/0x200 __lock_acquire+0x6d4/0x15d0 ? __lock_acquire+0x460/0x15d0 lock_acquire+0xa7/0x1c0 ? cmos_interrupt+0x18/0x100 _raw_spin_lock+0x2a/0x40 ? cmos_interrupt+0x18/0x100 cmos_interrupt+0x18/0x100 cmos_resume+0x1fd/0x290 ? __acpi_pm_set_device_wakeup+0x24/0x100 pnp_bus_resume+0x5e/0x90 ? pnp_bus_suspend+0x10/0x10 dpm_run_callback+0x64/0x280 device_resume+0xd4/0x1c0 ? dpm_watchdog_set+0x60/0x60 dpm_resume+0x106/0x410 ? dpm_resume_early+0x38c/0x3e0 dpm_resume_end+0x8/0x10 suspend_devices_and_enter+0x16f/0xbe0 ? rcu_read_lock_sched_held+0x4d/0x80 pm_suspend+0x344/0x3b0 state_store+0x78/0xe0 kernfs_fop_write+0x112/0x1b0 vfs_write+0xb9/0x1d0 ksys_write+0x9f/0xe0 do_syscall_64+0x4f/0x220 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff934307154 Code: 89 02 48 c7 c0 ff ff ff ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 8d 05 b1 07 2e 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 f3 c3 66 90 41 54 55 49 89 d4 53 48 89 f5 RSP: 002b:00007ffe2647c168 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000004 RCX: 00007ff934307154 RDX: 0000000000000004 RSI: 000055de3ec4e5a0 RDI: 000000000000000a RBP: 000055de3ec4e5a0 R08: 000055de3ec4c5e0 R09: 00007ff9349f3740 R10: 000055de3ec4a010 R11: 0000000000000246 R12: 000055de3ec4c500 R13: 0000000000000004 R14: 00007ff9345df2a0 R15: 00007ff9345de760 Fixes: c6d3a278cc12 ("rtc: cmos: acknowledge ACPI driven wake alarms upon resume") Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Signed-off-by: Ville Syrjälä Link: https://lore.kernel.org/r/20200221144739.11746-1-ville.syrjala@linux.intel.com Signed-off-by: Alexandre Belloni

rtc: cmos: Refactor code by using the new dmi_get_bios_year() helper

2020-01-25T20:55:14+00:00

Refactor code by using the new dmi_get_bios_year() helper instead of open coding its functionality. This also makes logic slightly clearer. No changes intended. Cc: Hans de Goede Signed-off-by: Andy Shevchenko Tested-by: Guilherme G. Piccoli Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20200123131437.28157-3-andriy.shevchenko@linux.intel.com Signed-off-by: Alexandre Belloni

rtc: cmos: Use predefined value for RTC IRQ on legacy x86

2020-01-25T20:55:12+00:00

When legacy devices are present on x86 machine, the RTC IRQ has a dedicated pre-defined value. Use it instead of hard coded number. Cc: Hans de Goede Signed-off-by: Andy Shevchenko Tested-by: Guilherme G. Piccoli Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20200123131437.28157-2-andriy.shevchenko@linux.intel.com Signed-off-by: Alexandre Belloni

rtc: cmos: Stop using shared IRQ

2020-01-25T20:54:57+00:00

As reported by Guilherme G. Piccoli: ---8<---8<---8<--- The rtc-cmos interrupt setting was changed in the commit 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch") in order to allow shared interrupts; according to that commit's description, some machine got kernel warnings due to the interrupt line being shared between rtc-cmos and other hardware, and rtc-cmos didn't allow IRQ sharing that time. After the aforementioned commit though it was observed a huge increase in lost HPET interrupts in some systems, observed through the following kernel message: [...] hpet1: lost 35 rtc interrupts After investigation, it was narrowed down to the shared interrupts usage when having the kernel option "irqpoll" enabled. In this case, all IRQ handlers are called for non-timer interrupts, if such handlers are setup in shared IRQ lines. The rtc-cmos IRQ handler could be set to hpet_rtc_interrupt(), which will produce the kernel "lost interrupts" message after doing work - lots of readl/writel to HPET registers, which are known to be slow. Although "irqpoll" is not a default kernel option, it's used in some contexts, one being the kdump kernel (which is an already "impaired" kernel usually running with 1 CPU available), so the performance burden could be considerable. Also, the same issue would happen (in a shorter extent though) when using "irqfixup" kernel option. In a quick experiment, a virtual machine with uptime of 2 minutes produced >300 calls to hpet_rtc_interrupt() when "irqpoll" was set, whereas without sharing interrupts this number reduced to 1 interrupt. Machines with more hardware than a VM should generate even more unnecessary HPET interrupts in this scenario. ---8<---8<---8<--- After looking into the rtc-cmos driver history and DSDT table from the Microsoft Surface 3, we may notice that Hans de Goede submitted a correct fix (see dependency below). Thus, we simply revert the culprit commit. Fixes: 079062b28fb4 ("rtc: cmos: prevent kernel warning on IRQ flags mismatch") Depends-on: a1e23a42f1bd ("rtc: cmos: Do not assume irq 8 for rtc when there are no legacy irqs") Reported-by: Guilherme G. Piccoli Cc: Hans de Goede Signed-off-by: Andy Shevchenko Tested-by: Guilherme G. Piccoli Reviewed-by: Hans de Goede Link: https://lore.kernel.org/r/20200123131437.28157-1-andriy.shevchenko@linux.intel.com Signed-off-by: Alexandre Belloni

treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152

2019-05-30T18:26:32+00:00

Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner Reviewed-by: Allison Randal Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman

rtc: cmos: Do not export alarm rtc_ops when we do not support alarms

2018-11-07T16:13:55+00:00

When there is no IRQ configured for the RTC, the rtc-cmos code does not support alarms, all alarm rtc_ops fail with -EIO / -EINVAL. The rtc-core expects a rtc driver which does not support rtc alarms to not have alarm ops at all. Otherwise the wakealarm sysfs attr will read as empty rather then returning an error, making it impossible for userspace to find out beforehand if alarms are supported. A system without an IRQ for the RTC before this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm [root@localhost ~]# After this patch: [root@localhost ~]# cat /sys/class/rtc/rtc0/wakealarm cat: /sys/class/rtc/rtc0/wakealarm: No such file or directory [root@localhost ~]# This fixes gnome-session + systemd trying to use suspend-then-hibernate, which causes systemd to abort the suspend when writing the RTC alarm fails. BugLink: https://github.com/systemd/systemd/issues/9988 Signed-off-by: Hans de Goede Signed-off-by: Alexandre Belloni

rtc: cmos: Remove the `use_acpi_alarm' module parameter for !ACPI

2018-10-04T09:15:57+00:00

Fix a problem with commit 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") defining `use_acpi_alarm' module parameter even for non-ACPI platforms, which ignore it. Wrap the definition into #ifdef CONFIG_ACPI and use a static inline wrapper function, hardcoded to return 0 and consequently optimized away for !ACPI, following the existing pattern with HPET handling functions. Signed-off-by: Maciej W. Rozycki Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Alexandre Belloni

rtc: cmos: Fix non-ACPI undefined reference to `hpet_rtc_interrupt'

2018-10-04T09:15:55+00:00

Fix a commit 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") `rtc-cmos' regression causing a link error: drivers/rtc/rtc-cmos.o: In function `cmos_platform_probe': rtc-cmos.c:(.init.text+0x33c): undefined reference to `hpet_rtc_interrupt' rtc-cmos.c:(.init.text+0x3f4): undefined reference to `hpet_rtc_interrupt' with non-ACPI platforms using this driver. The cause is the change of the condition guarding the use of `hpet_rtc_interrupt'. Previously it was a call to `is_hpet_enabled'. That function is static inline and has a hardcoded 0 result for non-ACPI platforms, which imply !HPET_EMULATE_RTC. Consequently the compiler optimized the whole block away including the reference to `hpet_rtc_interrupt', which never made it to the link stage. Now the guarding condition is a call to `use_hpet_alarm', which is not static inline and therefore the compiler may not be able to prove that it actually always returns 0 for non-ACPI platforms. Consequently the build breaks with an unsatisfied reference, because `hpet_rtc_interrupt' is nowhere defined at link time. Fix the problem by marking `use_hpet_alarm' inline. As the `inline' keyword serves as an optimization hint rather than a requirement the compiler is still free to choose whether inlining will be beneficial or not for ACPI platforms. Signed-off-by: Maciej W. Rozycki Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET") Cc: stable@vger.kernel.org # 4.18+ Signed-off-by: Alexandre Belloni