kernel/linux.git/drivers/rtc/Kconfig, branch linux-4.13.y

rtc: add generic nvmem support

2017-07-07T11:14:14+00:00

Many RTCs have an on board non volatile storage. It can be battery backed RAM or an EEPROM. Use the nvmem subsystem to export it to both userspace and in-kernel consumers. This stays compatible with the previous (non documented) ABI that was using /sys/class/rtc/rtcx/device/nvram to export that memory. But will warn about the deprecation. Signed-off-by: Alexandre Belloni

rtc: ds3232: add temperature support

2017-07-06T20:37:16+00:00

DS3232/DS3234 has the temperature registers with a resolution of 0.25 degree celsius. This enables to get the value through hwmon. # cat /sys/class/hwmon/hwmon0/temp1_input 37250 Signed-off-by: Kirill Esipov Signed-off-by: Alexandre Belloni

rtc: gemini/ftrtc010: rename driver and symbols

2017-07-06T20:37:15+00:00

The Gemini RTC is actually a generic IP block from Faraday Technology names FTRTC010. Rename the driver file and all symbols to match this IP name. The relationship can be clearly seen in the U-Boot driver posted by Po-Yu Chuang for the Faraday A320 board: https://lists.denx.de/pipermail/u-boot/2009-September/061326.html Remove the dependency on ARCH_GEMINI but select the driver for ARCH_GEMINI so we get a smooth transition. The IP block is synthsized on different silicon and architectures. Cc: Po-Yu Chuang Acked-by: Hans Ulli Kroll Signed-off-by: Linus Walleij Signed-off-by: Alexandre Belloni

rtc: brcmstb-waketimer: Add Broadcom STB wake-timer

2017-07-05T21:11:59+00:00

This adds support for the Broadcom STB wake-timer which is a timer in the chip's 27Mhz clock domain that offers the ability to wake the system (wake-up source) from suspend states (S2, S3, S5). It is supported using the rtc framework allowing us to configure alarms for system wake-up. Signed-off-by: Brian Norris Signed-off-by: Markus Mayer Signed-off-by: Florian Fainelli Signed-off-by: Arnd Bergmann Signed-off-by: Alexandre Belloni

rtc: sh: add support for rza series

2017-04-03T16:01:34+00:00

This same RTC is used in RZ/A series MPUs, therefore with some slight changes, this driver can be reused. Additionally, since ARM architectures require Device Tree configurations, device tree support has been added. Signed-off-by: Chris Brandt Reviewed-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni

rtc: cpcap: new rtc driver

2017-03-09T00:32:35+00:00

This driver supports the Motorola CPCAP PMIC found on some of Motorola's mobile phones, such as the Droid 4. Tested-by: Tony Lindgren Signed-off-by: Sebastian Reichel Acked-by: Rob Herring Signed-off-by: Alexandre Belloni

Merge tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux

2017-02-28T03:59:21+00:00

Pull RTC updates from Alexandre Belloni: "Subsystem: - constify rtc_class_ops structures New driver: - STM32 Drivers: - armada38x: fix errata, Armada 7K/8K support - ds3232: fix wakeup support - gemini: DT support - m48t86: huge cleanup and platform_data removal - mcp795: alarm support - sun6i: proper oscillator handling - tegra: proper clock handling - tps65910: calibration support" * tag 'rtc-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (44 commits) rtc: ds3232: Call device_init_wakeup before device_register rtc: pcf2127: bulk read only date and time registers. rtc: armada38x: Add support for Armada 7K/8K rtc: armada38x: Prepare driver to manage different versions rtc: ds3232: Add regmap max_register definition. rtc: ds3232: Cleanup whitespace around register and bit definitions. rtc: m48t86: remove unused platform_data ARM: Orion5x: ts78xx: allow rtc-m48t86 to manage it's own resources ARM: Orion5x: ts78xx: remove RTC detection ARM: ep93xx: ts72xx: allow rtc-m48t86 to manage its own resources rtc: m48t86: verify that the RTC is actually present rtc: m48t86: add NVRAM support rtc: m48t86: allow driver to manage its resources rtc: m48t86: shorten register name defines bindings: rtc: correct wrong reference in required properties rtc: sun6i: Fix return value check in sun6i_rtc_clk_init() rtc: sun6i: extend test coverage rtc: sun6i: Fix compatibility with old DT binding rtc: snvs: add a missing write sync rtc: bq32000: add support to enable disable the trickle charge FET bypass ...

rtc: sun6i: extend test coverage

2017-02-01T12:55:07+00:00

COMPILE_TEST was wrongly placed, move it to the "depends on" line. Also depend on COMMON_CLK as the driver now needs it to be properly compiled. Signed-off-by: Alexandre Belloni

rtc: jz4740: make the driver buildable as a module again

2017-01-26T22:03:21+00:00

By using kernel_halt() instead of machine_halt(), we can make the driver build as a module. However, jz4740 platforms not loading this module will not be able to power off. Suggested-by: Geert Uytterhoeven Signed-off-by: Alexandre Belloni Revert "rtc: jz4740: make the driver builtin only" This reverts commit b9168c539c0b2de756aaffd380384dbde8adbe07.

rtc: sun6i: Disable the build as a module

2017-01-24T17:45:29+00:00

Since we have to provide the clock very early on, the RTC driver cannot be built as a module. Make sure that won't happen. Cc: stable@vger.kernel.org Signed-off-by: Maxime Ripard Signed-off-by: Alexandre Belloni