kernel/linux.git/drivers/reset, branch v6.19.11

reset: gpio: suppress bind attributes in sysfs

2026-03-04T12:21:16+00:00

[ Upstream commit 16de4c6a8fe9ff497ca1aba33ef0dbee09f11952 ] This is a special device that's created dynamically and is supposed to stay in memory forever. We also currently don't have a devlink between it and the actual reset consumer. Suppress sysfs bind attributes so that user-space can't unbind the device because - as of now - it will cause a use-after-free splat from any user that puts the reset control handle. Fixes: cee544a40e44 ("reset: gpio: Add GPIO-based reset controller") Cc: stable@vger.kernel.org Signed-off-by: Bartosz Golaszewski Reviewed-by: Krzysztof Kozlowski Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

reset: canaan: k230: drop OF dependency and enable by default

2026-02-26T23:00:54+00:00

[ Upstream commit c7a5e01e229d21e0560d78bd645b4f7398667ce4 ] The driver doesn't use any symbols depending on CONFIG_OF, so drop the dependency. Also, enable it by default when ARCH_CANAAN is selected. Fixes: 360a7a647759 ("reset: canaan: add reset driver for Kendryte K230") Signed-off-by: Junhui Liu Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-12-08T00:38:52+00:00

Pull clk updates from Stephen Boyd: "This is entirely SoC clk drivers. The majority diff wise is for the new Rockchip and Qualcomm clk drivers which is mostly lines and lines of data structures to describe the clk hardware in these SoCs. Beyond those two, Renesas continues to incrementally add clks to their SoC drivers, causing them to show up higher in the diffstat this time because they added quite a few clks all over the place. Overall it is a semi-quiet release that has some new clk drivers and the usual fixes for clock data that was wrong or missing and non-critical cleanups that plug error paths or fix typos. New Drivers: - Qualcomm IPQ5424 Network Subsystem Clock Controller - Qualcomm SM8750 Video Clock Controller - Rockchip RV1126B and RK3506 clock drivers - i.MX8ULP SIM LPAV clock driver - Samsung ACPM (firmware interface) clock driver - Altera Agilex5 clock driver" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits) clk: keystone: fix compile testing clk: keystone: syscon-clk: fix regmap leak on probe failure clk: qcom: Mark camcc_sm7150_hws static clk: samsung: exynos-clkout: Assign .num before accessing .hws clk: rockchip: Add clock and reset driver for RK3506 dt-bindings: clock: rockchip: Add RK3506 clock and reset unit clk: actions: Fix discarding const qualifier by 'container_of' macro clk: spacemit: Set clk_hw_onecell_data::num before using flex array clk: visconti: Add VIIF clocks dt-bindings: clock: tmpv770x: Add VIIF clocks dt-bindings: clock: tmpv770x: Remove definition of number of clocks clk: visconti: Do not define number of clocks in bindings clk: rockchip: Add clock controller for the RV1126B dt-bindings: clock, reset: Add support for rv1126b clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll() clk: qcom: x1e80100-dispcc: Add USB4 router link resets dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750 dt-bindings: clock: qcom: Add SM8750 video clock controller clk: qcom: branch: Extend invert logic for branch2 mem clocks ...

Merge tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

2025-12-06T01:29:04+00:00

Pull SoC driver updates from Arnd Bergmann: "This is the first half of the driver changes: - A treewide interface change to the "syscore" operations for power management, as a preparation for future Tegra specific changes - Reset controller updates with added drivers for LAN969x, eic770 and RZ/G3S SoCs - Protection of system controller registers on Renesas and Google SoCs, to prevent trivially triggering a system crash from e.g. debugfs access - soc_device identification updates on Nvidia, Exynos and Mediatek - debugfs support in the ST STM32 firewall driver - Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI - Cleanups for memory controller support on Nvidia and Renesas" * tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits) memory: tegra186-emc: Fix missing put_bpmp Documentation: reset: Remove reset_controller_add_lookup() reset: fix BIT macro reference reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe reset: th1520: Support reset controllers in more subsystems reset: th1520: Prepare for supporting multiple controllers dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets reset: remove legacy reset lookup code clk: davinci: psc: drop unused reset lookup reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support reset: eswin: Add eic7700 reset driver dt-bindings: reset: eswin: Documentation for eic7700 SoC reset: sparx5: add LAN969x support dt-bindings: reset: microchip: Add LAN969x support soc: rockchip: grf: Add select correct PWM implementation on RK3368 soc/tegra: pmc: Add USB wake events for Tegra234 amba: tegra-ahb: Fix device leak on SMMU enable ...

Merge tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux

2025-12-04T20:33:38+00:00

Pull gpio updates from Bartosz Golaszewski: "There's one new driver, lots of various updates to existing ones, some refactoring support for new models and misc tweaks and fixes. The biggest new feature in GPIO core is adding support for managed, enable-counted sharing of GPIO pins, something that - until now - was only hacked around with the GPIOD_FLAGS_BIT_NONEXCLUSIVE request flag which basically allowed drivers to "fight it out" for the descriptor and provided no synchronization. It was enabled on Qualcomm platforms (and thus is enabled on arm64 defconfig) and I plan on removing GPIOD_FLAGS_BIT_NONEXCLUSIVE once all drivers using it are switched to the new mechanism. GPIO core: - add proper support for shared GPIOs that's aiming to replace the current sharing mechanism (which provides no synchronization ot enable counting) and enable it for Qualcomm platforms - improve the software node GPIO lookup by using the fwnode representation instead of the software node's name which was prone to bugs (GPIO controllers don't have to use the software node's name as their kernel label) - remove the last user of legacy-of-mm-gpiochip.h and drop the header - move closer to removing the legacy gpio_request_one() routine - rename some symbols for consistency - shrink GPIO printk() helpers by reusing existing code - remove some redundant kernel messages - use min() instead of min_t() in GPIO ACPI code - use system_percpu_wq instead of system_wq in GPIO character device code New drivers: - add a driver for the QIXIS FPGA GPIO controller Driver improvements: - use modernized variants of power management macros across a wide array of drivers in order to avoid having to use the __maybe_unused attribute - convert gpio-elkhartlake and reset-gpio to using the auxiliary bus instead of the platform bus as they are not really described in firmware - use lock guards and update symbol prefixes in gpio-mmio - support the bryx radio interface kit in gpio-mpsse + refactor the driver - use software nodes for configuring the reset-gpio driver, including setting up the reference to the shared "reset" pin - check and propagate the return value of gpiod_set_value() to user-space in gpio-virtuser (this was previously not possible as this function returned void) - extend the gpio-regmap helper with more features (bypass cache for aliased inputs, force writes for aliased data registers, add a new configuration parameter) - remove unneeded includes from gpio-aspeed and gpio-latch - add support for Tegra410 to gpio-tegra186 - replace PCI-specific PM with generic device-level PM in gpio-bt8xx - use dynamic GPIO range allocation in gpio-loongson-64bit - improve handling of level-triggered interrupts in gpio-pca953x - add suspend/resume support to gpio-fxl6408 - add support for more models to gpio-menz127 - optimize gpio-mvebu interrupt handling by avoiding unnecessary calls to mvebu_gpio_irq_handler() - make locking more consistent in gpio-grgpio Device-tree bindings: - document new NXP and Microchip models Documentation: - add a comprehensive compatibility and feature list for gpio-pca953x, which is a great addition as it's probably the most commonly used GPIO expander driver - kernel-doc tweaks Late fixes: - use BYTE_CTRL_MODE for 2K2000/3000 models in gpio-loongson" * tag 'gpio-updates-for-v6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (80 commits) gpio: loongson: Switch 2K2000/3000 GPIO to BYTE_CTRL_MODE gpio: regmap: fix kernel-doc notation gpio: shared: fix a deadlock gpio: shared-proxy: set suppress_bind_attrs gpio: shared: ignore GPIO hogs when traversing the device tree gpio: shared: ignore special __symbols__ node when traversing device tree gpio: shared: handle the reset-gpios corner case gpio: zynq: Use modern PM macros gpio: xilinx: Use modern PM macros gpio: xgene: Use modern PM macros gpio: uniphier: Use modern PM macros gpio: tqmx86: Use modern PM macros gpio: pch: Use modern PM macros gpio: omap: Use modern PM macros gpio: msc313: Use modern PM macros gpio: mlxbf2: Use modern PM macros gpio: ml-ioh: Use modern PM macros gpio: pl061: Use modern PM macros gpio: htc-egpio: Use modern PM macros gpio: brcmstb: Use modern PM macros ...

reset: gpio: use software nodes to setup the GPIO lookup

2025-11-20T15:51:49+00:00

GPIO machine lookup is a nice mechanism for associating GPIOs with consumers if we don't know what kind of device the GPIO provider is or when it will become available. However in the case of the reset-gpio, we are already holding a reference to the device and so can reference its firmware node. Let's setup a software node that references the relevant GPIO and attach it to the auxiliary device we're creating. Reviewed-by: Philipp Zabel Acked-by: Linus Walleij Acked-by: Greg Kroah-Hartman Signed-off-by: Bartosz Golaszewski Signed-off-by: Philipp Zabel

reset: gpio: convert the driver to using the auxiliary bus

2025-11-20T15:51:48+00:00

As the reset-gpio devices are purely virtual and never instantiated from real firmware nodes, let's convert the driver to using the - more fitting - auxiliary bus. Reviewed-by: Philipp Zabel Acked-by: Linus Walleij Acked-by: Greg Kroah-Hartman Signed-off-by: Bartosz Golaszewski Signed-off-by: Philipp Zabel

reset: make the provider of reset-gpios the parent of the reset device

2025-11-20T15:51:48+00:00

Auxiliary devices really do need a parent so ahead of converting the reset-gpios driver to registering on the auxiliary bus, make the GPIO device that provides the reset GPIO the parent of the reset-gpio device. To that end move the lookup of the GPIO device by fwnode to the beginning of __reset_add_reset_gpio_device() which has the added benefit of bailing out earlier, before allocating resources for the virtual device, if the chip is not up yet. Reviewed-by: Philipp Zabel Acked-by: Linus Walleij Acked-by: Greg Kroah-Hartman Signed-off-by: Bartosz Golaszewski Signed-off-by: Philipp Zabel

reset: order includes alphabetically in reset/core.c

2025-11-20T15:51:48+00:00

For better readability and easier maintenance order the includes alphabetically. Reviewed-by: Philipp Zabel Acked-by: Linus Walleij Acked-by: Greg Kroah-Hartman Signed-off-by: Bartosz Golaszewski Signed-off-by: Philipp Zabel

reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe

2025-11-18T16:52:54+00:00

The devm_regmap_field_alloc() function never returns NULL, it returns error pointers. Update the error checking to match. Fixes: 58128aa88867 ("reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY") Signed-off-by: Dan Carpenter Reviewed-by: Claudiu Beznea Signed-off-by: Philipp Zabel