kernel/linux.git/drivers/reset/Makefile, branch v6.19.11

reset: eswin: Add eic7700 reset driver

2025-11-18T16:52:54+00:00

Add support for reset controller in eic7700 series chips. Provide functionality for asserting and deasserting resets on the chip. Signed-off-by: Yifeng Huang Signed-off-by: Xuyang Dong Reviewed-by: Philipp Zabel Signed-off-by: Philipp Zabel

reset: aspeed: register AST2700 reset auxiliary bus device

2025-08-14T10:17:45+00:00

The AST2700 reset driver is registered as an auxiliary device due to reset and clock controller share the same register region. Signed-off-by: Ryan Chen Reviewed-by: Philipp Zabel Link: https://lore.kernel.org/r/20250708052909.4145983-3-ryan_chen@aspeedtech.com Signed-off-by: Philipp Zabel

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

2025-07-31T20:36:27+00:00

Pull clk updates from Stephen Boyd: "This is the usual collection of primarily clk driver updates. The big part of the diff is all the new Qualcomm clk drivers added for a few SoCs they're working on. The other two vendors with significant work this cycle are Renesas and Amlogic. Renesas adds a bunch of clks to existing drivers and supports some new SoCs while Amlogic is starting a significant refactoring to simplify their code. The core framework gained a pair of helpers to get the 'struct device' or 'struct device_node' associated with a 'struct clk_hw'. Some associated KUnit tests were added for these simple helpers as well. Beyond that core change there are lots of little fixes throughout the clk drivers for the stuff we see every day, wrong clk driver data that affects tree topology or supported frequencies, etc. They're not found until the clks are actually used by some consumer device driver. New Drivers: - Global, display, gpu, video, camera, tcsr, and rpmh clock controller for the Qualcomm Milos SoC - Camera, display, GPU, and video clock controllers for Qualcomm QCS615 - Video clock controller driver for Qualcomm SM6350 - Camera clock controller driver for Qualcomm SC8180X - I3C clocks and resets on Renesas RZ/G3E - Expanded Serial Peripheral Interface (xSPI) clocks and resets on Renesas RZ/V2H(P) and RZ/V2N - SPI (RSPI) clocks and resets on Renesas RZ/V2H(P) - SDHI and I2C clocks on Renesas RZ/T2H and RZ/N2H - Ethernet clocks and resets on Renesas RZ/G3E - Initial support for the Renesas RZ/T2H (R9A09G077) and RZ/N2H (R9A09G087) SoCs - Ethernet clocks and resets on Renesas RZ/V2H and RZ/V2N - Timer, I2C, watchdog, GPU, and USB2.0 clocks and resets on Renesas RZ/V2N Updates: - Support atomic PWMs in the PWM clk driver - clk_hw_get_dev() and clk_hw_get_of_node() helpers - Replace round_rate() with determine_rate() in various clk drivers - Convert clk DT bindings to DT schema format for DT validation - Various clk driver cleanups and refactorings from static analysis tools and possibly real humans - A lot of little fixes here and there to things like clk tree topology, missing frequencies, flagging clks as critical, etc" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (216 commits) clk: clocking-wizard: Fix the round rate handling for versal clk: Fix typos clk: spacemit: ccu_pll: fix error return value in recalc_rate callback clk: tegra: periph: Make tegra_clk_periph_ops static clk: tegra: periph: Fix error handling and resolve unsigned compare warning clk: imx: scu: convert from round_rate() to determine_rate() clk: imx: pllv4: convert from round_rate() to determine_rate() clk: imx: pllv3: convert from round_rate() to determine_rate() clk: imx: pllv2: convert from round_rate() to determine_rate() clk: imx: pll14xx: convert from round_rate() to determine_rate() clk: imx: pfd: convert from round_rate() to determine_rate() clk: imx: frac-pll: convert from round_rate() to determine_rate() clk: imx: fracn-gppll: convert from round_rate() to determine_rate() clk: imx: fixup-div: convert from round_rate() to determine_rate() clk: imx: cpu: convert from round_rate() to determine_rate() clk: imx: busy: convert from round_rate() to determine_rate() clk: imx: composite-93: remove round_rate() in favor of determine_rate() clk: imx: composite-8m: remove round_rate() in favor of determine_rate() clk: qcom: Remove redundant pm_runtime_mark_last_busy() calls clk: imx: Remove redundant pm_runtime_mark_last_busy() calls ...

reset: spacemit: add support for SpacemiT CCU resets

2025-07-07T13:54:16+00:00

Implement reset support for SpacemiT CCUs. A SpacemiT reset controller device is an auxiliary device associated with a clock controller (CCU). This patch defines the reset controllers for the MPMU, APBC, and MPMU CCUs, which already define clock controllers. It also adds RCPU, RCPU2, and ACPB2 CCUs, which only define resets. Signed-off-by: Alex Elder Reviewed-by: Philipp Zabel Reviewed-by: Yixun Lan Acked-by: Philipp Zabel Link: https://lore.kernel.org/r/20250702113709.291748-6-elder@riscstar.com Signed-off-by: Yixun Lan

reset: canaan: add reset driver for Kendryte K230

2025-06-27T15:45:51+00:00

Add support for the resets on Canaan Kendryte K230 SoC. The driver support CPU0, CPU1, L2 cache flush, hardware auto clear and software clear resets. Tested-by: Chen Wang Reviewed-by: Philipp Zabel Signed-off-by: Junhui Liu Link: https://lore.kernel.org/r/20250613-k230-reset-v4-2-e5266d2be440@pigmoral.tech Signed-off-by: Philipp Zabel

reset: Add USB2PHY port reset driver for Renesas RZ/V2H(P)

2025-05-05T13:18:35+00:00

Implement a USB2PHY port reset driver for the Renesas RZ/V2H(P) SoC. Enable control of USB2.0 PHY reset and power-down operations, including assert and deassert functionalities for the PHY. Leverage device tree (OF) data to support future SoCs with similar USB2PHY hardware but varying register configurations. Define initialization values and control register settings to ensure flexibility for upcoming platforms. Signed-off-by: Lad Prabhakar Reviewed-by: Biju Das Reviewed-by: Fabrizio Castro Link: https://lore.kernel.org/r/20250415195131.281060-3-prabhakar.mahadev-lad.rj@bp.renesas.com Signed-off-by: Philipp Zabel

reset: thead: Add TH1520 reset controller driver

2025-04-07T08:19:27+00:00

Add reset controller driver for the T-HEAD TH1520 SoC that manages hardware reset lines for various subsystems. The driver currently implements support for GPU reset control, with infrastructure in place to extend support for NPU and Watchdog Timer resets in future updates. Reviewed-by: Philipp Zabel Signed-off-by: Michal Wilczynski Link: https://lore.kernel.org/r/20250303152511.494405-3-m.wilczynski@samsung.com Signed-off-by: Philipp Zabel

reset: imx: Add SCU reset driver for i.MX8QXP and i.MX8QM

2025-03-13T08:06:27+00:00

Add System Controller Firmware(SCU) reset driver for i.MX8QM and i.MX8QXP. SCU Manage resets for peripherals such as MIPI CSI. Currently, support two reset sources: IMX_SC_R_CSI_0 and IMX_SC_R_CSI_1. Signed-off-by: Frank Li Link: https://lore.kernel.org/r/20250210-8qxp_camera-v3-2-324f5105accc@nxp.com Signed-off-by: Philipp Zabel

reset: amlogic: move drivers to a dedicated directory

2024-10-01T08:40:32+00:00

The meson reset driver will be split in two part, one implemeting the ops, the other providing the platform driver support. This will be done to facilitate the addition of the auxiliary bus support. To avoid making a mess in drivers/reset/ while doing so, move the amlogic reset drivers to a dedicated directory. Reviewed-by: Neil Armstrong Signed-off-by: Jerome Brunet Reviewed-by: Philipp Zabel Link: https://lore.kernel.org/r/20240910-meson-rst-aux-v5-7-60be62635d3e@baylibre.com Signed-off-by: Philipp Zabel

reset: eyeq: add platform driver

2024-09-02T10:12:41+00:00

Add Mobileye EyeQ reset controller driver, for EyeQ5, EyeQ6L and EyeQ6H SoCs. Instances belong to a shared register region called OLB and gets spawned as auxiliary device to the platform driver for clock. There is one OLB instance for EyeQ5 and EyeQ6L. There are seven OLB instances on EyeQ6H; three have a reset controller embedded: - West and east get handled by the same compatible. - Acc (accelerator) is another one. Each instance vary in the number and types of reset domains. Instances with single domain expect a single cell, others two. Signed-off-by: Théo Lebrun Link: https://lore.kernel.org/r/20240730-mbly-reset-v2-2-00b870a6a2ff@bootlin.com Signed-off-by: Philipp Zabel